- Home
- JCB560DF1WW
- Instructions
JCB560DF1WW General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
In My Carelessness, I Ruined The Burners On My Stove Using A Really Abrasive Cleaner, And Had To Replace Them With New Ones. My Stove Looks Brand New, And I Feel Better!!
3 of 4 people
found this instruction helpful.
-
Diane from Fraser, MI
- Really Easy
- Less than 15 mins
Nothing to it. Took off the old ones and put on the new! Tada - new stove!!
Other Parts Used:
Was this helpful?
Thank you for voting!
Replacement of old parts
3 of 4 people
found this instruction helpful.
-
Margaret from Norwalk, CT
- Really Easy
- Less than 15 mins
Fortunately there was no repair needed, just a replacement of old parts, but I was very pleased with the speed of delivery and the quality of the parts. I'm a happy customer.
Other Parts Used:
Was this helpful?
Thank you for voting!
drip pans had become old and burned out
3 of 4 people
found this instruction helpful.
-
aiden from philadelphia, PA
- Really Easy
- 30 - 60 mins
Took off the ring burners and the old drip pans . installed the new drip pans and the old burners took less than 3 minutes...so easy
Other Parts Used:
Was this helpful?
Thank you for voting!
burner not work
3 of 4 people
found this instruction helpful.
-
SILVIA from Midlothian, TX
- Really Easy
- 15 - 30 mins
-
Screw drivers
Fue muy facil desconectar primero la estufa despues quite los tornillos de la parte superior detras de la estufa, desconecte un cable del switch y lo conecte en el nuevo despues el siguiente hasta conectar todos los cables en el nuevo switch. Lo mejor es desconectar uno por uno para mo mesclar los cables , despues removi el switch de la e
... Read more
stufa y puse el nuevo , puse las partes de regreso y listo conecte la estufa t revise si funcionava el quemador y listo sin ningun problema.
Read less
Was this helpful?
Thank you for voting!
Drip pans on stove top burned black
3 of 4 people
found this instruction helpful.
-
Dan from Tucson, AZ
- Really Easy
- Less than 15 mins
I got tired of trying to find the right parts in the stores and decided to order them. Finally I have the drip pans that fit my range!
Other Parts Used:
Was this helpful?
Thank you for voting!
Drawer sticking and not operating smoothly
3 of 5 people
found this instruction helpful.
-
Bill from Philadelphia, PA
- Easy
- Less than 15 mins
-
Screw drivers
I was so sick of this drawer and I over heard a buddy telling a story about a website that you can get ANY piece for appliances. I take the drawer out, look up the website (partselect.com) look at the appliance diagram and find the missing piece. Order it, get it, install it. My wife thinks I'm a hero and I think I'm pretty cool too.
Was this helpful?
Thank you for voting!
oven would not get hot
2 of 2 people
found this instruction helpful.
-
Paul from GATE CITY, VA
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
ordered over the phone a new temp sensor. Un plug the oven, take off the back, open oven and unscrew the temp sensor, pull the sensor until the elec connector clip comes through so you can unclip the old sensor, clip on the new then pull the line back and re attach the sensor to the ovn. Plug in the oven.
Pretty simple, just hard t ... Read more o work inside the oven. I unclipped the sensor line outside the oven to make sure it would come apart first before I was working inside the oven.
Pretty simple, just hard t ... Read more o work inside the oven. I unclipped the sensor line outside the oven to make sure it would come apart first before I was working inside the oven.
Read less
Was this helpful?
Thank you for voting!
Surface burner stopped working & light indicator remained on
2 of 2 people
found this instruction helpful.
-
Cynthia from BALDWINSVILLE, NY
- Very Easy
- 15 - 30 mins
-
Screw drivers
It took my son very little time to install control switch. Using a screw driver he removed the back panel directly behind burner units & replaced the control switch. Very easy.
Was this helpful?
Thank you for voting!
Defective switch
2 of 2 people
found this instruction helpful.
-
Mary from EDENTON, NC
- Easy
- 15 - 30 mins
-
Screw drivers, Socket set
Replaced element control switches
Was this helpful?
Thank you for voting!
Terminal block connectors worn out wasn’t making a good connection with the stove top burner
2 of 2 people
found this instruction helpful.
-
Lance from HAHIRA, GA
- Really Easy
- 30 - 60 mins
-
Nutdriver
Cut 4 inch’s off the new terminal block wires then using my wire strippers stripped 1/2 inch off the ends , the old terminal block wires I stripped 1/2 inch at the ends using a wire nuts on both wires and electrical tape connected the terminal block to the stove plugged the new burner in and the burner worked 100%.
Was this helpful?
Thank you for voting!
Was burned out
2 of 2 people
found this instruction helpful.
-
BRINDIA from DOVER, TN
- Really Easy
- 30 - 60 mins
-
Screw drivers, Socket set
Took back off and replaced.
Was this helpful?
Thank you for voting!
front lift burner not working and surface light on with everything off
2 of 2 people
found this instruction helpful.
-
kevin from GAYLORD, MI
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
unplugged the range removed 4 screws from back top cover then took the knob off controller removed 2 screws from behind the knob removed 1 wirer at a time and placed it on the new controller in same order the wires came off put everything back to gather did not fix the problem .
Was this helpful?
Thank you for voting!
lights blown out
6 of 14 people
found this instruction helpful.
-
Gerald from WINTERVILLE, GA
- Very Easy
- Less than 15 mins
replaced lights in refrigirator and freezer
Was this helpful?
Thank you for voting!
Drawer support broke
2 of 2 people
found this instruction helpful.
-
Charles from BOULDER, WY
- Really Easy
- Less than 15 mins
-
Nutdriver
Remove drawer by pulling out and lifting up so drawer will slide out of range. Use 1/4 inch Nutdriver or socket - remove the screw that holds the drawer support to the body of the range. Remove support and install new one with screw Pay attention to the way the support fits. There are two holes one for the screw and the other for the plas
... Read more
tic prong on the bottom of the support. The prong fits in the bottom hole and the screw in the above hole.
Read less
Was this helpful?
Thank you for voting!
It was burned out
2 of 2 people
found this instruction helpful.
-
lan from SANTA CLARA, CA
- Really Easy
- Less than 15 mins
-
Socket set
I just follow Steve's Installation Vidio. My range works.
Thanks Steve
Thanks Steve
Was this helpful?
Thank you for voting!