EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JD12W1 General Electric Range - Instructions

All Instructions for the JD12W1
106 - 120 of 131

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Element burned out
  • Samuel from Beavercreek, OH
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
Simply removed two screws to detach element from oven wall, removed two terminal wires then reversed the procedure to install the new element.
Was this helpful?
Thank you for voting!
Lower heating element burned out
  • Tim from La Grange, MO
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
I replaced the element. The new part arrived within 48 hours of being ordered. It worked. The part that sticks out the back of the oven with the connections was a little shorter on the new element which made it more difficult to put the wires on but it was not too difficult.
Was this helpful?
Thank you for voting!
bake element burned out
  • Milt from Manchester, CT
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
A socket set was used to remove the old element. New element was installed with a slotted screw driver and socket set. It took 15 minutes from start to finish to complete the removal and installation. Element tested OK. The bake elment was delivered overnite by Fedx.
Was this helpful?
Thank you for voting!
heating element in oven burned out
  • Dee from Delray Beach, FL
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
--ordered part on line ---It came in the next day without any extra charges for over night shipping! The whole thing with shipping was about $26 and so easy to install. Turned of circuit breaker, unscrewed element and screwed in new one.I was so impressed with 'Part Select'. I have never had a more efficient and inexpensive experience with online shopping. Thank you , I would highly recommed you to everyone! Dee
Was this helpful?
Thank you for voting!
burned/blow out element
  • brian from temple, TX
  • Really Easy
  • Less than 15 mins
  • Socket set
pull oven from wall,unplugged.removed back with small hex or screw driver . opened oven slide element into slot screwed two screws in, pushed in two connectipn on back .replaced cover on back .plugged in and put oven back in place.
Was this helpful?
Thank you for voting!
Replacing bake element
  • Amanda from Oklahoma City, OK
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Undid two screws to pull the element out, and another two to unhook it from the wires. Reverse procedure with the new element and baked some muffins. The hardest part about this repair was getting the part. I typo'd my shipping address and had to knock on a neighbor's door!
Was this helpful?
Thank you for voting!
oven not heating
  • Bonnie from Kahoka, MO
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Delivery of the replacement element was quick.Two days after I ordered. My husband replaced it and said it was easy. He just had to unscrew the old element and disconnect the terminals on the back.I thought I was going to have to buy a new stove,just because my oven element wasn't working. Many thanks!
Was this helpful?
Thank you for voting!
Oven element broken
  • Sue from Brighton, MI
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Took off oven door, removed screws, disconnected wires took out damaged part. Reversed the order. Job complete!
Was this helpful?
Thank you for voting!
Bake element burned out, oven would not get hot
  • Robert from Nashville, TN
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Turned off breaker for oven, removed baking (lower) element, searched website to match up size, shape, and connector-type of replacement part. Placed order and received two days later. Mounted new part in 10 minutes, turned on breaker, and immediately baked fries for children. No problem. Much cheaper and easier than replacing entire buil t-in oven.
Was this helpful?
Thank you for voting!
bottom heating element burn out.
  • Gerald from Lanett, AL
  • Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
got new part delivered two days after ordering. I turned off breaker, used a 1/4" wrench to remove the fasteners holding the heating element to the back inside wall of the oven. used screw drivers (one Phillips and one flathead) to remove the screws holding the heating element to the wires. ensure you pull the wires slight out (easily) to ensure they don't pull back into the oven wall. unplug the element from the wires, install new element in reverse fashion and voila, done.
Was this helpful?
Thank you for voting!
bad bake element
  • Tauna from Holladay, UT
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Turned the power off. Loosened two screws to take the element out. Loosened two more srews to disconnect the element itself from the power. This job was easy squeezy. Within 15 minutes flat I was back on the couch watching old Seinfeld reruns. Two thumbs up for the peeps at Part Select.
Was this helpful?
Thank you for voting!
broken bake element
  • Eunice from North Providence, RI
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Socket set
1. remove two nuts on rear of oven wall.2. remove 2 screws holding connection to element. 3. attach element to oven wires w/ 2 screws. 4. reinstaill 2 nuts to oven wall. 5. Test oven.Make sure power supply is disconnected @ electrical box!
Was this helpful?
Thank you for voting!
Burned out lower element
  • Cindy from VACAVILLE, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Shut off breaker to oven. Removed two screws holding the element. Removed two wires attached. Cut back old wires and crimped on two new eyelet terminals. Screwed wires onto element and reattached. Turned breaker on and tested. Works great. Any girl can do it.
Was this helpful?
Thank you for voting!
element was broken
  • Erwin from minneapolis, MN
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Socket set
replace old one with new one thank you.
Was this helpful?
Thank you for voting!
original bottom heating element melted down into wall
  • Craig from Anderson, SC
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Removed the element and put in a new one. Screw mounted interface to 230 mains involved removing two screws in oven wall and two connecting the main wires. Screws were provided with element. Effortless replacement saved an expensive house call and/or oven replacement. Oven is 44 years old and Parts Select had an original replacement p art here in 4 days at new years. Part was only $18.45. Parts Select rocks!
Was this helpful?
Thank you for voting!
All Instructions for the JD12W1
106 - 120 of 131