My Orders
KEBS247 KitchenAid Wall Oven - Overview
Models starting with KEBS247
Click on the best match to narrow your results.
- KEBS247DBL1 KitchenAid Wall Oven
- KEBS247DBL10 KitchenAid Wall Oven
- KEBS247DBL11 KitchenAid Wall Oven
- KEBS247DBL12 KitchenAid Wall Oven
- KEBS247DBL2 KitchenAid Wall Oven
- KEBS247DBL4 KitchenAid Wall Oven
- KEBS247DBL6 KitchenAid Wall Oven
- KEBS247DBL7 KitchenAid Wall Oven
- KEBS247DBL8 KitchenAid Wall Oven
- KEBS247DBL9 KitchenAid Wall Oven
- KEBS247DWH1 KitchenAid Wall Oven
- KEBS247DWH10 KitchenAid Wall Oven
- KEBS247DWH11 KitchenAid Wall Oven
- KEBS247DWH12 KitchenAid Wall Oven
- KEBS247DWH2 KitchenAid Wall Oven
- KEBS247DWH4 KitchenAid Wall Oven
- KEBS247DWH6 KitchenAid Wall Oven
- KEBS247DWH7 KitchenAid Wall Oven
- KEBS247DWH8 KitchenAid Wall Oven
- KEBS247DWH9 KitchenAid Wall Oven
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$21.45
In Stock
Screw
Part #W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
$49.50
In Stock
Oven Halogen Bulb
Part #WP4452164
This halogen light bulb is a type of lamp that uses a halogen gas mixture for better lighting quality and longevity. It is an authentic OEM replacement bulb designed for use in ovens and ranges. It is used to illuminate the oven cavity. Over time, the filament inside the bulb can wear out and break, causing the lamp to fail. A faulty sock...Read moreet connection can also cause the bulb to lose electrical contact and stop working. If your oven light is faulty, you will have difficulty seeing and monitoring the food throughout the cooking process. Locate the bulb housing inside the oven cavity and carefully remove the bulb from the socket. Place your new bulb into the socket and ensure the bulb housing is secure. Note that each light bulb is sold individually.
Read less
$7.47
In Stock
$72.00
In Stock
Range Temperature Sensor
Part #WPW10131825
The temperature sensor measures the temperature inside the oven. If your oven is too hot, not heating evenly, is not heating enough when baking, or simply will not start, you could have a faulty temperature sensor. A faulty temperature sensor can be a fire risk. If your sensor is not working properly, you should look to replace it straigh...Read moret away. A failed oven sensor is most often responsible for F3 or F4 error messages on electronically-controlled ovens. Make sure you disconnect the power to your range before you start your repair.
Read less
No Longer Available
Touch-Up Paint - White
Part #72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
Read less
$59.47
In Stock
Range High-Limit Thermostat
Part #WP9759242
This thermostat is also known as a thermal cut-off fuse and is used in conjunction with your range. This part establishes and maintains the internal temperature of the oven cavity. When the temperature of your range gets too hot it will trip the high-limit thermostat safety, this will cut the power to the oven so that it does not continue...Read more to overheat. For this installation, you will need a Phillips screwdriver and a pair of needle-nose pliers. If your oven does not heat after a self-cleaning cycle you may need to replace the high-limit thermostat.
Read less
$49.50
In Stock
2 Piece Broiler Pan
Part #4396923
This broiler pan and roasting rack set is designed to help reduce mess while cooking by allowing grease to drain away from food. Its durable porcelain-coated construction stands up to high temperatures and makes cleanup simple. With approximate dimensions of 16 3/4 inches long, 12 3/4 inches wide, and 1 3/4 inches high, it offers a convenient size for everyday broiling and roasting.
$82.38
In Stock
$76.17
In Stock
$7.47
In Stock
No Longer Available
Spray Paint - 12 oz. - White
Part #350930
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a pr...Read moreotective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.
Read less
$7.47
In Stock
Common Symptoms of models starting with KEBS247
How this model fails, and the parts that fix it.
Little to no heat when baking
Fixed by
these parts
these parts
Show All
Oven is too hot
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Door won’t open after self cleaning cycle
Fixed by
these parts
these parts
Show All
Oven not heating evenly
Fixed by
these parts
these parts
Show All
Will not program
Fixed by
these parts
these parts
Show All
Little to no heat when broiling
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
After using the "self-clean" option, the panel blew out and the door remained locked. We knew we burnt fuses but didn't know which ones. We had a technician come out and tell us which ones. ($70.00) He quoted us a price of $495.00 for parts and labor. We did the repair ourselves and cost us $157
42 of 54 people
found this instruction helpful.
The hardest part was getting the oven out. The double oven is pretty heavy.
The screws were on the sides under a removable strip. Have a table about the same height as the base of the oven. It was easy to slide it straight over to the table.
The schematics are on top of the oven. Although you probably won't ... Read more need them for the parts we replaced. When you have the oven out and the back panel removed, it is easy to identify the exact parts you are replacing. The part numbers were the same on the fuses. The thermostat was a simple pull apart. Then undo the 2 screws inside the oven. The heat sensor required some figuring. There is a pin that holds it in place in a plastic casing. We used a small flat head screw driver to push the pin flat to loosen it from the casing. This part was behind the digital panel and the only one that didn't require the oven coming out.
We would easily do this project again and glad we did. We saved $340.00 by doing it ourselves. I am glad I found PartSelect.com
Make sure you turn off the breaker to the appliance first. You don't want any electrical surprises. The hospital bill would be more expensive than the repairman !!
The screws were on the sides under a removable strip. Have a table about the same height as the base of the oven. It was easy to slide it straight over to the table.
The schematics are on top of the oven. Although you probably won't ... Read more need them for the parts we replaced. When you have the oven out and the back panel removed, it is easy to identify the exact parts you are replacing. The part numbers were the same on the fuses. The thermostat was a simple pull apart. Then undo the 2 screws inside the oven. The heat sensor required some figuring. There is a pin that holds it in place in a plastic casing. We used a small flat head screw driver to push the pin flat to loosen it from the casing. This part was behind the digital panel and the only one that didn't require the oven coming out.
We would easily do this project again and glad we did. We saved $340.00 by doing it ourselves. I am glad I found PartSelect.com
Make sure you turn off the breaker to the appliance first. You don't want any electrical surprises. The hospital bill would be more expensive than the repairman !!
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!