JKC26404 General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bake element burned out.
0 of 1 people
found this instruction helpful.
-
Halimah from Charlotte, NC
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
My son used a screw driver and needle nose pliers to remove the old element. He then slide the new element on, put the screws in and he was done.
Was this helpful?
Thank you for voting!
burnt out bake element
0 of 1 people
found this instruction helpful.
-
Peter from Las Vegas, NV
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
This was a simple repair. Be sure to turn breaker to stove off before you start. Then remove two small screws holding element to back of stove, pull out element and disconnect two wires and remove. Reverse the steps for installation.Very simple
Was this helpful?
Thank you for voting!
Replace the large heating element.
0 of 1 people
found this instruction helpful.
-
Stephan from Gladstone, MO
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
It would have gone with ease but the screws holding the element to the conductors were not original. Once those were removed, we were able to use the screws included and were done in 5 minutes.
Was this helpful?
Thank you for voting!
Heating element in oven gave up on Monday before Thanksgiving.
0 of 1 people
found this instruction helpful.
-
suzanne from crofton, MD
- Really Easy
- Less than 15 mins
-
Nutdriver, Pliers
Totally pleased! I ordered the part Monday evening, and it was delivered Wednesday morning. Awesome! Was able to change the part in about 15 minutes. Thanksgiving was a success! Part Select saved my Thanksgiving! Highly recommend :) Thank you!
Was this helpful?
Thank you for voting!
Broken Bake Element
0 of 1 people
found this instruction helpful.
-
ANDREW from CHICAGO, IL
- Really Easy
- Less than 15 mins
-
Wrench (Adjustable)
Removed bolts from fixing plate, pulled out existing element, unscrewed wire connectors and installed new element in reverse order of removal. This is an old stove from the 60's or 70's so I was glad to get a replacement part and fit it myself so easily.
Was this helpful?
Thank you for voting!
Original bake element burned out
0 of 1 people
found this instruction helpful.
-
William from Hamden, CT
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Followed directions left by a previous user on PartSelect: 1. open oven door and lifted it off hinges; 2. Unscrewed mounting element mounting plate from rear of oven (may need nutdriver, allen wrench or screwdriver) 3. Unscrewed electrical leads from element; replaced with new element and reversed the steps.
Was this helpful?
Thank you for voting!
Burned out oven element
0 of 1 people
found this instruction helpful.
-
Fernando from Auburn, GA
- Really Easy
- Less than 15 mins
-
Nutdriver
Remove two screws that secure the plate to the oven wall. Pull element out about 6 inches, then remove two screws that attach the element to power lines. Reverse for installation. Very easy.
Was this helpful?
Thank you for voting!
Bottom Bake Element burned out
0 of 1 people
found this instruction helpful.
-
Marcus from Spring Lake, MI
- Really Easy
- Less than 15 mins
-
Nutdriver
Replaced old bake element with new one. 4 small screws/nuts. From order to fix was 3 days. My wife was impressed.
Was this helpful?
Thank you for voting!
Baking element in oven broken
0 of 1 people
found this instruction helpful.
-
Nicholas from Davidsonville, MD
- Really Easy
- Less than 15 mins
-
Screw drivers, Socket set
Went on line to find the part number and ordered the part. It came in the mail two days later and I installed in about five minutes.
Was this helpful?
Thank you for voting!
Bake element not working
0 of 1 people
found this instruction helpful.
-
Sean from Longmont, CO
- Really Easy
- Less than 15 mins
-
Wrench (Adjustable)
Very easy to replace. Oven works like new again. If you have even the most basic visual and mechanical ability, you will be fine to do this on your own. Total repair time for me was less than 5 minutes. The part was an exact fit!
Was this helpful?
Thank you for voting!
bake element burned out
0 of 1 people
found this instruction helpful.
-
Laurie from Jonesborough, TN
- Really Easy
- Less than 15 mins
-
Pliers, Wrench (Adjustable)
Took the old one out, measured it, ordered the appropriate size, intalled the new one.
Was this helpful?
Thank you for voting!
oven element cracked apart, oven would not heat
0 of 1 people
found this instruction helpful.
-
Teresa from Grand Foks, ND
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
1-Shut off the breaker
2-Pulled off the oven door for easier access
3-Unscrewed the old element plate
4-Unscrewed the red and black wires from the old element
5-Screwed on the new element to the wires
6-Replaced the screws on the new element plate
7-Turned the power back on
2-Pulled off the oven door for easier access
3-Unscrewed the old element plate
4-Unscrewed the red and black wires from the old element
5-Screwed on the new element to the wires
6-Replaced the screws on the new element plate
7-Turned the power back on
Was this helpful?
Thank you for voting!
Baking element burned out.
0 of 1 people
found this instruction helpful.
-
Philip from Boca Raton, FL
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
I am a CPA and not real handy at all. But I was able to remove the old element and install the new element in less then 15 minutes. It burned out on Saturday, I ordered new one FED-ex to speed up- received new one, on Tuesday. Very quick, and this was last week, the week prior to Thanksgiving- so my wife really needed our oven. Perfect fi
... Read more
t. And I am not related to this company in any way, nor was I paid anything to say this, just happy this worked- or we'd be spending a lot more money.
Read less
Was this helpful?
Thank you for voting!
Bottom oven burner burned out (clear separation in element)
0 of 1 people
found this instruction helpful.
-
Paul from Oldsmar, FL
- Easy
- Less than 15 mins
-
Screw drivers
Removed 2 screws that hold the element in place. I then pulled the element out 3-4 inches and noticed 3 wires attached. (had expected 2). Disconeccted the 3 wires and renoved old element.. Reversed process with new element, and reattached wires as I found them. Inserted element and inserted holding screws for new element. Ran through sel
... Read more
f-cleaning cycle. Works great. A written warning about the wires in the box would have been comforting.
Read less
Was this helpful?
Thank you for voting!
Heating element burned out
0 of 1 people
found this instruction helpful.
-
Melvin from Houghton, MI
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Repair was super easy - read the other stories posted. They give more than adequate instruction.
Amazingly helpful website. Found the part, instructions to install, and able to order in less than 20 minutes!
Amazingly helpful website. Found the part, instructions to install, and able to order in less than 20 minutes!
Was this helpful?
Thank you for voting!