JD12W1 General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
oven baking element would not heat
0 of 1 people
found this instruction helpful.
-
PAMELA from RIVERVIEW, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
First , for safety, I flipped breakers to kitchen applicances to cut off the power. Removed the 2 screws that held the old element in place. Pulled it out a couple of inches and disconnected the 2 wires attached to the prongs of the element. Reattached them to the new element, pushed it back in and replaced the screws. Turn power back
... Read more
on and voila! ... was ready to bake again! All this is a matter of 15 mins!
Read less
Was this helpful?
Thank you for voting!
heating element burned out.
0 of 1 people
found this instruction helpful.
-
Claudia from Waterford, CT
- Really Easy
- Less than 15 mins
-
Screw drivers
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, put the new one in and reversed the procedure. Also delivery was great, I ordered the part and received it the next morning. I highly recommend your service.
Was this helpful?
Thank you for voting!
The bake element broke in half and did not heat after that
0 of 1 people
found this instruction helpful.
-
Leslie from Marysville, WA
- Really Easy
- Less than 15 mins
-
Wrench set
First I took out the oven racks removed two screws then I pulled it out a couple of inches to expose the wires and removed the screw. Put the new element in place and replaced the two screws put the wires back and replaced the two screws that hold the element in place.
My stove is over 40 years old matching the 40's - 50's style dec ... Read more or. in my kitchen if I had to replace the entire stove for a reproduction the cost would have been substantually more.
I didn't even have to ask my husband to do this it was easy enough to do myself.
My stove is over 40 years old matching the 40's - 50's style dec ... Read more or. in my kitchen if I had to replace the entire stove for a reproduction the cost would have been substantually more.
I didn't even have to ask my husband to do this it was easy enough to do myself.
Read less
Was this helpful?
Thank you for voting!
Bottom oven coil not heating
0 of 1 people
found this instruction helpful.
-
Sheri from Lakeland, FL
- Really Easy
- Less than 15 mins
-
Wrench (Adjustable)
My husband did the repair in about 15 minutes. It was apparently self explanatory and required no directions. Take the old one out and replace it the same way it came out. And viola!!, the oven works like new - all for about $33. Thanks
Was this helpful?
Thank you for voting!
Burn't up element
0 of 1 people
found this instruction helpful.
-
Duryea from Westminster, CO
- Really Easy
- Less than 15 mins
-
Nutdriver
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. Installed the new element reversing the process above
Was this helpful?
Thank you for voting!
The bottom heating element was not working
0 of 1 people
found this instruction helpful.
-
Ronald from Warr Acres, OK
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
This is a forty five year old oven. It was only four screws and it was done. The new part works like a champ! This save me from buying a $800.00 replacement. I removed the two 1/4 screws holding the element to the back of the oven and then took the flat head screws loose from the terminals on the old element. I then put everything back as
... Read more
it came out; took less than 5 minutes and the part arrived overnight! Thank you again!!
Read less
Was this helpful?
Thank you for voting!
No or little heat from oven.
0 of 1 people
found this instruction helpful.
-
Robert from Plymouth, MA
- Really Easy
- Less than 15 mins
-
Screw drivers
The repair seemed very easy, even before I attempted it. When I recieved my part it was very obvoius that this was my problem part. The old element was worn out(21 yrs old). Having Thanksgiving around the corner, my wife was happy we had a fix to our not ready to replace oven. I was very pleased with your website picture matching choices
... Read more
and the very fast shipping you offered.
Thank You RR from Massachusetts
Thank You RR from Massachusetts
Read less
Was this helpful?
Thank you for voting!
Bake element was damaged
0 of 1 people
found this instruction helpful.
-
Kent from Birmingham, AL
- Really Easy
- Less than 15 mins
-
Wrench (Adjustable)
Removed the panel screws that hold the bake element to the back of the stove. Then I disconnected the old element from the wires. Attached the new element using the provided screws. Reattached the old panel screws to hold the new bake element in place. Works great.
The new bake element doesn't have an item number on it, so I ... Read more kept the old element in a cabinet someplace in case I have to replace this one again some day. I've lost the model number for my very old GE wall oven, so without that item number I'll be in trouble.
The new bake element doesn't have an item number on it, so I ... Read more kept the old element in a cabinet someplace in case I have to replace this one again some day. I've lost the model number for my very old GE wall oven, so without that item number I'll be in trouble.
Read less
Was this helpful?
Thank you for voting!
Broken Bottom Bake Element
0 of 1 people
found this instruction helpful.
-
Jeremy from Tioga, ND
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Super easy, 1 2 3 steps and your done. Make sure to turn power off, remove two screws off of back plate. Remove two screws on wire connectors. Throw old element away and connect both wires to new element and screw back into place. Turn power back on and start cooking.
Was this helpful?
Thank you for voting!
Oven stopped working
0 of 1 people
found this instruction helpful.
-
Rodney from Trenton, OH
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
very easy--cut power supply 2 screws then 2 more on element quick and easy
Was this helpful?
Thank you for voting!
Bake element burned out.
0 of 1 people
found this instruction helpful.
-
Charles from Lancaster, SC
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Removed element and installed new element. Fit perfect, no problems.
Was this helpful?
Thank you for voting!
my bake element sparked and shorted out
0 of 1 people
found this instruction helpful.
-
Lanny from KINGSLEY, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
Unscrewed four screws, removed old element, replaced with new part, done!
Was this helpful?
Thank you for voting!
broken heating element
0 of 1 people
found this instruction helpful.
-
Bruce W. from Portland, OR
- Really Easy
- Less than 15 mins
-
Screw drivers
I took the old element out, compared it to the pictures of the GE replacement elements, identified the correct one and ordered. It came I installed it in 15 minutes and it works just right. I was unable to determine the model number of my old oven so the pictures of replacement elements were invaluable. Thanks for making it so easy to a
... Read more
void calling a repairman.
Read less
Was this helpful?
Thank you for voting!
The bake Element burned into.
0 of 1 people
found this instruction helpful.
-
Harry L from Plainwell, AL
- Easy
- Less than 15 mins
-
Nutdriver, Socket set
I have to tell you i got wrong partfirst it was my mistake I got on phone and the lady understood my problem and told me procedure of returning part I got the right partnext day. I watched the video on how to do the job,although O new how. The video was a wee bit off,from what was easy.The man doing the talk through repair showed detachin
... Read more
g the connections and bending each one back s as to not go back inside there inclosure. The connectors were way short on this one .The only way to attach the element was to take off back cover and push them together back there. Took couple extra minutes ,but job don e Ps will be ordering something soon
Read less
Was this helpful?
Thank you for voting!
Upper oven of dual oven stopped heating
0 of 1 people
found this instruction helpful.
-
Erik from San Angelo, TX
- Easy
- Less than 15 mins
-
Socket set, Wrench (Adjustable)
diagnosed repair by installing heating element from lower oven into upper oven, and it worked. Ordered proper replacement part and installed using tools above. No problem besides the tight space.
Was this helpful?
Thank you for voting!