EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JCBP80CJ1CC General Electric Range - Instructions

All Instructions for the JCBP80CJ1CC
91 - 105 of 463

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven Wouldn't Heat
7 of 13 people found this instruction helpful.
  • Russell from Yuma, AZ
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers, Socket set
Replaced
Was this helpful?
Thank you for voting!
Interior glass cracked due to heat
5 of 7 people found this instruction helpful.
  • suzanne from brighton, MI
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
First we confirmed that the part delivered was the correct piece needed. We unscrewed the interior panel of the door and separated the insulation from the two pieces so the old glass frame could be removed. The rope type gasket gave us some trouble as it was difficult to stage the insulation, glass frame and rope at one time. Once we g ot the pieces in place it was a breeze to screw the panel back in just in time to make pies for our Thanksgiving dinner.
Was this helpful?
Thank you for voting!
oven would not heat
5 of 8 people found this instruction helpful.
  • Jim from Williamsburg, VA
  • Easy
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers
I removed the 4 hex head screws holding the control panel , then the other 4 slotted screws. Disconnected all wires being careful to keep track of the color coding. Had a little trouble with the adhesive holding the face plate( I don't know why they even used it). Put the new panel in and reconnected it. Re set circuit breaker and tried t he oven. It still wouldn't heat. it wasn't the control panel, but a burned out wire connecting the element in the back of the oven. Well, anyway I learned how to do the job and the the new panel activates better, so all was not lost.
Was this helpful?
Thank you for voting!
Burner element was burnt
4 of 5 people found this instruction helpful.
  • Chandra from Naugaeuck, CT
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Socket set
It was very easy. First turn off the power. Remove two screws to pick up the hood then remove two screws holding the element. Tag the wires with number. Unplug the old burner attach the wires to new burner. Attach two screws with spring to hold the burner, put the hood down and put the screws holding the top hood.
Was this helpful?
Thank you for voting!
MYy wife left the oven racks in and used oven cleaner.
4 of 5 people found this instruction helpful.
  • CIRILO from WHITING, NJ
  • Really Easy
  • Less than 15 mins
Removed old racks and replaced with new racks.
Was this helpful?
Thank you for voting!
The front right outer element was defective.
4 of 5 people found this instruction helpful.
  • Peter from Abbeville, LA
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
My cooktop is a stand alone unit mounted in a counter top not associated with an oven.
-Removed power to the cook top. Breaker off.
-Lifted the cook top straight up from the counter top and placed two 24 inch board strips to support it above the counter top. This was very easy by pushing up from the bottom of the cook top. T his is a two person job preferably.
-Removed the six phillip screws below the glass surface edge. 3 in the front, three in the back.
-Remove knobs and remove the glass top by lifting straight up.
-Record the wire positions on the element on paper and remove the connections.
-The element is mounted on two spring loaded studs that have spring clips as a retainer. Remove the two clips by pulling straight up with a plier or needlenose.
-The replacement element did not come equipped with the two mounting ears that the original had. I removed the two ears from the defective element and installed them on the new element. Very easy. Two phillips screws. The elements have perferations in the correct areas to accommodate this.
-Placed the new element in position and reinstalled the spring clips.
-Install the wiring terminals in the correct positions.
-Reinstalled the glass surface and the six phillips screws. Reinstall the knobs.
-Lower the cook top back into its counter top position.
-Return power to the cook top.
-Installation complete. Very simple!
Was this helpful?
Thank you for voting!
top oven heating element
4 of 5 people found this instruction helpful.
  • marlene from Pilgrim, KY
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
I first turned off power, then I removed the old top oven heating element, I connected the new element to power supply then placed the element back into holders.
Was this helpful?
Thank you for voting!
The dual burnner had somthing drop on it and it went out
3 of 3 people found this instruction helpful.
  • Thad from Layton, UT
  • A Bit Difficult
  • 15 - 30 mins
  • Screw drivers
I pulled out the range from the wall unplugged it from the wall then i opened the oven door and removed the two small screws on the front off the range and lifted the glass top and supported it with a 1/2" X 18inc wooden dowel, then i removed the two burner retaining screws with a small Phillips screw driver and removed the wires from the burner,
then i replaced the burner with the new one and reconnected the wires and placed the burner in to the two retaining clips and then tightened the two screws then i removed the wooden dowel and installed the two screws on the front bottom side on the range then i plugged in the range in and tested the burner then put the range back against the wall.
Was this helpful?
Thank you for voting!
Oven would not heat up
3 of 3 people found this instruction helpful.
  • Myron from SCOTTSDALE, AZ
  • Very Easy
  • 15 - 30 mins
  • Socket set
Changed the lower heating element. Simple, simple, simple. I first went on YouTube and watched a couple of videos. Reassurance is a good thing. Okay here we go. 1) Pull the oven out from the wall 2) UNPLUG 3) remove the racks in the oven 4) Unscrew the (2) screws holding the element to the back wall of the oven. 5) There are t wo (2) connections that you simply pull off. Remove the element. 6) Throw the old heating element away and connect the NEW element where the OLD one was. 7) Put the old screws back in. Plug the oven back in and test. VOILA!!! you are now a repairman.
Was this helpful?
Thank you for voting!
Grease spilled on old gasket----gasket hardened
5 of 9 people found this instruction helpful.
  • Delores from Rocksprings, TX
  • Really Easy
  • Less than 15 mins
Simply pulled old gasket from door and pushed new gasket clips into existing holes and tucked in ends at bottom of door.
Was this helpful?
Thank you for voting!
Incorrect oven temperature due to defective temperature sensor.
3 of 3 people found this instruction helpful.
  • Anthony from FARMINGVILLE, NY
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Performed repair using a video for reference.
Was this helpful?
Thank you for voting!
When you touched any button on the controls LOC on appeared.
3 of 3 people found this instruction helpful.
  • Roger from HUNTSVILLE, AL
  • Very Easy
  • Less than 15 mins
Talked to parts select tech after ordering the control board. Tech advised me that he felt the range could be repaired without installing any parts. Advised me to contact manufacture tech support and explain the problem. I did to find that the child safety lock was on, probably from cleaning and touching too many buttons at once while whi pping surface. Told me to hold down + and - at the same time for three seconds and it was fixed.
Parts select tech had told me don’t worry the parts are guaranteed so I called for a RMA and returned the parts for a refund. Thanks Parts Select, y’all are real professionals and that is greatly appreciated.
Thank you all.
Was this helpful?
Thank you for voting!
Switch was not turning off range indicator light
3 of 3 people found this instruction helpful.
  • Charles from PORTLAND, OR
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Pulled stove out and unplugged. At the rear of the range there were 4 faster. Used a nutdriver piece in an electric drill. Pulled off the cover and located the switch. At the front of the stove, I removed the knob and unscrewed two screws releasing the switch. I undid and replaced each wire connector one-by-one to avoid any wrong connecti ons. Replaced and secured the switch and replace the back panel. All secured, power on and fixed! Easy repair, but something that had been put off for a year!
Also follow the installation videos from PartSelect - very helpful!
Was this helpful?
Thank you for voting!
old oven racks were ruined from self-cleaning oven
4 of 6 people found this instruction helpful.
  • Joan from Holt, MI
  • Really Easy
  • Less than 15 mins
My exact model number did not appear in the listings, nor were the oven rack measurements clearly stated in items offered. I sent an email to customer service, received an immediate response with the correct answer (re: which part would fit my oven), ordered this item, and had a shipment arrival within days. The racks are a perfect fit, and they look great. The price is less than any other site I investigated.
Was this helpful?
Thank you for voting!
Heating element burnt out
3 of 3 people found this instruction helpful.
  • Margie from MYRTLE BEACH, SC
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
I am a 62 year old woman with NO experience fixing appliances However I didn't have the money for a repairman so I ordered the part and googled "Hiw to change a heating element in a GE range". All the instructions were there and now my oven is working perfectly. I even posted on Facebook for my female friends to encourage them to do repai rs themselves. What a GREAT feeling.
Was this helpful?
Thank you for voting!
All Instructions for the JCBP80CJ1CC
91 - 105 of 463