My Orders
KEBS276 KitchenAid - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
hole in filter
2 of 2 people
found this instruction helpful.
-
Robert from WESTCHESTER, IL
- Very Easy
- Less than 15 mins
took out old and placed in new
Was this helpful?
Thank you for voting!
replaced broken control knob
2 of 2 people
found this instruction helpful.
-
Cathy from DOVER, OH
- Easy
- Less than 15 mins
at first I couldn't get the knob on but after placing a little Vaseline on it, it went right on.
Was this helpful?
Thank you for voting!
light wont come on
4 of 9 people
found this instruction helpful.
-
James from Fort Collins, CO
- A Bit Difficult
- 1- 2 hours
-
Pliers, Screw drivers, Wrench set
Well, when you put the back cover on and screw it down make sure you have nothing touching the white wire leading to the oven light. I did and it blew the push switch when I threw the 220 breaker. Actually, the light was on when I came in the room, but when I pushed the switch on the front panel it sparked in the rear and popped the break
... Read more
er. Then I saw the short and when I tested the switch it would not click. The install was fine.
Read less
Was this helpful?
Thank you for voting!
broken bake element
2 of 3 people
found this instruction helpful.
-
James from Wilmington, IL
- Really Easy
- Less than 15 mins
-
Screw drivers
Remove to screws pull old element out, unplugged old element and plugged new element in. Replace screws and baked a cake
Was this helpful?
Thank you for voting!
bake element borke
2 of 3 people
found this instruction helpful.
-
Gerald from Memphis, TN
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Removed the old element and replaced it with the new element. Very straight forward
Was this helpful?
Thank you for voting!
Lint Filter With Hole In Mesh
2 of 3 people
found this instruction helpful.
-
KENNETH R from NORTH ARLINGTON, NJ
- Really Easy
- Less than 15 mins
Replaced with new part from PartSelect . Works Fine.
Was this helpful?
Thank you for voting!
Worn/Bulb Socket
2 of 4 people
found this instruction helpful.
-
JOSEPH from COON RAPIDS, MN
- Really Easy
- Less than 15 mins
-
Screw drivers
It was alittle difficult at 1st to remove the clips that held in the socket. But once out everything went smoothly.
Was this helpful?
Thank you for voting!
THE OVEN WAS NOT HEATING TO DESIRED TEMPERATURE
1 person
found this instruction helpful.
-
Heriberto from AUSTIN, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
DISCONNECTED POWER AND GAS TO THE RANGE. REMOVED 6 SCREWS FROM REAR OF THE RANGE. REMOVED THE 2 SCREWS HOLDING THE TEMPERATURE SENSOR IN PLACE. DISCONNECTED THE LEAD FOR THE SENSOR. INSTALLED NEW SENSOR IN REVERSE ORDER. OVEN WORKING PROPERLY NOW.
Was this helpful?
Thank you for voting!
Oven was overheating and locking the door. Codes indicated the temperature sensor could be the issue.
1 person
found this instruction helpful.
-
Margaret from PUTNAM VALLEY, NY
- Very Easy
- Less than 15 mins
-
Screw drivers
Only one screwdriver needed for this simple repair. Unfortunately for me it did not repair my oven and a new code on the oven indicated a bigger problem with computer board.
Part Select was great to work with and accepted a return and promptly refunded me for the part.
Thank you!
Part Select was great to work with and accepted a return and promptly refunded me for the part.
Thank you!
Was this helpful?
Thank you for voting!
We lost our knob, and it was very difficult to turn the fan on or off
1 person
found this instruction helpful.
-
Jennifer from Mesa, WA
- Really Easy
- Less than 15 mins
I googled Kitchenaid along with the model number and Parts Select came up. I then entered the model number along with what I wanted, and scrolled through different pictures until I found a sketch of my cooktop with individual numbers for each part. I selected the part, and rechecked the model number of the cooktop and ordered it. Fro
... Read more
m the time I ordered on-line, until I received it, was 3 days. I am very impressed with the service, and the knob fits perfectly! Thanks so much for the excellent service!
Read less
Was this helpful?
Thank you for voting!
Hole in old filter
1 person
found this instruction helpful.
-
Sharon from ACWORTH, GA
- Very Easy
- Less than 15 mins
Removed the old filter and slipped in the new one. Much nicer than original!
Was this helpful?
Thank you for voting!
Torn filter screen
1 person
found this instruction helpful.
-
Don from FENTON, MI
- Very Easy
- Less than 15 mins
Removed old and replaced with new.
Was this helpful?
Thank you for voting!
old lint filter
1 person
found this instruction helpful.
-
Wilfredo from ALLENTOWN, PA
- Very Easy
- Less than 15 mins
How was show in the video, very simple and fast, no tools.
Was this helpful?
Thank you for voting!
Lint Filter had a hole in it.
1 person
found this instruction helpful.
-
Kenneth from DENISON, TX
- Very Easy
- Less than 15 mins
Opened the door, removed old filter, put in new filter, closed the door.
Was this helpful?
Thank you for voting!
Lint Filter was deteriorated
1 person
found this instruction helpful.
-
Clyde from RAMONA, CA
- Very Easy
- Less than 15 mins
Purchased a replacement filter and installed it.
Was this helpful?
Thank you for voting!