EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JCBP71SM2SS General Electric Range - Instructions

All Instructions for the JCBP71SM2SS
91 - 105 of 385

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven would not heat up
3 of 3 people found this instruction helpful.
  • Myron from SCOTTSDALE, AZ
  • Very Easy
  • 15 - 30 mins
  • Socket set
Changed the lower heating element. Simple, simple, simple. I first went on YouTube and watched a couple of videos. Reassurance is a good thing. Okay here we go. 1) Pull the oven out from the wall 2) UNPLUG 3) remove the racks in the oven 4) Unscrew the (2) screws holding the element to the back wall of the oven. 5) There are t wo (2) connections that you simply pull off. Remove the element. 6) Throw the old heating element away and connect the NEW element where the OLD one was. 7) Put the old screws back in. Plug the oven back in and test. VOILA!!! you are now a repairman.
Was this helpful?
Thank you for voting!
Needed to replace oven door gasket
3 of 3 people found this instruction helpful.
  • Jayne from EAST PEORIA, IL
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
Watched youtube video. Very easy to replace
Was this helpful?
Thank you for voting!
When you touched any button on the controls LOC on appeared.
3 of 3 people found this instruction helpful.
  • Roger from HUNTSVILLE, AL
  • Very Easy
  • Less than 15 mins
Talked to parts select tech after ordering the control board. Tech advised me that he felt the range could be repaired without installing any parts. Advised me to contact manufacture tech support and explain the problem. I did to find that the child safety lock was on, probably from cleaning and touching too many buttons at once while whi pping surface. Told me to hold down + and - at the same time for three seconds and it was fixed.
Parts select tech had told me don’t worry the parts are guaranteed so I called for a RMA and returned the parts for a refund. Thanks Parts Select, y’all are real professionals and that is greatly appreciated.
Thank you all.
Was this helpful?
Thank you for voting!
Incorrect oven temperature due to defective temperature sensor.
3 of 3 people found this instruction helpful.
  • Anthony from FARMINGVILLE, NY
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Performed repair using a video for reference.
Was this helpful?
Thank you for voting!
Large right burner would only light in the outside and would not stay on
3 of 3 people found this instruction helpful.
  • JoAnne from LAMBERTVILLE, MI
  • Very Difficult
  • More than 2 hours
  • Wrench set
Ordered the part. Received the box damaged and did not realize the part was damaged until our son came all the way from Columbus Ohio to install it. We ordered another part which came in a timely manner. Even though I reported the problem and told them that we are not very computer literate they still would not accept that the part was da maged until we sent a picture. Our son came back from Columbus to install the new part which took about an hour. He took pictures which I was then able to send. They then asked for a serial number. I had already sent all the numbers from the part but that is when they said they wanted the serial number from the stove. We are elderly and getting that required me getting on my hands and knees to get it near the floor. Luckily I was able to get up. After multiple emails I now have to send the part back. Good luck to anyone working with this company. I will be waiting for them to reimburse me for the defective part.
Was this helpful?
Thank you for voting!
Heating element burnt out
3 of 3 people found this instruction helpful.
  • Margie from MYRTLE BEACH, SC
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
I am a 62 year old woman with NO experience fixing appliances However I didn't have the money for a repairman so I ordered the part and googled "Hiw to change a heating element in a GE range". All the instructions were there and now my oven is working perfectly. I even posted on Facebook for my female friends to encourage them to do repai rs themselves. What a GREAT feeling.
Was this helpful?
Thank you for voting!
Inner glass assembly had cracked
3 of 3 people found this instruction helpful.
  • Richard from Gorham, ME
  • Really Easy
  • 30 - 60 mins
  • Socket set, Wrench set
Took the oven door off and removed the inner door panel, put new glass assembly part in and reassembled. The hard part was getting the door hinges locked back into place.
Was this helpful?
Thank you for voting!
drwer slide under stove broke off.
3 of 4 people found this instruction helpful.
  • paul from sewell, NJ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
recieved part the next day. looked different but I followed instructions and the part worked perfect.
Was this helpful?
Thank you for voting!
Burner food on racks
3 of 4 people found this instruction helpful.
  • John from Metairie, LA
  • Really Easy
  • Less than 15 mins
Nothing really rocket science here. The oven racks had burned on food, and I just replaced the racks..... slide out the old and slide in the new. Done !
Was this helpful?
Thank you for voting!
The temperature indicator light on the oven was broken.
3 of 4 people found this instruction helpful.
  • Jewel from Nacogdoches, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I removed the control panel by removing 7 screws and replaced the light indicator and lens.
Was this helpful?
Thank you for voting!
Did not have a problem, just need an extra oven rack.
3 of 4 people found this instruction helpful.
  • Catherine from Bethel, CT
  • Really Easy
  • Less than 15 mins
Placing the order was very easy. Shipping was fast and excellent packaging. Thank you very much!
Was this helpful?
Thank you for voting!
Burner remained on "high" as contacts were fused together
2 of 2 people found this instruction helpful.
  • Bruce from HOLMEN, WI
  • Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Easy removal of switch and installation of new switch block.
Was this helpful?
Thank you for voting!
Oven drawer open and close incorrectly
2 of 2 people found this instruction helpful.
  • James from Goldsboro, NC
  • Easy
  • Less than 15 mins
  • Screw drivers
First I removed the oven drawer. Verified that the support clips would rest correctly on rail, then review installation document with supports to locate alternate location for replacement supports. I did have to personally locate 2 fastners not provided with the supports ot complete installation. After installation, oven drawer opens a nd closes smoothly.
Was this helpful?
Thank you for voting!
lights blown out
6 of 14 people found this instruction helpful.
  • Gerald from WINTERVILLE, GA
  • Very Easy
  • Less than 15 mins
replaced lights in refrigirator and freezer
Was this helpful?
Thank you for voting!
Just didn't work no pwr to it
2 of 2 people found this instruction helpful.
  • Jerry from HOPEWELL, VA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Killed braker first, removed four screws from back, then unplugged all the wiring, then removed four screw that hold the unit on stove, pealed off the face decal, put that on the new on and just reversed the take off press.
Was this helpful?
Thank you for voting!
All Instructions for the JCBP71SM2SS
91 - 105 of 385