KEBS247 KitchenAid Wall Oven - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Had to replace oven glass door that was shattered
-
Romaine from Costa Mesa, CA
- Really Easy
- 15 - 30 mins
-
Screw drivers
First of all I would like to say how prompt the delivery of my oven glass was. I ordered it Thurs & it came on Sat ~ 2 days thats amazing! Ordering my glass was easy & the representitive that helped me was very nice & the price was great! My husband repaired it in about 20 minutes - very easy to istall the glass & very cost effective repa
... Read more
iring it ourselves rather than having a repair man come out! Thanks Part Select I will recommend you to all out fam & friends most definetly!
Read less
Was this helpful?
Thank you for voting!
Upper double oven would not heat following a power failure during the clean cycle
-
Layla from Carmel, IN
- Easy
- 15 - 30 mins
-
Screw drivers
I turned off the power from the circuit breaker. I then removed the doors and the trim package from around the oven. I slid out the oven and had my husband help me lower it to the floor. I removed the back covering and then removed the wires connected to the old thermostat. I unscrewed the old thermostat and replaced it with the new ther
... Read more
mostat. Did everything in reverse and it seems to be working very well. It took about 30 minutes total. Some sites suggested that a fuse needed to be adjusted/replaced. In this kitchen-aid double oven and I'm assuming whirlpools as well, the thermostat/fuse is one piece located on the back of the unit. It was very simple. The piece cost $47. Such a great investment of time and money. I had the piece in 2 days, without paying extra postage.
Read less
Was this helpful?
Thank you for voting!
Not Heating
-
Gayle from Shelby, AL
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Removed wall oven from wall. Removed back cover. Unscrewed thermastat and removed old thermastat. Screwed in new thermastat and put back together.
Was this helpful?
Thank you for voting!
Cracked oven door inner glass
-
michael from corona del mar, CA
- Easy
- 15 - 30 mins
-
Screw drivers
Not difficult, but there are several layers of glass, metal, and insulation inside this door. Keep track of where the screws go and have room to lay out all the layers. You'll reach the cracked inner glass last.
Was this helpful?
Thank you for voting!
Inner oven door glass cracked during operation
-
Alexander M from McMurray, PA
- Easy
- 15 - 30 mins
-
Screw drivers
Remove the door from the oven by rotating the two hinge locks. Place on soft working surface with inside door facing up. Remove screws from side , bottom and top of door. Place screws in groups as they were removed, the heads are different. Do not mix screws. Rotate door so outer Glass front is now on top. Slowly remove inner panel by sli
... Read more
ding the outer glass panel towards bottom of door. Carefully remove inner portion of door with the two inner glass panels. Remove inner broken glass from innermost panel. replace with new glass and reverse operations to reassemble door. Make sure the white filler maaterial is back from edge of inner door glass or you will be able to see it from the front after reassembly.When all assembled, slide door back onto hinges relock hinges and you are ready to go.
Read less
Was this helpful?
Thank you for voting!
inner glass on oven door
-
RONALD from CHICAGO, IL
- Really Easy
- 15 - 30 mins
-
Screw drivers
I followed the instructions given and it was very easy
Was this helpful?
Thank you for voting!
oven door would not close
-
Edward from San Antonio, TX
- Easy
- 15 - 30 mins
-
Screw drivers
The repair went well & the part came in on time for thanksgiving thank you
Was this helpful?
Thank you for voting!
lower oven door not fully closing
-
George from Eugene, OR
- A Bit Difficult
- 1- 2 hours
-
Screw drivers
Did not want to remove the pin from the new hinges, so found a proper rod and cut off two half inch pins to use in removing the door. followed the manual instructions. Took all of the screws out but did not notice that the four inside face screws were machine screws while all others were sheet metal screws. Had a little difficulty in get
... Read more
ting the four machine screws to engage the bottom holes of the new hinges. Reinstalled the door and all works fine. It is too bad that we could not purchase just a new hinge spring instead of the entire unit. It is kind of a waste. I suspect that self cleaning ovens generate a very high heat which eventually weakens the hinge. The upper oven will likely fail in the future, but at least I know how to repair it.
Read less
Was this helpful?
Thank you for voting!