EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JMS08BD1AD General Electric Range - Instructions

All Instructions for the JMS08BD1AD
1 - 15 of 166

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
I needed new surface elements & burner bowls
493 of 503 people found this instruction helpful.
  • John from San Ramon, CA
  • Really Easy
  • Less than 15 mins
This was about the simplest fix I've ever done. Just pulled off the old surface elements & burner bowls, wiped down the range top, and put in the new parts. Perfect fit. No problems at all. $$ well spent. ParsSelect shipped quickly, and they arrived well packaged. A+ experience all around. Thanks PartSelect. JA, San Ramon, CA
Was this helpful?
Thank you for voting!
Burner bowls needed replacement
488 of 507 people found this instruction helpful.
  • Tom from North Prairie, WI
  • Really Easy
  • Less than 15 mins
Very easy repair, Pulled burner coil out, removed old burner bowl. Put in new burner bowl, plugged burner coil back in... easy as 1,2,3
Was this helpful?
Thank you for voting!
Burner Bowl Needed Replaced
524 of 693 people found this instruction helpful.
  • Stephen from Knoxville, TN
  • Really Easy
  • Less than 15 mins
Removed burner element and put in bowl
Was this helpful?
Thank you for voting!
Burned out block
303 of 528 people found this instruction helpful.
  • Americus from Pittsburgh, PA
  • Easy
  • 15 - 30 mins
  • Nutdriver
Watched a repairman do it the last time for $200.00. This time I unplugged the stove, unscrewed four screw nuts holding the upper rear cover, unplugged old wires, reconnected new ones, fed them thru to the front, attached them to the new block, screwed the block into place, replaced back cover, stuck the element into place, made my little brother plug it back in and turn it on first. It worked. Cost me $20.00 to do what the repairman did the last time. I also replaced the reflector pans. No-brainer.
Was this helpful?
Thank you for voting!
The stove's bowl were burned and a mess.
219 of 438 people found this instruction helpful.
  • Martin from Tewksbury, MA
  • Really Easy
  • Less than 15 mins
Pulled out burner and put new bowls in. Looks like a new stove!
Was this helpful?
Thank you for voting!
Replaced old drip bowls
217 of 438 people found this instruction helpful.
  • John from Eowell, OH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Took 5 minutes to replace the 4 bowls. Ordered the bowls one day & they arrived the next day All went perfect.
Was this helpful?
Thank you for voting!
The broiler element caught fire and burned out while I was broiling a steak.
67 of 75 people found this instruction helpful.
  • Dianne from Rockville, MD
  • Easy
  • Less than 15 mins
  • Nutdriver
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches, but I had not turned off the power.
So, I shorted out one of the wires. Then I turned off the power but was afraid to go any farther.
An appliance repairman was at my house that day fixing my dryer seal. He was able to pu ll the wires through the insulation successfully and install the broiler element. He did not charge me any extra for this little extra job. But I learned my lesson. Cut the power before you begin! He told me that I could have wound up with a much bigger repair if the short had been in the wire that is connected to the control panel of the oven. I was very lucky!
Was this helpful?
Thank you for voting!
oven door seal was old and falling apart
56 of 67 people found this instruction helpful.
  • eric from washington, DC
  • Really Easy
  • Less than 15 mins
  • Screw drivers
at first thought the seal would just slide out and the same for the replacement. when I realized that this was not the case and began to wonder what....? I saw the screws at top and bottom, took them off and voila the inner shell moved forward enough to take out the old, slide in the new, push in, replace the screws and back to a happy w ife with an oven that can bake correctly again
Was this helpful?
Thank you for voting!
burner was shorting out
47 of 49 people found this instruction helpful.
  • douglas from louisville, KY
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
unplugged unit pulled it away from wall took off the backplates traced wire to plug replaced with part ordered very smooth operation. the most impressive thing to me was i ordered part on computer and it was at my door in 30 hours awesome.
Was this helpful?
Thank you for voting!
Top broiler element went out
39 of 43 people found this instruction helpful.
  • Kim from Garland, TX
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
FIRST MAKE SURE THE OVEN IS OFF!!!! I chose to shut it off at the breaker panel. Remove the two screws that attaches the broiler element to the oven. Gently pull it out. Unplug the two cable wires that are attached. Replace it and install the same way.
Was this helpful?
Thank you for voting!
bottom of heating element corroded
66 of 129 people found this instruction helpful.
  • B. from Seattle, WA
  • Really Easy
  • Less than 15 mins
PartsSelect is the BEST!! This is the second time I've had to use them on home appliances. Their web site was easy to use, shipping was fast, prices competitive and instructions very easy to follow. I would not hesitate to use them again. Very happy with service from the get-go.
Was this helpful?
Thank you for voting!
Replacement of Coils
35 of 42 people found this instruction helpful.
  • Joseph from South Plainfield, NJ
  • Really Easy
  • Less than 15 mins
Removed by slightly wiggling out of the coupling. No tools needed, seriously, (and I'm a contractor). Basically, pull out and snap back in.
Was this helpful?
Thank you for voting!
Replacement of heating element
16 of 16 people found this instruction helpful.
  • Kimberly from El Cerrito, CA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
If I'd had the Nut driver, it would have taken 15 -20 minutes or less. Went to Ace Hardware, bought the nut driver for $4.99.

Turn off the power at the box! Turn off the oven as well. Four screws total. Two to hold it in place and two that connect the element to the source.

First I removed the two screws that h old the element in place. I pulled the element out about 2 inches. Two more screws connect the element wires. I disconnected the element, threw it away, then connected the new element. I put the element in place, then replaced the screws that connect the power. Finally, I replaced the screws that hold the element in place.

Kimberly, El Cerrito, California
Was this helpful?
Thank you for voting!
The electric burner on the stove top would no longer heat up, when we removed it we noticed that the element was completely burned. I mean fryed!
14 of 15 people found this instruction helpful.
  • Monica from Point Blank, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First, I got my husband and let him know that the part was in (really easy), then I sat back and watched as he pulled the oven from the wall, unplugged it and lifted the stove top (so far, I haven't broken a sweat)! I then peeped up under the top as he removed a scew from the element and then several screws from the back panel, trace the wire to the needed element, and reconnect the new element (haven't broken a nail yet)! He then secured the element back on its mount, let down the top and plugged the oven back in, checked for accuracy...mission accomplished! This was the easiest repair I've ever done!
Was this helpful?
Thank you for voting!
Broiler element would not heat; bake element did heat
12 of 14 people found this instruction helpful.
  • Brad from San Carlos, CA
  • Easy
  • 15 - 30 mins
  • Socket set
Removed the oven racks, removed screws holding element hanging support from roof of oven, removed screws holding plate of element to rear of oven. CAREFULLY worked element loose from back of oven and gently alternated pulling each side of element (near the base) until connecting wires came free of insulating batting. Pull too hard and t he connecting wires can break loose and disappear behind the batting. Once freed, disconnected both wires with socket (use pliers for extra grip on flat part of connectors, if necessary), removed element, braced new element on bottom of oven, aligning connectors to now-free wires. Re-attached with the new screws that came with the element (attachment points on element are threaded; do not reuse old screws as the threads may not match), gently re-inserted element into insulating batting at rear of oven, reattached hanging support, then replaced element plate screws.

Can be difficult to work in small, deep ovens....many oven doors can be removed. If so, remove oven door and use a chair as a support...lie on your back on the chair and hang your head and arms in the oven.
Was this helpful?
Thank you for voting!
All Instructions for the JMS08BD1AD
1 - 15 of 166