- Home
- JGP975BEKB
- Instructions
JGP975BEKB General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Grate Foot Have 8 For My Stove And One Breaks Every Now And Then
-
Lee from Kenner, LA
- Really Easy
- Less than 15 mins
This was and always will be an easy fix, all I have to do is get my ice pick and pick the broken rubber part stuck in the hole if it does not break clean and fall out. Not much more I can say about this simple problem.
Was this helpful?
Thank you for voting!
Large burner wasn't lighting very quickly
-
Jesse from Nashville, TN
- Easy
- 30 - 60 mins
Removed grill grates, gas distributors, etc. (just lift off). Used star screwdriver to remove screws (3 per burner for SML, 2 for power burner). Lift off stainless cover, which also lifts off the white sparkers I was replacing. Pull them off the wires (didn't need pliers, others said they did). Replace (make sure it is all the way on) and
... Read more
reverse your steps. White sparkers electrodes seemed loose when I put them back on, but tightened up when I fully secured the top back on. Make sure the wires aren't pinched underneath when you put the top back on. Recommended: If you've got one that isn't working, go ahead and replace all 3 (power burner is different) because the part is so cheap you may as well just do it now.
Read less
Was this helpful?
Thank you for voting!
Missing grate foot.
-
Barbara J from Sweetwater, TX
- Really Easy
- Less than 15 mins
-
Pliers
Ordered by phone parts & very pleased with all of transaction.
Was this helpful?
Thank you for voting!