EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JKP36005 General Electric Range - Instructions

All Instructions for the JKP36005
121 - 135 of 346

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven was not heating on bake
0 of 1 people found this instruction helpful.
  • Robert from Kingwood, TX
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Part was a breeze to install. I turned the power off to the oven at the breaker. I then unscrewed the bolts holding the old element in and disconnected the wires. I attached the wires to the new element and bolted it back onto the oven. I turned the breaker back on an tested the new bake element. Worked great! Now it heats up like it shou ld. The whole process was very easy.
Was this helpful?
Thank you for voting!
Bake element burned out
0 of 1 people found this instruction helpful.
  • Kim from Meredith, NH
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
The part was ordered on a Friday afternoon. It arrived the next morning! Threw the breaker, removed the racks, removed the old element and put in the new one. Done.
Was this helpful?
Thank you for voting!
oven bake element broke
0 of 1 people found this instruction helpful.
  • RONALD from SMITHTOWN, NY
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Bottom bake element is fastened to back wall by 2 screws remove those first.
Slowly pull out old bake element notice 2 wires are fasten to old bake element by 2 philips head screws. Remove screws from wires fastened to old bake element
Discard old bake element.

Reverse the order for assembly.
Replacement part i s the exact fit and entire replacement took 15 minutes.

EASY REPLACEMENT
Was this helpful?
Thank you for voting!
Bottom Element was defective
0 of 1 people found this instruction helpful.
  • Pete from Fresno, CA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Socket set
Unscrewed the two screws holding the element to the back oven wall, then I was able to pull the element out. I then unsrewed the two screws holding the two wires to the element. Installation was the reverse. Pretty simple job.
Was this helpful?
Thank you for voting!
original heating element broke in 2
0 of 1 people found this instruction helpful.
  • Bill from Westfield, NJ
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Unscrewed the broken element from the back of the inside of the oven, then unscrewed the connected wires from the element and did the reverse with the new element. Viola.

Before touching anything, however, I made sure the oven was in the off position and also went to the house circuit breaker box and flipped OFF the appropriat e circuit breaker(s). There were two - one for the element and another for the rest of the controls.

When everything was in place, I turned the power back on and turned on the oven and was cooking again. We had Prime Rib for Easter.
Was this helpful?
Thank you for voting!
Broiler Element burned out.
0 of 1 people found this instruction helpful.
  • George from Lecanto,, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
The replacement was straightforward, six screws. Instructions were provided with the part along with the necessary screws to fit the new element terminals.
Open the breaker, verify power is off, remove the old burner. Install the new burner and mounting bracket. Restore power and test. In and out in less then thirty minutes.
Was this helpful?
Thank you for voting!
The baking element was old & sparks were coming from it..
0 of 1 people found this instruction helpful.
  • Kelley from Cleveland, OH
  • Easy
  • 15 - 30 mins
  • Screw drivers
I (a woman) unplugged the stove, took out the screws, and unhooked the baking element. I then replaced the old screws with the newer ones, and made sure everything was nice and tight. I was a little nervous at first but everything turned out okay. I plugged the stove back up & the baking element was a bright orange and it works better tha n ever. The whole process took about 15-20 minutes.
Was this helpful?
Thank you for voting!
Baking Element burned out
0 of 1 people found this instruction helpful.
  • Peggy from Angola, IN
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Took out old element with screw driver and replaced new element with screw driver, very simple.
We were so happy with the customer service, had the new element the very next morning. Thank you.
Was this helpful?
Thank you for voting!
lower oven heating element was broken apart
0 of 1 people found this instruction helpful.
  • Jack from Sheboygan, WI
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
I read your website repair testimonials by previous customers and used that advise to do the job. I liked the suggestion to use something to attach to the unattached wires so they don't slip back into the unit. I used two clothespins. I had one stubborn electrical connection to disconnect so it took a little longer -about 30 minutes. Bu t it was a simple job to do and my oven works fine again. The item was delivered timely from the order date and packaged well. Thank-you!
Was this helpful?
Thank you for voting!
Element bad
0 of 1 people found this instruction helpful.
  • Laurence from Durham, NC
  • A Bit Difficult
  • 15 - 30 mins
  • Screw drivers
New element arrived in a couple of days! We turned off breaker to oven, removed the old one which only involved two screws. Then we had to connect new one and re-attach metal square, only tricky part was getting the metal square positioned correctly but that was really not hard, just made sure insulation was covered and plate went back in same position. If we had called a eepair company it would have taken a week or more and probably been expensive!
Was this helpful?
Thank you for voting!
broiler element wa burned out
0 of 1 people found this instruction helpful.
  • joan from coram, NY
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
I shut down the electric to the oven at the circuit breaker. Then i loosened the mounting screws and pulled the element from the back wall of oven. Then i disconnected the two leads to the element with a phillips screwdriver and removed element. Installation was done in reverse order.
Was this helpful?
Thank you for voting!
Bake Element went bad
0 of 1 people found this instruction helpful.
  • Edward from Dallas, TX
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
First I Shut off the breaker from the fuse box
Tried to turn oven on to make sure I tripped the correct breaker
Removed element from back wall of oven by removing 2 screws using a socket set
Gently pull out element a few inches and then unscrew 2 wires from the bake element using a phillips screwdriver
Replace old elem ent with the new one
Screw wires to element
Attach new element to back wall of oven making sure the rectagular hole is totally covered and the element is flush against the back wall
Replace screws attaching baking element to back of oven wall
Turn on breakers and test the oven
Was this helpful?
Thank you for voting!
baking element burned out
0 of 1 people found this instruction helpful.
  • Vicki from Odessa, TX
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
replaced with a new part . Thanks for all your assistance in getting the correct part
Was this helpful?
Thank you for voting!
lower(bake)element burnt out
0 of 1 people found this instruction helpful.
  • Jerome from Towson, MD
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
remove two screws from back of oven holding element to back of oven. Pull out gently, remove two screws holding wire connections(power wires) throw away old element. Place new element into oven. Reconnect element to power wires using screws. Push element back into back of oven. Replace screws holding element in place. Turn oven on to chec k for proper connections.
Was this helpful?
Thank you for voting!
Bake element burned out
0 of 1 people found this instruction helpful.
  • RM from Woodinville, WA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I got the help for the install from the help desk. It went EXACTLY as described, I'm so impressed. So got the best price and the best help and we're fixed and I'm baking again. Awesome
Was this helpful?
Thank you for voting!
All Instructions for the JKP36005
121 - 135 of 346