JVM250BVC01 General Electric Microwave - Instructions

Simple. The parts came instantly. The glass was too big so I had it cut to size. I unscrewed the fixture with a screw driver replaced the bulb and slipped the glass cover into the frame and screwed the whole assembly in.

Replaced the sockets, lens and bulbs. The first time the new bulb was touching the lens and the heat broke the lens and burnt out the bulb. The second time I adjusted the socket so that the bulb does not touch the lens.

Impressed by how quickly the parts arrived after the order was submitted. Two days.

Thank you.

Ordered new support (price was less than Postage) Ordered for Microwave, should have ordered for Convection Microwave. Filed side SS to fit part ordered, after much filing got the new part (wrong) into the side panel. Looks great, wrong color but should be OK/

Screwed in new bulb.

Took a total of 5 minutes to replace the handle including going and getting the philips head. Unscrew from inside door and replace. Piece of cake.

remove cover, unplug secondary door switch (top switch)
remove switch from holder, install new switch, plug in wires, replace cover, very easy. door switches are a common problem
with microwave ovens.

Removed Cover Plate,
Removed back cover
Bulb disintegrated removed base with pliers
Screwed in new lamp
Replaced cover
Done

took out several screws dropped down the panel under the microwave and unscrewed the bulb and put the new one in. It was a simple job.

I unscrewed the remaining stubs and replaced the handle. Unfortunately, despite care, I was unable to tighten the top screw sufficient to seat the handle securely against the door. I fear the new handle will fracture.

I asked a handyman at the local fitness center about repairing it and he refered me to your website where I found an exploaded drawing showing the parts I needed and how to get to them. It was great and very easy.

Real simple, removed two screws, lined-up new handle and installed two screws, job done.

It took about 3 minutes to install this handle. Only two screws and it was done. Thank you for having this part in stock, as the microwave is still in good shape after all this time.

1. Removed old handle (removed 2 screws).
2. Removed and discarded old handle.
3. Put new handle in place.
4. Replaced and tightened screws. Note: old screws were reused - new screws not supplied with replacement handle.
5. Done.
6. Time required: less than 5 minutes.

RJL

Just unscrewed the screw holding the lens, unscrewed the bulb and put the new bulb in. Simple

Super easy repair, getting the part was just as easy. I did a simple search with the model number and was able to verify that the part I was ordering was the correct one by using the many pictures and diagrams available.
Thank you for providing such a user friendly site as I hate sending stuff back. Although I hope my appliances last ... Read more a long time if I ever need repair parts again you can be sure that I'll use this site.