Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken inside oven door glass
4 of 11 peoplefound this instruction helpful.
Bobby from Waterloo, SC
Easy
15 - 30 mins
Screw drivers
We followed the instructions given by Parts Service. The only problem we had (Whirlpool left two screws out of spacer bracket and it fell out requiring further removable of inner glass to replace spacer. Process took about twenty minutes.
Was this helpful?
Thank you for voting!
I snapped a bolt on the main power terminal block when connecting the pigtail.
3 of 8 peoplefound this instruction helpful.
Frank from Palm Coast, FL
Easy
15 - 30 mins
Screw drivers, Socket set
Removed the small metal panel covering the main power terminal in back of the electric range. Removed the nuts holding the red, white and black electrical wires from the range using the appropriate socket (there will be two nuts on each bolt end). Removed the two screws holding the main power terminal block with appropriate screw driver.
... Read moreConnect the new main power terminal block to the range using the two screws. Reconnect the red, black and white electrical wires coming from the range using one nut for each wire. IMPORTANT: do no over tighten the nuts because the bolts could snap. Reconnect the pigtail and secure the small metal panel covering the main power panel.
Read less
Was this helpful?
Thank you for voting!
Microwave cooking glass broken
1 of 2 peoplefound this instruction helpful.
Navid from Dunn Loring, VA
Really Easy
Less than 15 mins
Easily replaced after received the product from Part Select. Very satisfied.
Was this helpful?
Thank you for voting!
Broken cooking tray
1 of 2 peoplefound this instruction helpful.
David from Oxnard, CA
Really Easy
Less than 15 mins
Replaced the glass tray
Was this helpful?
Thank you for voting!
glass tray missing
1 of 2 peoplefound this instruction helpful.
Carol from Phoenix, AZ
Really Easy
Less than 15 mins
found the part no. and ordered it. it was delivered fast and efficient. tracking was also helpful. thanks
Was this helpful?
Thank you for voting!
broken glass dish for microwave
1 of 2 peoplefound this instruction helpful.
Janet from Concord, CA
Really Easy
Less than 15 mins
no repair needed - ordered part, came within 3 days - very satisfied
Was this helpful?
Thank you for voting!
The side trim on the glass door needed to be replaced.
1 of 2 peoplefound this instruction helpful.
Mary from LARAMIE, WY
Easy
Less than 15 mins
Screw drivers
After we put the latch pins in, the door was easily lifted off. We placed the door on the table and unscrewed the trim pieces. The new trim pieces went into place after we cleaned the door. We slipped the door back on the oven and removed the hinge pins.
Was this helpful?
Thank you for voting!
Oven light bulb inop
1 of 2 peoplefound this instruction helpful.
Ed from Canyon Country, CA
Easy
Less than 15 mins
Taking off the glass lense for the light bulb was harder than I thought. It unscrews counterclockwise, but it was very hard to get off. It would not turn. I ended up using connector pliers I use for work, that has rubber jaws. The lense unscrewed very easy with it. Light also unscrews out. PartSelect.com is the only way to go to buy parts
... Read more for appliances. It is simple, even has the illustrated parts catalog. And it saves a lot of time and gas, driving around looking for the part!!. PartSelect came through again.
Read less
Was this helpful?
Thank you for voting!
broiler pan missing
1 of 2 peoplefound this instruction helpful.
RAYMOND from JACKSONVILLE, FL
Really Easy
Less than 15 mins
ordered new broiler pan
Was this helpful?
Thank you for voting!
Old microwave glass tray shattered while warming a hard-boiled egg.
1 of 2 peoplefound this instruction helpful.
Raymond from HINSDALE, IL
Very Easy
Less than 15 mins
I took the new tray out of the box and placed it in the microwave oven.. No tools needed.
Was this helpful?
Thank you for voting!
broke the plate
1 of 2 peoplefound this instruction helpful.
Richard from MURFREESBORO, TN
Really Easy
Less than 15 mins
took the plate out of the shipping box, inserted it in the microwave
We had to remove screws from the vent covers above and below the microwave, then there were 2 screws (one on each side) that attached the microwave to the oven. Once all of the screws were removed we had to pull the microwave out. Then we pulled the light cord out, removed the burnt out light and installed the new one. Then reversed the
... Read moresteps.
Read less
Was this helpful?
Thank you for voting!
The light bulb burnt out, the assembly was damaged by the rack sliding in and out
1 of 3 peoplefound this instruction helpful.
Robert from CLINTON, CT
Really Easy
Less than 15 mins
Screw drivers
This is a microwave/ Oven slide in unit. You DO NOT need to slide out the unit, the repair can be done from inside the oven. Just be careful on pulling the wires from the unit so they do not break. I used shrink wrap over the joints but you can use tape as long as it can take the temperatures
Was this helpful?
Thank you for voting!
Not heating up properly
1 of 3 peoplefound this instruction helpful.
Harmon from MONTICELLO, GA
Really Easy
30 - 60 mins
Pliers, Screw drivers
Installed a new thermostat and noticed the convection heating element wire had burned in two. Ordered new element and installed. Oven is currently working properly again.
Was this helpful?
Thank you for voting!
Missing Retainer and screw
4 of 13 peoplefound this instruction helpful.
Jan from Edmond, OK
Really Easy
Less than 15 mins
Screw drivers
Simple - Removed oven door attached retainer with screw.Re attached door.
Whirlpool wanted three time the cost of the same parts The only shipping option was Fedex Overnight which was very costly.
My Orders
