EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

KUCS181B0 KitchenAid Trash Compactor - Instructions

All Instructions for the KUCS181B0
31 - 45 of 117

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
catch was missing to close dryer door
2 of 4 people found this instruction helpful.
  • DONNA from SAN LORENZO, CA
  • Really Easy
  • Less than 15 mins
The only thing I had to do was hammer the catch inside the square fitting and presto it was done. It took me less than 3 mins. I thought I might of needed instructions, but it was really simple. Even a guy can do it. (smile)
Was this helpful?
Thank you for voting!
dryer door wouldn't catch, catch was broken
1 person found this instruction helpful.
  • Theodore from Tyler, TX
  • Really Easy
  • Less than 15 mins
took the cstch reciever out, with my fingers, pushed the new one in, snap lock fit.......couldn't be better, like repairing a model T ford.......
Was this helpful?
Thank you for voting!
broken door catch
2 of 4 people found this instruction helpful.
  • Michael from Goddard, KS
  • Really Easy
  • Less than 15 mins
the part fit perfectly, it just snaped right into place.
Was this helpful?
Thank you for voting!
door latch broke
1 person found this instruction helpful.
  • Debra from Oakland, NJ
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Pop out the old latch and replaced with a new one
Was this helpful?
Thank you for voting!
door catch broke therefore dryer door would not close
1 person found this instruction helpful.
  • vernette from sprague, WA
  • Really Easy
  • Less than 15 mins
just put the new part in the door---sooo easy! THANK YOU!
Was this helpful?
Thank you for voting!
Dryer Door Wouldn't Shut
1 of 2 people found this instruction helpful.
  • Megan from Kettering, OH
  • Really Easy
  • Less than 15 mins
My husband is the one who fixed the door. He said he just popped it into place and was done in just a couple of seconds! The best part though was the quick service we received. . . I ordered the part around 10:30 in the morning, and it was at my front door by 5pm the next day!!! What great service!!!! We will definitely do business a gain with partselect. Com if we ever need more parts.
Was this helpful?
Thank you for voting!
The latch on my dryer door wasn't working. I was having to shove a towel in the door to get it to stay shut until I was able to repair it.
1 of 2 people found this instruction helpful.
  • Dan from Lockport, LA
  • Really Easy
  • Less than 15 mins
All I had to do was get the model number off of the dryer and plug that information in online and within a couple of days the part arrived. It was great! There were directions that came with the part that explained how to replace the old latch with the new one.

I remember in the "olden days" when I would of had to call a repai r guy out and paid a lot more than the $12.00 I did to replace the part myself. And, the only reason it was $12.00 dollars instead of $5-6 was because I had it shipped overnight.

Awesome!
Was this helpful?
Thank you for voting!
The dryer door catch wouldn't hold the door closed
1 of 2 people found this instruction helpful.
  • Gerald from Thompsonville, MI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I ordered the door catch kit on a Wednesday at it arrived Saturday AM. It took less than 1 minute to pry out the old catch with a flat screwdriver and pop in the new one!
Was this helpful?
Thank you for voting!
Door wouldn't fasten shut
1 of 2 people found this instruction helpful.
  • Susan from Laingsburg, MI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Popped the latch out and popped a new one in.

The real story here is that there was an ANSWER and a SOLUTION, to what was a GREAT
annoyance. If I wouldn't have found a part, I may have run off and bought a new dryer, when I really didn't need to, or paid A LOT of money for a repair man to come out. THANK YOU for your se rvice. You made my life easier.
Was this helpful?
Thank you for voting!
Dryer door wouldn't shut
1 of 2 people found this instruction helpful.
  • Amy from Cumberland, RI
  • Really Easy
  • Less than 15 mins
The door catch kit is soo easy. They give you instructions on which one to use depending on your dryer and it fit perfectly into the door. This was great especially since it was so inexpensive! My husband thought we would have to replace the door.
Was this helpful?
Thank you for voting!
The male part of the door catch was broken
1 of 2 people found this instruction helpful.
  • David from Chhicago, IL
  • Really Easy
  • Less than 15 mins
Simply installed the piece and I was done. Took 10 seconds.
Was this helpful?
Thank you for voting!
Dryer door kept opening
1 of 2 people found this instruction helpful.
  • Jennifer from Big Timber, MT
  • Easy
  • Less than 15 mins
  • Screw drivers
Popped out the old door catch kit and replaced it with the new one! Easy!!
Was this helpful?
Thank you for voting!
Door keeps opening while operating
1 of 2 people found this instruction helpful.
  • Carmine from MASSAPEQUA PK, NY
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Removed old catch and strike with screwdriver and needle nose pliers. Installed new parts. My old catch did not have comparible numbers so I just used the yellow one. Worked fine.
Was this helpful?
Thank you for voting!
Top door of machine would not latch
1 of 2 people found this instruction helpful.
  • Marcia from Prairie Village, KS
  • Very Difficult
  • 1- 2 hours
  • Pliers, Screw drivers
Replaced the old latch knob and installed the new one by twisting it in by hand . That was easy. The part in the door itself was not holding the new latch knob. I tried unsuccessfully to take the door apart to install the new part that goes in the door and grabs the knob. When that didn't work, I stuck what looked like an alternative to replacing that part into the old part. It was a flexible part that was supposed to catch the knob. That worked for a while and then came out. Unfortunately, I'm back to putting a piece of cardboard between the door to make it stay up.
Was this helpful?
Thank you for voting!
The dryer door kept popping open while in use.
0 of 1 people found this instruction helpful.
  • Joseph from Margate, FL
  • Easy
  • 15 - 30 mins
I googled the problem, then came across a site where somebody had experienced the same problem, and they changed the door catches to resolve it. I did a search for Whirlpool parts and found "partselect.com". I followed the instructions on the website and located the parts very easily and also discovered that there was a video on how to ma ke this repair. We were tolerating this problem for quite some time and now the problem is resolved, thank you...
Was this helpful?
Thank you for voting!
All Instructions for the KUCS181B0
31 - 45 of 117