Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The old coupling melted and the tray cracked in half.
2 of 4 peoplefound this instruction helpful.
Diane from Sheridan, AR
Really Easy
Less than 15 mins
It took me 15 minutes total - 5 minutes to clean the microwave, 1 minute to install three new parts, and 9 minutes to enjoy my celebratory glass of wine!
Drive coupling cracked would no longer rotate turntable plate
1 personfound this instruction helpful.
Edward from CENTENNIAL, CO
Very Easy
Less than 15 mins
Screw drivers
used screw driver to pry up old part. lifted right off. line up drive couple drive push on. repair took less than 1 minute to repair. works like new Very Pleased with Parts Select replacement parts
Was this helpful?
Thank you for voting!
One of the wheels came off
1 personfound this instruction helpful.
Paul from EXETER, NH
Very Easy
Less than 15 mins
Took out turntable and swapped out old one with a new bright and shiny New one, ring that is. It was easy using the part from parts select Thanks Paul
Was this helpful?
Thank you for voting!
Very unusual. we had a brief fire inside the microwave which destroyed all the moving rotary parts.
1 personfound this instruction helpful.
Jan from ELK GROVE, CA
Really Easy
Less than 15 mins
First, we had to clean up all the interior surfaces, which was just cleaning. There was no internal damage. Then, just setting the center connector, rotary rollers and glass plate. Simple
Broke rotating plate, it fell off counter after being washed
2 of 4 peoplefound this instruction helpful.
Lois P from Morris, IL
Really Easy
Less than 15 mins
Opened door and put new plate in.
Placed order on Thursday evening and received Sat Am
Was this helpful?
Thank you for voting!
Loud noise
1 personfound this instruction helpful.
Cynthia from DRIPPING SPGS, TX
Really Easy
15 - 30 mins
Screw drivers
Changed out turntable motor
Was this helpful?
Thank you for voting!
Replaced a broken vent grill on my microwave
1 personfound this instruction helpful.
Rosario from PORT ST LUCIE, FL
Very Easy
15 - 30 mins
Screw drivers
Replaced a broken vent grill on my microwave
Was this helpful?
Thank you for voting!
Micro Wave Steamer
1 personfound this instruction helpful.
James from MIAMI, FL
Very Easy
Less than 15 mins
I spoke to Daily via the phone and I ordered a new steamer since my original steamer cracked over a period of time. No installation, no problems I just recently used it and works perfectly! Thank You!
Was this helpful?
Thank you for voting!
Microwave turn table turns with door open, light on when unit off and door shut, slamming the door restored normal operation for a while.
1 personfound this instruction helpful.
Gregory from Barnwell, SC
Easy
30 - 60 mins
Screw drivers
Based on other similar posted repairs, I purchased the bottom switch. Upon removing the control panel to replace the switch, I found the blue 22 gauge wire was broken at the spade terminal. This wire had been crimped to the terminal along with a 14 gauge wire. Apparently the force to crimp the thicker wire weakened the smaller wire at
... Read morethe terminal. I stripped the end of the small blue wire and reattached it to the thicker wire using a solder iron and solder. The repair fixed the problem.
Read less
Was this helpful?
Thank you for voting!
Mounting plate support edge broken
1 of 2 peoplefound this instruction helpful.
Glen from GLIDDEN, WI
Really Easy
30 - 60 mins
Screw drivers
I removed the microwave to install a back splash and found the support edge on the backplate had broken off and was missing. I searched for parts for the microwave and found them on PartsSelect.com. Easy to order, and was shipped promptly.
Once the part arrived, install was simple, lining up the existing holes. The only hard p
... Read moreart was setting the microwave up on the bracket due to the weight and awkwardness of the microwave.
Overall a very simple repair.
Read less
Was this helpful?
Thank you for voting!
handle need to be replaced
1 of 2 peoplefound this instruction helpful.
Gary from SPRING VALLEY, CA
A Bit Difficult
30 - 60 mins
Screw drivers
watched a couple u tube videos, the one that helped the most I copied below. Was a different problem but showed how to get the door apart. when I order the person suggested parts I didn't need ($12).
Burned out light bulb which lit the surface of the range.
1 of 2 peoplefound this instruction helpful.
Michael J from LORAIN, OH
Very Easy
Less than 15 mins
Screw drivers
Unscrewed glass panel, removed old bulb, cleaned glass panel and installed new bulb. Screwed panel back into place.
Was this helpful?
Thank you for voting!
Replaced the charcoal filter.
2 of 5 peoplefound this instruction helpful.
John from BILLINGS, MT
Really Easy
15 - 30 mins
Screw drivers
On top front of the microwave are two Philip's head screws holding the rail on. Remove these screws and the rail snap out the old filter (noting the dark side down) then snapping the new filter in. Replace rail. 10 to 15 minute task.
Was this helpful?
Thank you for voting!
Glass tray shattered
1 of 2 peoplefound this instruction helpful.
Mouang from Sacramento, CA
Easy
Less than 15 mins
Ordered the glass tray and installed it. Received the orderin about two days.
Was this helpful?
Thank you for voting!
I noticed that the hood lights were out.
1 of 2 peoplefound this instruction helpful.
linda from brockton, MA
Really Easy
Less than 15 mins
Screw drivers
I took off the glass panel underneath the microwave and replaced the 2 bulbs in less than 3 minutes by myself with only a phillips head screwdriver. I was very pleased with the service I received and more pleased with myself that I did not have to call in a repair man.
My Orders
