EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JBV42G1H2 General Electric Range - Instructions

All Instructions for the JBV42G1H2
61 - 75 of 134

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
metal ends for connecting surface element to stove broke off in the outlet.
0 of 1 people found this instruction helpful.
  • Elaine from Framingham, MA
  • Really Easy
  • 15 - 30 mins
  • Pliers
disconnected electricity, used pinch pliers to remove broken ends from connection box and used an already existing element to make sure a new one would work at all. Ordered new one that arrived very quickly and replaced the broken one. After years of taking these in and out for cleaning by outside cleaning help they are bound to break off . I will do the gentle removal from now on.
Was this helpful?
Thank you for voting!
My heating element will not work
0 of 1 people found this instruction helpful.
  • Joseph from Guilford, NY
  • Easy
  • 15 - 30 mins
  • Screw drivers
I turned the power off to the stove (very important). then I unplugged the heating element from the terminal. I then unscrewed the terminal from the range top and pulled the terminal through to expose enough wire to do the job. I then proceeded to cut one wire from the old terminal and twist the new wire onto the wire that goes to the swi tch. Then I capped it off with the electric cap that came with the new terminal. then I covered the exposed wires with the sleeve that came with new terminal. Then I did the same exact thing for the second wire. After that was all done I put everything back together and turned the power back on.
Was this helpful?
Thank you for voting!
Range element working intermittently then failing completely
0 of 1 people found this instruction helpful.
  • David from Richmond, VT
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Remove the element and pan. Unscrew the bracket holding the old terminal. The terminal has adequate wire to pull out. Found area where insulation wasn't brittle. Cut old wires and stripped them to expose 1/2 inch of wire. Attached wires from new terminal with wire nuts. Placed heat-shrink tubing over each assembly and shrank it with a heat gun. Retained the bracket from the old terminal, since it looked like it would hold the terminal assembly a bit more firmly than the new bracket. Reassembled in reverse order. Presto -- once again disappointing my wife in her desire for new appliances!
Was this helpful?
Thank you for voting!
A teapot melted on one of two working burners
0 of 1 people found this instruction helpful.
  • Carolyn from Cincinnati, OH
  • Really Easy
  • Less than 15 mins
Pulled the old surface element out and plugged the new one in. Took all of 45 seconds!!!!!

It's nice to know that one can still get replacement parts for 50 year old stove tops!!!!
Was this helpful?
Thank you for voting!
burned-out six inch electric stove- top burner
0 of 1 people found this instruction helpful.
  • Harold from Gloversville, NY
  • Really Easy
  • Less than 15 mins
Removed the old and slipped in the new.No problem and it works fine.
Was this helpful?
Thank you for voting!
Electric stove 8" burner needed to be replaced
0 of 1 people found this instruction helpful.
  • LISA from GLENDALE, CA
  • Really Easy
  • Less than 15 mins
Installation took 30 seconds. Your website was easy to use & the part received was just as described. It arrived beautifully wrapped & in just a few days. ABSOLUTELY AWESOME!I will recommend your site to everyone.
Was this helpful?
Thank you for voting!
Burner heating coil element would not get hot.
0 of 1 people found this instruction helpful.
  • Jeannette from Haskell, NJ
  • Really Easy
  • Less than 15 mins
I pulled out the heating coil and pushed in the new coil. I turned the stove top on and heard a sound like "dzzzt". I immediately turned off the burner and waited for it to cool, then pulled it out. The part had a burn melt on one side of the end prong. It turns out that the part that the burner plugs into needs to be replaced. Actually, the stove top is over 20 years old and my landlord will have to replace the whole unit. So it turns out that I didn't need to order a surface element after all, but it was very easy to install!
Was this helpful?
Thank you for voting!
element broken at contact point
0 of 1 people found this instruction helpful.
  • MARLENE from EUGENE, OR
  • Really Easy
  • Less than 15 mins
ordered new surface element and pushed in to conector turned on switch to test and works fine thanks
Was this helpful?
Thank you for voting!
Plug-in surface element was covered with a melted on forever microwave plate
0 of 1 people found this instruction helpful.
  • Lois from Sarver, PA
  • Really Easy
  • Less than 15 mins
Just put it right into the receptacle. I want to add...we had gone to our local appliance store and brought home a wrong-size unit. Got online and your website came up. It was easy to find the correct part, ordered it and it arrived 3 days later. I have already recommended your website to 2 of my friends. One very good experience!!!
Was this helpful?
Thank you for voting!
Burner not working.
0 of 1 people found this instruction helpful.
  • Scott from Dallas, GA
  • Really Easy
  • Less than 15 mins
I pulled the old burner out and slid the new one in it's place. Turned on the eye to make sure it worked. Felt heat in a few seconds and turned off.
Was this helpful?
Thank you for voting!
I Ruined My Burner -- This Was A Solution For Me...
0 of 1 people found this instruction helpful.
  • DEBRA from DULUTH, MN
  • Really Easy
  • Less than 15 mins
I simply pushed the new burner into hardware. I then tested it to see if it works. . .
Was this helpful?
Thank you for voting!
Needed new electric element
0 of 1 people found this instruction helpful.
  • Barbara from Richmond, VA
  • Really Easy
  • Less than 15 mins
A breeze! Part was perfect replacement, snapped in place without tools, and heated almost immediately.
Was this helpful?
Thank you for voting!
Old trim rings were rusted and soiled
0 of 1 people found this instruction helpful.
  • Stephen from Bridgton, ME
  • Really Easy
  • Less than 15 mins
Too easy to describe. Just lifted out the old rings and popped in the new ones. PartSelect is my go-to source for appliance parts both for my home and my job as maintenance man for residential group homes in my area. Website is easy to use, prices are good, shipping is always surprisingly fast. Thank you.
Was this helpful?
Thank you for voting!
burned out surface element
0 of 1 people found this instruction helpful.
  • Eugene from Crescent City, CA
  • Really Easy
  • Less than 15 mins
simply by inserting new replacement into electrical socket ...very satisfied in new replacement price and quick delivery date Thank you
Was this helpful?
Thank you for voting!
Surface element didn't heat. Cracked.
0 of 1 people found this instruction helpful.
  • Darlene from New Berlin, WI
  • Really Easy
  • Less than 15 mins
I simply pulled out the old element. Plugged in
the replacement, which arrived very quickly, and
that was it. I couldn't believe that was all there
was to it. I really loved being able to order the
replacement part online. Intend to order more
replacement parts just to have my stovetop
looking like new ag ain.
Was this helpful?
Thank you for voting!
All Instructions for the JBV42G1H2
61 - 75 of 134