All Installation Instructions for General Electric Microwave JVM1540DM5WW

We had no ring so the turning plate tipped

Sian from Harrisonburg, VA
Really Easy
Less than 15 mins

I lifted out the glass plate, put the ring down, and put the glass plate on top of it. Voila!

Was this helpful?

Glass tray broke in microwave

Ralph from Puyallup, WA
Really Easy
Less than 15 mins

Removed tray from shipping container and installed in the microwave.

Was this helpful?

broken micro tray

william from San Marcos, CA
Really Easy
Less than 15 mins

placed plate on carousel

Was this helpful?

Oven turntable rotating intermittent

Stephen from Burnsville, MN
Really Easy
Less than 15 mins

Removed glass table. Lifted out shaft coupling. Replaced shaft coupling with new one and glass plate.

Was this helpful?

Broken microwave glass tray

Frank from Arlington, VA
Really Easy
Less than 15 mins

Placed the new tray in the microwave.

Was this helpful?

Brief fire burned the cover

Richard from Fort Myers, FL
Really Easy
Less than 15 mins
Screw drivers

Inserted a kitchen knife between the cover and the inside top of the microwave. Pry out the small plastic keeper pin located in the front of the stirrer cover and save for reinstallation. Twist the cover and gently remove. Remove the metal fan and insert it in the new cover. Reinstall the cover and twist to align the hole for the keeper p ... Read more

Read less

Was this helpful?

Microwave would act like it's working but the turn table didn't spin and the food would not heat up.

paul from strongsville, OH
Easy
15 - 30 mins
Pliers, Screw drivers

Removed the top vent cover (2 screws) and removed the control panel (1 screw). Replaced the door's top interlock switch. The switch bracket tabs broke but a good zip tie worked just as well.

Was this helpful?

JVM1540DM5WW General Electric Microwave - Instructions