EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JCBP36DM1WW General Electric Range - Instructions

All Instructions for the JCBP36DM1WW
121 - 135 of 241

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
replacment of oven door handle
3 of 9 people found this instruction helpful.
  • Todd from Cincinnati, OH
  • Really Easy
  • Less than 15 mins
  • Nutdriver
the part was an exact fit. the instalation of the product was very easy. I just removed the 4 hex bolts and 2 star head bolts and reattached. Instalation took about 10 minutes.
Was this helpful?
Thank you for voting!
Bake element burned out
0 of 1 people found this instruction helpful.
  • Barry from Malvern, PA
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Pliers
Was a piece of cake removed 2 screws, pulled element out. Pulled the wires ooff the old unit and put them on new unit and screwed it back in.
Was this helpful?
Thank you for voting!
oven was not getting up to temp
0 of 1 people found this instruction helpful.
  • walter from townshend, VT
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Once I opened up the back of the range, the sensor wires where there and burnt just like your info said. One nut to take off in the oven and the sensor came right out and the new one went right in. The oven works great, cooked the turkey today. The worst part of the repare was the cleaning behind and under the range, it hasn't moved since it was put in 6 years ago. Very pleased with PS.
Was this helpful?
Thank you for voting!
None
0 of 1 people found this instruction helpful.
  • Nicholas from Poynette, WI
  • Really Easy
  • Less than 15 mins
  • Nutdriver
The repair was very simple removed old element by removing two screws and disconnecting the element from the wires and reinstalling the new one.
Was this helpful?
Thank you for voting!
Replace old burner bowls
0 of 1 people found this instruction helpful.
  • Daniel J. from Vernon, CT
  • Really Easy
  • Less than 15 mins
It was easy to just replace the old burner bowls rather than try to clean them. The peices ordered from Parts Select were a perfect match and they arrived on a timely basis.
Was this helpful?
Thank you for voting!
Replace Drip Pans on Stove Top
0 of 1 people found this instruction helpful.
  • Shawn from Lubbock, TX
  • Really Easy
  • Less than 15 mins
Just removed the old drip pans and then inserted new ones...pretty dog gone easy!
Was this helpful?
Thank you for voting!
Change out burner bowls
0 of 1 people found this instruction helpful.
  • Carolee from Carson City, NV
  • Really Easy
  • Less than 15 mins
Took out the old ones and replaced with the new ones. Very simple task. It didn't take 5 minutes.
Was this helpful?
Thank you for voting!
no heat in oven
0 of 1 people found this instruction helpful.
  • ronda from kingston, OK
  • Easy
  • Less than 15 mins
  • Nutdriver
removed element found a crack and replaced with new one I got from PartSelect.com. with fast fast shipping,thanks you saved me for spendin more money on a new one. it happened on christmas day of course......
Was this helpful?
Thank you for voting!
original drip pans scrubbed so much-rusted....
0 of 1 people found this instruction helpful.
  • Jane from Quarryville, PA
  • Really Easy
  • Less than 15 mins
Took out the original drip pans and set in replacements which I ordered in black enamel.
Slipped right in and look great as the oven door glass is also black. Look like they came with the range.
Was this helpful?
Thank you for voting!
bakeing element burned out
0 of 1 people found this instruction helpful.
  • Bob from Surry, VA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Removed to screws on bracket and sliped the element out. Inserted new element and installed bracket and two screws.
Was this helpful?
Thank you for voting!
Element went bad
0 of 1 people found this instruction helpful.
  • Steve from Blue Hill, NE
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
turned electricity off, removed element using a screwdriver had to take the back panel off, attached new element put stove back and tried it out and it worked probably 20 minutes. Also need to comment that was totally shocked how fast the element was shipped to me, ordered the part in the p.m. and it was here not the next day but the next ....awesome
Was this helpful?
Thank you for voting!
The bottom burner melted
0 of 1 people found this instruction helpful.
  • Linda from Virginia Beach, VA
  • Easy
  • 15 - 30 mins
  • Pliers
First we removed the screws inside the oven. Next, the oven backing was removed by unscrewing one side and one bottom bolt which exposed the clips for the burner. The clips were removed from the old burner. The old burner was pulled through the fiberglass protection and out of the oven. The new burner was inserted into the oven and the prongs were pushed through the fiberglass protection. The screws inside the oven were reattached. The clips were attached on the outside of the oven. The backing was slid into the right holding piece and the bolts on the left and bottom were attached.
Was this helpful?
Thank you for voting!
fried oven control using raid
4 of 13 people found this instruction helpful.
  • Kerry from Loveland, CO
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
replaced oven clock control ref maintenance manual, 4 screws and 8 wires. plugged in new control and op checks good.
Was this helpful?
Thank you for voting!
F2 error when oven was heating up, along with a beeping noise and then it shut off
0 of 1 people found this instruction helpful.
  • Lori from Paris, TN
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Unplugged oven, turned off breaker, took cover off back of oven, removed old sensor by disconnecting in back of oven and undoing screw inside oven. Pulled old one out replaced with new took 15min. Cost me less than $20. Parts Select rocks! Even received part in two days with standard shipping!
Was this helpful?
Thank you for voting!
The element started to spark and actually broke into two pieces.
0 of 1 people found this instruction helpful.
  • Joe from Austin, TX
  • Very Difficult
  • 15 - 30 mins
  • Nutdriver, Pliers
I have a GE Profile oven and the heating element on the bottom broke in two. I found the part on your website very easily. It was easy to see that I had the correct part. I ordered the new element and it came in about three days. I easily took off the old element, but I was really surprised because the new one didn't fit. The heating element itself was the correct size, but the holes didn't quite match up. As a matter of fact I had to take some tin snips and expand the hole at the back of the oven. That was the only hard part, but it was really difficult to lean in that far without putting too much weight on the door. Anyway, I opened the hole about an inch more, plugged it in, and now it works perfectly!
Was this helpful?
Thank you for voting!
All Instructions for the JCBP36DM1WW
121 - 135 of 241