KDTM7 Dishwasher - Parts

This part is also known as a float switch. This float switch, when activated, stops the flow of water into the dishwasher.

The upper spray arm rotates and sprays water to clean the dishes inside the dishwasher tub. If your dishes are not being cleaned properly, you should check if there is an issue with the spray arm. To check your spray arm, make sure the spray arms can move evenly and freely on their bearing rings and mounting brackets. Remove your spray ar...Read morem and check to ensure they are straight and undamaged. This spray arm is made of high-quality plastic and is just over 5 inches long.

This fill hose is a genuine OEM replacement part for your dishwasher. The hose is made of black plastic, and is accordion-style, for ease of movement within your dishwasher. To replace the fill hose, you will need a 1/4 inch nut driver, Channellock pliers, and a Phillips screwdriver. Replacing this part will require some disassembly, such...Read more as removing the water inlet valve from the fill hose, and the clamps which secure the hose in place. Reuse your existing clamps when securing your new fill hose in place.

This is the right dishrack adjuster housing for various models of dishwashers. This housing is made of gray plastic and connects to the dishrack in your dishwasher to raise, lower, and adjust it. If this housing is damaged or broken, your dishrack will have difficulty adjusting and remaining supported. Replacing this adjuster housing is s...Read moreimple and only requires a flat tool, such as a flathead screwdriver. This OEM adjuster housing is sold individually, so if you require the left housing as well as the right, consider that before ordering.

Sold individually.

This dishwasher toe kick access panel, also known as a kick plate, is designed to cover the gap beneath the dishwasher for a clean, finished look while protecting internal components from dirt, moisture, and damage. Made from durable, moisture-resistant materials, it helps maintain the appliance’s exterior appearance and alignment by repl...Read moreacing dented, cracked, or missing panels. Engineered for an exact fit, this part ensures seamless integration and long-lasting protection for the dishwasher’s base.

Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a pr...Read moreotective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.

Dishrack ONLY. Wheels not included.

New Black Single Metal Access Panel Replacement Kit. Replaces old two part toe kick plates. Reuse insulation off old panel or see Recommended Parts.

This screw is sold individually.

This part has a swivel gooseneck fitting and that allows it to be installed closer to the wall. This part has a 3/4" hose thread on one side and a 3/8" copper tubing on the other side.

The plastic button covers the sharp ends of screws along the edge of the dishwasher tub. Sold individually.