KGCT366EBL0 KitchenAid Cooktop - Parts

These pads go on the bottom of your gas cooktop grates to prevent them from moving and scratching the top of your appliance.

The knob skirt or grommet on your range goes around the knob, forming a buffer between it and the range surface. If your knob skirt is damaged, you should consider replacing it. This product is approximately 2 inches in diameter. This part is made of black plastic, and is sold individually. Many of our customers have described this repair...Read more as very easy. To complete the repair, simply remove the burner knob and the old knob skirt, replace it with the new knob skirt and re-attach the burner knob. The product contains four locking tabs that should snap into place easily.

This white knob skirt is located between the glass top and the control knobs of your stove top. The skirt has an outside diameter of approximately 2 inches. The most common reasons to replace the timer knob skirt is if it is cracked or damaged, or if the timer assembly will not advance. This repair is a relatively simple one, but be caref...Read moreul not to snap the plastic clips when you are inserting the new knob skirt into place. This genuine OEM replacement knob skirt is sold individually.

This part is a black plastic knob that is most often used as a burner control knob. This knob allows you to turn the burner on your range or cooktop on, and it allows you to control the temperature of the burner. If your knob is broken, damaged, or lost, this is the replacement part you will need. This knob accepts a d-shaped shaft. To su...Read moreccessfully install this part, line the flat edge of the shaft up with the hole in the knob, then simply press the knob onto the shaft and into place. This knob is sold individually.

Sold individually. This knob can accept a D-shaped shaft.

This part helps your burner ignite and produce flame.

Sold individually. This knob takes a D-shaped shaft.

NOTE: No longer available in biscuit or white. Black only.

Sold individually.

Part is located on top of the igniter switch that's next to the gas valve. Helps regulate gas flow and the amount of normal leakage that may occur.

The Spark Module WPW10110486 is a genuine OEM replacement part designed for Whirlpool gas ranges and compatible models from KitchenAid, Maytag, Amana, Jenn-Air, and Magic Chef. This module controls the ignition process for the surface burners by generating the electrical spark needed to ignite the gas. It features a terminal configuration...Read more of three 3/16" terminals and six 1/8" terminals. Common signs that this part may need replacement include burners that click without igniting, inconsistent sparking, or no spark at all. For installation, be sure to disconnect both the power and gas supply before beginning. The module should be mounted in the designated control area, with terminals connected according to the appliance’s wiring diagram. Always refer to your appliance’s service manual for model-specific guidance.