KBFS25EWWH9 KitchenAid Refrigerator - Parts

This water filter (Whirlpool EveryDrop Refrigerator Water Filter, Single Turn Filter) purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the owner manual. Replacing this water filter may fix a noisy or leaking fr...Read moreidge, a fridge that is not dispensing water (or reduced flow rate), and an ice maker that is not making ice at all, or not making enough ice. This filter is white, sold individually and measures 8 inches by 3 inches in diameter. This water filter has been updated by the manufacturer. It may appear different but will still function the same. It is sold individually.

This manufacturer-approved Refrigerator Pantry End Cap Kit, also known as the Refrigerator Drawer Support, is a kit containing all parts of the Pantry End Cap. It snaps into place on the appliance’s pantry drawer to help contain the items inside and to keep your refrigerator door from sliding all the way out. It is rated as "medium" diff...Read moreiculty to install, is constructed of plastic and comes in white. If broken or missing, the pantry drawer will not stay in place and the part should be replaced. Refer to your user manual and model number to ensure this is the correct part for you. This kit includes both the right and left side end caps, as well as the pins that will hold them in place. To replace an end cap, remove the three screws holding it in place. Then, remove the pin and end cap, replacing the old end cap with the new end cap. In the past, the left and right end caps were sold separately, but the part has been updated and now includes both sides. The part is sold as a kit, and unfortunately, as such none of the parts are available individually.

This OEM Center Rail is a white plastic part which supports the crisper frame, which holds the crisper. Fifteen inches long and white in colour, if broken, the support may no longer hold properly. Refer to your model number and user manual to see if this part will be right for your appliance. This part is a very easy repair which only ta...Read morekes a few minutes and does not require any tools. Just slide the crisper drawers out, lift out the glass shelf, slide the new rale into place and replace the glass shelf and crisper drawers. This part is sold individually and not as part of a set.

If your refrigerator’s interior light is not working, the door switch may be the cause. It turns the light off when the door closes. This is an OEM part. Confirm compatibility using your refrigerator’s model number.

The refrigerator light and fan circuit uses this three-terminal rocker arm switch. It is an OEM replacement part. Disconnect power before working on this electrical part.

Keep ice ready for everyday use with this refrigerator ice maker assembly. It receives water, forms cubes in the chilled mold, and automatically releases them into the storage bucket. A worn or damaged assembly may stop producing ice, leak near the mold, or make unusual noises during the release cycle. Replacing a faulty unit helps restor...Read moree automatic ice production. Unplug the refrigerator and shut off the water supply before installation. Position the fill cup beneath the water feed tube, secure the electrical connection, and check for leaks after restoring water. This is an OEM part sourced directly from the manufacturer.

This refrigerator pantry drawer lid covers the front of the pantry compartment to keep stored items enclosed and easy to see. Its white plastic frame surrounds a clear viewing window, allowing you to check contents without lifting the lid. Cracks, broken hinge points, or damaged edges may prevent the cover from opening smoothly or resting...Read more properly in place. Replacing a damaged lid helps restore convenient access and a complete drawer cover. Handle the mounting tabs gently during installation to avoid cracking the plastic. This is an OEM part sourced directly from the manufacturer.

Carry defrost water away from the freezer with this refrigerator drain tube kit. It directs melted frost into the drain pan beneath the appliance, where the water can evaporate. The updated curved tube replaces older drain designs that can clog and cause water to back up. A blocked or damaged drain may lead to ice on the freezer floor or ...Read morewater leaking beneath the refrigerator. Installing the kit helps restore proper drainage. Unplug the refrigerator before accessing the lower rear compartment. This is an OEM part sourced directly from the manufacturer.

This mounting screw is a genuine OEM replacement part for the door handle in your refrigerator. If you are having trouble shutting the refrigerator door, or opening it, replacing this screw can help solve the issue. Replacing this part is easy and requires minimal disassembly of the refrigerator end cap handle. Your will need a screwdriver to complete this repair.

Water can still flow to the refrigerator dispenser and ice maker with the filter removed when this OEM bypass plug is attached in the water filter head. Follow the owner's manual for installation.

This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.

Maintain a tight seal around the fresh food compartment with this white refrigerator door gasket. Its flexible magnetic edge rests against the cabinet when the door closes, helping retain cold air and block warm, humid air from entering. Tears, cracks, or warped sections may cause condensation, warmer storage temperatures, or longer runni...Read moreng times. Replacing a damaged gasket helps restore proper sealing. Before installation, smooth shipping creases with warm water and clean the retaining channel, then confirm even contact around the entire door perimeter. This is an OEM part sourced directly from the manufacturer.