EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JCSP38GV2BB General Electric Range - Instructions

All Instructions for the JCSP38GV2BB
46 - 60 of 322

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
My large burner had "burnt out" and would not turn on
2 of 2 people found this instruction helpful.
  • Michael from Orlando, FL
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
I removed the screws from the underside of the stovetop, lifted up the top, propped it up to keep it from falling (using a large book), and removed the old burner by unscrewing it from the top and removing the wire connections. I then screwed the new burner into the top, and attached the wires back to the burner, dropped the top down (ge ntly and carefully, of course), and screwed the top back down to the rest of the stove. It was fairly quick and painless. Although, putting the stove back into his position was not easy, but that was no fault of the stove!!
Was this helpful?
Thank you for voting!
the small burner was burnt out
2 of 2 people found this instruction helpful.
  • Jack from Columbiaville, MI
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
after removing the two screws that are just inside the oven, I propted the top open with the box that the part came in. I drew and labeled the wires as I took them off using a color coding. next I removed the two clips that held the burner in place and marked on the new burner exactly where the clips were attached. Replacing the clips was possibly the hardest part of the whole operation. When you replace the burner, don't forget to replace the insulation pad that is stuck one the metal where the conections are. I missed this and had to reopen the stovetop and slid it on after I was finished. Otherwise it went pretty smooth.
Was this helpful?
Thank you for voting!
No Instructions
2 of 2 people found this instruction helpful.
  • Richard from FAYETTEVILLE, GA
  • Difficult
  • More than 2 hours
  • Nutdriver, Pliers, Wrench (Adjustable)
Lots of jiggling until I found the screws to remove. After finally getting the top off the base there was the Instructions on a pamphlet taped to the bottom. The key tho get the top off is to remove the face and remove the proper screws( they are identifiable)unplug the electric plug 2 screws on the back sides and poof it is free!
Was this helpful?
Thank you for voting!
Outer burner was not working
2 of 2 people found this instruction helpful.
  • Kevin from Leominster, MA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Very simple repair. Remove two screws to lift the range top. Then remove the two screws holding the element in place. Disconnect the wires from the old element, connect the wires to the new element. Reverse the procedure and you are done. Total time is anywhere from 15 to 30 minutes.
Was this helpful?
Thank you for voting!
Element would not respond to changes in temperature setting
3 of 5 people found this instruction helpful.
  • douglas from chance, VA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
Turn off power to cook top. Remove 2 screws that hold the cook top to countertop. Lift complete cook top from counter and place diagonally across opening. Remove 10 screws that hold glass top to the component cabinet. Make a diagram of wiring to element. Disconnect wires. Remove 2 mounting brackets from bottom of old element and posi tion them on new element and screw tight. Wire new element as diagrammed earlier. Replace glass top on component cabinet and reinstall 10 screws. Place unit back into counter opening and secure with 2 straps. Turn power back on. Stand back and enjoy your accomplishment.
Was this helpful?
Thank you for voting!
bake element burnt into
2 of 3 people found this instruction helpful.
  • gary from assumption, IL
  • Easy
  • 15 - 30 mins
  • Nutdriver
repair went fine, real easy.
Was this helpful?
Thank you for voting!
oven stopped heating and element appeared broken
2 of 3 people found this instruction helpful.
  • Henry J from South Haven, MI
  • Really Easy
  • 15 - 30 mins
  • Socket set
The customer service rep was brilliant in finding the
right part number! It was sent the following day
(with email to let me know) The part itself was just
exactly like the old one. I simply turned off the power,
removed the 2 metal screws and unplugged the
broken element. The new one fit properly and works ... Read more />like a million dollars. For about $50, you made me
look like a hero in my own house! Thjank you
Was this helpful?
Thank you for voting!
Heat element died
2 of 3 people found this instruction helpful.
  • Andrea Hines from ELGIN, AZ
  • Very Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Very easy to replace. So easy even a man can do it.
Was this helpful?
Thank you for voting!
inner coil of burner no good..supposed to last forever!??
2 of 3 people found this instruction helpful.
  • D. Scott from Melbourne Village, FL
  • Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
Remove two screws hold cook top down: prop it open with piece of wood. (TURN OFF POWER TO RANGE FIRST!). Carefully make diagram of where wires go: remove and replace.. piece of cake!
Was this helpful?
Thank you for voting!
Intermittent heat then no heat on oven element
2 of 3 people found this instruction helpful.
  • Bruce from AKRON, PA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
With multimeter checked resistance of oven sensor. Specs called for 1100 ohms. It was off by 27 ohms. The sensor from Part Select had exact wire connection as original. Then just matter of undoing old and reconnecting with new one.

One unsatisfactory event. I asked Part Select why my clock did not work or light up(timer works ok) . Answer was: sorry we have no time to help you. That soured the otherwise happy experience.
Was this helpful?
Thank you for voting!
Oven door glass broke
2 of 3 people found this instruction helpful.
  • BEVERLY from PHENIX CITY, AL
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
First, I cleaned all the glass from the stove. then I inserted the replacement glass into the slots and screwed the bolts back into the stove. It took me about 1o minutes to do repair. It waS VERY EASY..
Was this helpful?
Thank you for voting!
Burner burned out
1 person found this instruction helpful.
  • Daniel from Norborne, MO
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Very easy. Unpluged range from outlet, took two screws from the front under side of the range top, raised cook top up, took off four wires from burner, removed two screws than holds burner on cook top, replaced with new burner, installed two screws that hold burner in place, installed the four wires to burner, lowered cook top back into place replaced two screws that hold cook top down, pluged back into outlet. DONE!
Was this helpful?
Thank you for voting!
Burner no longer heats
1 person found this instruction helpful.
  • Anthony from Apopka, FL
  • Very Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Remove two screws with nut driver that holds range top down. Turn off breaker or unplug before lifting top. Brace top with 2x4. Take picture with cell phone just in case. Orient replacement part with old burner. Remove one wire at a time and install on new burner in corresponding correcting terminal. be sure they are snug. Drop top insta ll nuts . Test! Done! I am not an electrician!!!!!!!! Please do not publish !!!!
Was this helpful?
Thank you for voting!
Burner didn't go on
1 person found this instruction helpful.
  • Mike from Hatfield, PA
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Turned off juice
Pulled stove from wall
Unscrewed 2 screws to loosen range top
Lifted n propped top
Unplugged 4 wires
Unscrewed burner assembly
Installed burner-reversed steps to reassemble
Was this helpful?
Thank you for voting!
Burned out
1 person found this instruction helpful.
  • Dean from Elkton, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Remove two screws to loosen the ceramic top....prop top open and change part...the part was exactly the same...change wires from one to the other and transfer clamps.....1st grade craft class would have done it in half the time I did......you folks have your parts inventory and description application to a science.....God Bless
Was this helpful?
Thank you for voting!
All Instructions for the JCSP38GV2BB
46 - 60 of 322