LR12-SCAND (1998-04) Jonsered Lawn Tractor - Parts

This OEM-certified washer provides support, spacing, and reduces friction between parts in your lawn equipment, typically working alongside bolts or screws. This washer has a thickness of 16 gauge and dimensions of 25/32 x 1-5/8 inches. A damaged washer will look deformed or cracked, leading to parts becoming loose or not fitting properly...Read more in your machine. When you remove a broken washer from your machine, you will need pliers or a wrench to loosen the bolt or screw securing it. Once the fastener has been removed, you can pry the washer with a screwdriver. It is important to know that this washer is sold individually. Before adding this replacement part into your cart, check your instruction manual to determine the number of washers your machine needs.

This genuine replacement mandrel stripper is sourced directly from the original manufacturer and is designed for use with riding lawn mowers and garden tractors. It functions as a mounting bracket between the mandrel assembly and the mower deck, while also serving to protect the mandrel housing and bearing from debris buildup. By preve...Read morenting grass and debris accumulation, this part helps extend the life of your mower’s mandrel components. Made from durable metal, this item is sold individually. Installation Tip: A wrench is required to complete the repair. Be sure to consult your model’s diagram to ensure proper fit and placement.

This metal square key is designed to prevent the rear wheel of your lawn equipment from slipping. Approximately sized at 3/16 x 2, it fits into the groove found on the axle and the hub of the wheel, ensuring proper alignment of the two parts. If the machine becomes hard to turn or maneuver or it makes a grinding or clicking sound, your sq...Read moreuare key may be worn out. Visually inspecting this part for bends and cracks can confirm this. You may also notice that the rear wheel is wobbling or falling off. A worn square key can cause damage to the wheel assembly of the machine, leading to costly repairs or even the need to purchase a new one. To prevent that, you need to replace a broken square key as soon as possible. Replacing the square key is a simple process. After turning your lawn equipment off and letting it cool down, you need to use a jack to lift the rear of it off the ground. Remove the wheel from the axle by using a socket to remove any bolts or nuts holding it in place. With pliers, you can then take the square key off the machine. This replacement part is sold individually and is sourced directly from its original manufacturer.

It is a genuine manufacturer-approved part which is specially designed for use with Poulan, Weed Eater and Husqvarna riding lawn mowers and garden tractors. The purpose of the interlock switch is to act as a safety feature which will shut the engine off if the driver leaves the seat. Unfortunately, over time parts will wear out and it may...Read more begin to fail eventually requiring a replacement. Refer to the owners manual and the appropriate diagrams of your model for the correct location and installation of this component. Note, this high-quality plastic body switch is sold individually. You may need a screwdriver and pliers to perform this repair.

It is an authentic replacement cap-spindle that is supplied by the original equipment manufacturer for use with Poulan, Ryobi and Husqvarna riding lawn mowers and garden tractors. It is an identical replacement for a missing or damaged cap that was originally installed on a new equipment. The cap is utilized to cover the spindle. Make sur...Read moree to check the appropriate diagrams of your model for the exact location and application of this hardware. This high-quality cap-spindle is made of durable plastic material and is sold individually.

This genuine OEM compression seat spring provides support and cushioning for the seat of your lawn equipment. It also effectively absorbs shocks and vibrations from uneven terrain. Typically, you can find it connected to the seat frame on the fender of your machine. If one or both springs are broken, your seat may feel unstable or uneven,...Read more compromising your comfort. It is essential to replace any damaged springs to restore a smoother ride. To replace the spring, gather a socket or wrench. Ensure your machine is turned off and engage the parking brake. Consult your user guide to locate the spring, which may be accessible from the underside of the seat or by removing the seat cushion. Use the socket or wrench to remove the fasteners securing the spring. Lift the spring off your machine carefully. Remember, different springs are used in your machine, so refer to the parts diagram to order the correct part. Also, note that this replacement part is sold individually, so confirm how many springs your machine requires beforehand.

This lightbulb is supplied by the original manufacturer and intended for use in lawn tractors and riding mowers with a 12-volt system. It is positioned on the front of the equipment as part of the equipment lighting system. The lightbulb illuminates the area allowing for improved visibility when working in low-light conditions. The lightb...Read moreulb can fail due to various reasons, such as burnout, electrical issues, or physical damage. Once the lightbulb stops functioning, visibility will be reduced which makes it difficult to safely operate the equipment. Before you begin the repair, disconnect your equipment from the power source to avoid electrical hazards. Remove the bulb housing cover, and carefully unscrew the old bulb. Thread the new bulb into the housing and ensure that it is securely seated. Finally, reattach the housing cover, reconnect the power supply, and test the new bulb. Note that this bulb is part of a dual usage system, therefore ensure that you order at least two as each bulb is sold individually.

This is an authentic part that is supplied directly from the original equipment manufacturer for Craftsman lawn tractors. The blade bolt is used to secure the mulching blade. In order to replace the bolt, a socket wrench will be needed to remove the bolt from the mulching blade. This part is made of metal and is sold individually.

This is an authentic replacement part sourced directly from the manufacturer. The cap is commonly found in Craftsman lawn tractors. This part is placed on the end of the torsion spring to keep it from damaging the deflector shield. You may require a wrench and pliers when replacing this item. The cap is available as an individual replacement part.

This is a genuine replacement part sourced from the original manufacturer for use with riding lawn mowers and lawn tractors made by Husqvarna, Poulan, Weedeater, Ryobi and Jonsered. This part helps keep the wheels on the tractor or lawn mower in alignment. You may need a screw driver or pliers to replace this part. This rod tie is sold individually and made of metal.

Original Manufacturer Approved replacement Mandrell Shaft Assembly used on Lawn Tractors/Mowers. Includes all Metal shaft assembly, bearing, and nut. The Mandrel shaft is secured in Mandrel Housing and it goes through the deck and the pulleys are attached to it. Then the belt that drives the mandrels is placed on the pulleys. When replaci...Read moreng this part, First remove the Blade from the Mandrel Shaft. The Mandrel Assembly is easily detached by removing the three Washer Head Screws from above the Mandrel Housing on the Mower Deck . You will need to remove the Nut that is attached to the Mandrel Shaft, which is located above the Mandrel Pulley. The complete Mandrel Assembly should come right out now. Remove old Shaft from the Housing and place a new one in place of it. Re-attach the now Complete Mandrel Assembly back to the deck and attach pulleys, belts and blades.