JVM1540DM5WW General Electric Microwave - Parts

There are two different couplers (also known as a turntable shaft) that can be used for this tray - a male D-shaped shaft and a female D-shaped shaft. The couplers are sold separately.

Maintain a cleaner kitchen environment with this multi-layer aluminum microwave grease filter. Designed to effectively trap grease particles and reduce odors, it helps prevent buildup in the recirculation system, keeping your microwave running efficiently. Ideal for replacing worn or clogged filters, this part supports a fresher cooking experience and is easy to install.

The stirrer fan cover in your microwave can be found on the roof of the microwave. It protects the fan from damage and debris. This fan cover is made of white plastic and is approximately 7.5 inches in diameter. Occasionally, the stirrer fan cover can melt, and become damaged. If you smell burning from your microwave or notice damage, the...Read more fan cover should be replaced. The stirrer fan cover is sold individually, and is an OEM part directly from the manufacturer.

Sold individually. Appliance may take 2.

The rotating ring in your microwave rests under the microwave plate, and allows it to rotate when the microwave is running. It is a round plastic ring with 3 wheels spaced out around the perimeter. If your microwave plate or tray is not turning, you could have a broken or damaged rotating ring. This plastic ring is gray in color and is ap...Read moreproximately 10 inches in diameter. The 3 wheels are made of white plastic. This part is sold individually.

This is the replacement damper bracket for your microwave. It is made of plastic and is approximately 11 inches wide and 3 inches long. The damper bracket attaches to the outer cabinet and directs airflow through the vent duct. The main reason you would replace the damper bracket is if it is damaged and will not hold the damper in place p...Read moreroperly. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This mounting plate, also known as a bracket, is crucial for keeping your microwave mounted to the wall, when placed above the stove. This OEM part is sold separately from the screws that are needed to hold it in place. You will need a screwdriver in order to secure the mounting bracket into place. Part has been substituted. Part is no lo...Read morenger a U-shaped bracket, it is now a flat mounting plate and will function the same.

This part is the replacement high-voltage diode for your microwave. It is approximately 3 inches long and is sold individually. The high voltage diode is an electrical current control device inside your microwave. Be sure to disconnect power to the microwave, and use extreme caution when completing this repair, as microwaves can still ret...Read moreain an electrical charge even when unplugged. This part is an authentic OEM part sourced directly from the manufacturer.

This is a replacement primary interlock door switch for your microwave. When the door is latched properly, the switch is actuated, and the microwave will operate. If your microwave will not start when the door is latched, you could have a faulty switch. The switch is black in color and has two metal terminals. It is approximately 1 inch l...Read moreong and ½ an inch wide. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Also known as Coupler.

Handle only. This door handle is for microwaves. Because the inner door panel covers the screws that attach the door handle to the door, the door panels must be separated to access the screws and replace the handle. A service technician should install this door part because the door contains shielding components. The technician must...Read more correctly test the microwave for leaks in the microwave shield before you can safely use the microwave.