- Home
- JCSP38GV2BB
- Instructions
JCSP38GV2BB General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bake element broke
0 of 1 people
found this instruction helpful.
-
Laura from Telluride, CO
- Easy
- 15 - 30 mins
-
Socket set
Removed the two screws and pulled out the bake element. Then plugged in the new element and replaced the screw. Easy
Was this helpful?
Thank you for voting!
oven elements sparked and would not turn off
0 of 1 people
found this instruction helpful.
-
ophelia from paducah, KY
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
removed two screws, pulled element out (which broke at the sparking site) Took screw driver to push off where the element was connected. Put new one in, re-did screws. Turned on and off oven. This company was great to work with, smooth sailing. It was funny when we noticed the problem-Husband said $125.00 repair, I got on net and said no
... Read more
about $40. He is taking me out to dinner tonight.
Read less
Was this helpful?
Thank you for voting!
Two stage burner was not working on the outer part of burner.
0 of 1 people
found this instruction helpful.
-
Gregory from Pleasant Valley, MO
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
Locate breaker box and turn off breaker to stove. Removed the two screw in front that hold the top in place. Raised the top and supported it with the box the new burner came in. Removed two screws that held the burner in place and the 5 wires one at a time an installed them on the new burner. Put new burner in place and installed two
... Read more
mounting screws. Reinstalled the two screws in the front to hold the top in place then turned the breaker back on and tested burner. Worked great. Received part in 2 days.
Read less
Was this helpful?
Thank you for voting!
oven would not heat on bake
0 of 1 people
found this instruction helpful.
-
Larry from Burnsville, NC
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
The hardest part of repair was moving the oven from the cabnets to unplug and gain access to rear of oven. Remove rear cover panel unplug two spade connectors attached to the heating element. Open oven door and remove the two screws holding the heating element to back of oven. Pull heating element out. Then slide the new element in an
... Read more
d assemble in reverse order.
Read less
Was this helpful?
Thank you for voting!
baking element sparking
0 of 1 people
found this instruction helpful.
-
Maureen from Cedar Falls, IA
- Really Easy
- 15 - 30 mins
-
Pliers
1. Turned breaker to the oven to the off position.
2. Removed screws from back of oven-This was the most difficult part of the entire process!
3. Pull out element about 3", then tugged a little harder to expose the wiring.
4. Unhooked wiring from element.
All of this took about 15 minutes.
When new one arrived ... Read more (less than 48 hours), I did the reverse of the above. This took about 6 minutes replace with new element. Thanks so much!
2. Removed screws from back of oven-This was the most difficult part of the entire process!
3. Pull out element about 3", then tugged a little harder to expose the wiring.
4. Unhooked wiring from element.
All of this took about 15 minutes.
When new one arrived ... Read more (less than 48 hours), I did the reverse of the above. This took about 6 minutes replace with new element. Thanks so much!
Read less
Was this helpful?
Thank you for voting!
Replace Bake Element
0 of 1 people
found this instruction helpful.
-
Jeff from Greensboro, NC
- Really Easy
- 15 - 30 mins
-
Socket set
Piece of cake. Pulled range out, unplugged it, opened stove, unscrewed element from back of stove w/ socket wrench, pulled out 1/2 way, unplugged bad bake element from the 2 wires, plugged in new bake element in, reattached to back of oven, plugged in stove and it worked.
Was this helpful?
Thank you for voting!
Bottom element would not heat
0 of 1 people
found this instruction helpful.
-
GARY from OREM, UT
- Really Easy
- 15 - 30 mins
-
Nutdriver
Remove two screws holding element. Pull element forward exposing connections. Pull connections apart. Replace with new element. replace screws. Done
Was this helpful?
Thank you for voting!
Bake element burned out
0 of 1 people
found this instruction helpful.
-
eric from Melbourne, FL
- Really Easy
- 15 - 30 mins
-
Nutdriver
With less than 24 hrs from ordering to delivery, I was making cookies. Installation was quick and painless.
Was this helpful?
Thank you for voting!
Old Element Was Rusted.
0 of 1 people
found this instruction helpful.
-
Joan from Mascotte, FL
- Easy
- 15 - 30 mins
-
Screw drivers
Very well, I made a mistake with the model #. So I had to return and reorder .
Was this helpful?
Thank you for voting!
The bottom bake unit burned out
0 of 1 people
found this instruction helpful.
-
Larry from Fredericksburg, VA
- Really Easy
- 15 - 30 mins
-
Socket set
Very simple. Two small hex shaped screws hold the unit to the back of the stove. Remove those with a small socket wrench. Rachet type makes the job easier. Gently pull the element from the back of the stove. Remove the two push-on wires from the element. They simple pull off. The elements have supporting feet toward the front. Thos
... Read more
e must be down to rest the element on the bottom of the stove. Replace the push-on wires, push the element back into the holes in the rear of the stove and screw the small hex shaped screws back into the oven wall. The job is done.
Read less
Was this helpful?
Thank you for voting!
bake element burned out
0 of 1 people
found this instruction helpful.
-
Dean from Rolla, MO
- Easy
- 15 - 30 mins
-
Nutdriver
I turned the power off.Pushed on the terminals,and used a nut driver to secure the element to the oven back wall.Great service.I recieved the part in 24 hours with reg. shipping at a great price,Unbelieveable!!!
Was this helpful?
Thank you for voting!
Element turned into a welder
0 of 1 people
found this instruction helpful.
-
Greg from Hamburg, IA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
pulled out oven, unplugged power. Removed back cover for element, disconnect old element. Moved to front of oven and removed the two screws that held the old element,removed old element. Installed new element, connect element, installed cover, reconnect power.
Was this helpful?
Thank you for voting!
burned out baking element
0 of 1 people
found this instruction helpful.
-
Ramsey from Niceville, FL
- Easy
- 15 - 30 mins
-
Pliers
Unplugged the stove. Unscrewed the element. opened the rear cover to reach wires. Passed wires through the slot and connected the element. Screwed the element in place. Reinstalled the rear cover. Plugged the stove and pushed it back to place. Tested the oven, it worked.
Was this helpful?
Thank you for voting!
notice oven wasnt getting hot, seen a burned spot on lower burner in oven, knew then it needed to be replaced.
0 of 1 people
found this instruction helpful.
-
Rhonda from Rincon, GA
- Really Easy
- 15 - 30 mins
-
Nutdriver
After noticing it needed replaced I went to PartSelect, put in model/serial# and order that easy. It was here the next day. The oven was fixed. Now back to baking...thanks PartSelect.
Was this helpful?
Thank you for voting!
A simple repair and a bit of advice...
0 of 1 people
found this instruction helpful.
-
John from Virden, IL
- Easy
- 15 - 30 mins
-
Nutdriver, Pliers
I really like my repairman, but prefer to do it myself. PartSelect rocks...reasonable prices, really fast shipping AND online repair videos keep me coming back. The repair was exactly as the video described, but one of the wires came loose as I was pulling the element through. I thought I'd have to tear the stove apart to get to it, but
... Read more
luckily, all of the wiring is contained in a raceway that runs along the back of the stove. After removing it to expose the wires, I would recommend doing so instead of trying to pull the wires through as the video shows. In doing so, the terminal connections are readily accessible and it's much easier to remove and install the bake element without having to worry about feeding the wires through at the same time and running the risk of damaging them. Overall, a very simple, quick repair that saved me a $50-75 service call.
Read less
Was this helpful?
Thank you for voting!