EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JCBP79SK2SS General Electric Range - Instructions

All Instructions for the JCBP79SK2SS
121 - 135 of 174

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
burner was inoperative
0 of 2 people found this instruction helpful.
  • bryan from cocoa, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
verified switch operation , checked continuity of burner element found open ordered new part and installed next day
after extremely fast
service from partselect thank you
Was this helpful?
Thank you for voting!
Burner not heating.
1 of 5 people found this instruction helpful.
  • Jack from Greensboro, GA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Isolated to control switch.

Replaced
Was this helpful?
Thank you for voting!
Light burnt out.
2 of 8 people found this instruction helpful.
  • Roscoe G from ROCHESTER, NY
  • Very Easy
  • Less than 15 mins
Turned the wire protector to the side. Turned out the old bulb and replaced it with the new. Turned the wire protector back in place and I'm like new.
Was this helpful?
Thank you for voting!
Orange light "Hot Stovetop" lense broke off.
  • John from Woodbridge, VA
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Parts arrived in record time and the right parts. The detailed diagram was so helpful in finding exactly the part I needed to order. Was so easy my girlfriend with no mechanical or electrical experience completely helped me through the entire project. She secured the electrical breaker to the range, and I had the top back to the oven r emoved. I showed her how the little white box simply slides off the lens cover, then replaced the new one in the holes and slide it back on. Secured the back and she turned on the breaker back on...and all lights work. Thanks for making this project easy, simple and quick.
Was this helpful?
Thank you for voting!
Needed to replace the door gasket on my range
  • Dana from Yonkers, NY
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Went super fast--very easy. Part fit perfectly and the installation was a snap.
Was this helpful?
Thank you for voting!
Oven light wire broken, damaged socket
  • Patricia from Brandenburg, KY
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Pliers
Remove light bail, glass cover held by two nut screws. Pull socket, removed clips in back, replaced wire connectors, placed new socket in, then glass cover and bail. Wire connected in back, cover plate replaced.
Was this helpful?
Thank you for voting!
Broken drawer support
  • Mario from Deer Park, WA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Followed the example picture on the part bag. Anyone could do this, incredibly easy. Took about 4 minutes to install both sides.
Was this helpful?
Thank you for voting!
melted the knobs with a hot cookie sheet
  • Rita from Gem, KS
  • Really Easy
  • Less than 15 mins
pulled these off and pushed off the new ones. This company is great - knobs fit - good price - stove fixed.
Was this helpful?
Thank you for voting!
Range lower drawer would not stay on track.
  • Richard from Newark, DE
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Easy to install replacement parts using the screws provided.
Was this helpful?
Thank you for voting!
gasket leaks heat from oven
  • ROBERT from SLIDELL, LA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
pull gasket from door bottom and pull gasket to release retainers in door frame. refit new seal in retainer holes and push gasket into slots at bottom of door. done perfect fit.
Was this helpful?
Thank you for voting!
Convection fan came loose from shaft
  • Thomas from Albuquerque, NM
  • Easy
  • 15 - 30 mins
  • Socket set
Convection fan came loose from the shaft with a lout rattle and grinding as the fan spun down. Had to remove four metal screws to remove the fan cover. Initially tried to just put the nut back on to hold the fan. However, I could not get the nut to start, so I assumed that threads were stripped on the nut or the shaft. Ordered the rep lacement nut, hoping that it was the nut that was the problem. However, I had the same problem with the new nut. I could see no damage on the shaft. It finally occurred to me that the nut and shaft had left-hand threads (counter-clockwise to tighten). At that point, it was extremely easy to put the nut back on and tighten it. I did not try using the old nut, since I had already received the new one, but I'm certain that if I had come to that realization earlier, I could have saved time and money. So, if you have the same problem, try putting the nut on "backwards."
Was this helpful?
Thank you for voting!
F2 reading
  • lynn from sunnyside, NY
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
Followed the instructions that were sent to me by E-Mail.
Was this helpful?
Thank you for voting!
burned out oven light
  • Herbert from Virginia Beach, VA
  • Easy
  • 15 - 30 mins
  • Pliers, Socket set
Turned off the power to the stove. Removed the oven door, Removed two screws holding the metal housing from the oven wall. pulled the assembly forward, removed the two electrical wires from the back of the socket, installed new gasket on back of metal assembly,inserted the wires thru the hole in the metal assembly, attached the wires to t he new socket, pushed the new socket in place making sure the two holding clamps were in place, screwed assembly back in oven wall, replaced new bulb, replaced glass cover over bulb, Replaced oven door, turned the power back on, Light works like new.
Was this helpful?
Thank you for voting!
broken light socket
  • James from Monterey, TN
  • Easy
  • 15 - 30 mins
  • Nutdriver
The only tool needed was a nutdriver to remove the lamp socket. I needed my head mounted light to see what I was doing, and everything went smoothly from there. Simple job.
Was this helpful?
Thank you for voting!
Hard to move drawer in and out because the rear drawer supports broke off.
  • Steven from Lansdale, PA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Repair was very easy - less than a few minutes - just had to screw in 2 screws to the new drawer supports.
Was this helpful?
Thank you for voting!
All Instructions for the JCBP79SK2SS
121 - 135 of 174