JBS262F3 General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The light inside the oven had burned out
3 of 7 people
found this instruction helpful.
-
Catherine from SEATTLE, WA
- Very Easy
- Less than 15 mins
0. As a safety precaution, unplug the range or hit the relevant fuse breaker before you start. You might also want to grab a flashlight. Definitely do not try to do this while the oven is hot.
1. Pinch the wire over the light bulb cap to remove it. This is inside the oven at the back.
2. Pop off the hemispherical glass cap.
... Read more />3. Unscrew the old light bulb, and screw the new light bulb in its place.
4. Put the cap back.
5. Secure the cap by putting the wire back in its slots on the cap.
No tools needed, the cap is just held in place with pressure from the wire.
1. Pinch the wire over the light bulb cap to remove it. This is inside the oven at the back.
2. Pop off the hemispherical glass cap.
... Read more />3. Unscrew the old light bulb, and screw the new light bulb in its place.
4. Put the cap back.
5. Secure the cap by putting the wire back in its slots on the cap.
No tools needed, the cap is just held in place with pressure from the wire.
Read less
Was this helpful?
Thank you for voting!
Bottom oven heating element was out
1 person
found this instruction helpful.
-
John from FALL RIVER, MA
- Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Very easy repair. 2 hex head screws to take the heating element out. Then 2 more slot head screws for the wire connections. Perfect fit and operation of the new heating element.
Was this helpful?
Thank you for voting!
I knocked the timer knob off of my 30 year old GE range and it broke so had to replace it.
1 person
found this instruction helpful.
-
NANCY from CARY, NC
- Very Easy
- Less than 15 mins
Simply put the new knob on and it worked perfectly. No tools needed. So glad to locate this website to purchase knobs that fit my range.
Was this helpful?
Thank you for voting!
Bake element burned out
1 person
found this instruction helpful.
-
Lavona from JACKSONVILLE, FL
- Very Easy
- Less than 15 mins
-
Screw drivers, Socket set
Flip the circuit breaker going to oven off, then used a 1/4 inch socket on the mounting flange bolts and the bolt head screws attaching the wires. Then used a flat head screwdriver to reattach the wires with the supplied screws and bolted the new element in place. Back to the circuit breaker flipped the switch and turned the oven on to te
... Read more
st it, and now works fine. *be sure to remove the sticker before installation, use rubbing alcohol to remove any residue.*
Read less
Was this helpful?
Thank you for voting!
Bottom Bake Element had burnt into/split
1 person
found this instruction helpful.
-
Miranda from UNION GROVE, NC
- Really Easy
- Less than 15 mins
-
Socket set
Very easy and simple/ After making sure power supply was off, removed socket screws in back plate of element, slid old element out, attached new element and replaced/tightened socket screws on plate and new element. Power on, oven on .. heated quickly and nicely. Used oven several times since ... no problems.
Was this helpful?
Thank you for voting!
Really old range. Broken bake element in oven.
1 person
found this instruction helpful.
-
Kathleen from Grand Rapids, MI
- Very Easy
- Less than 15 mins
Turned off power. Removed old broken one installed new one in minutes. Turned power on and tested it out. If this 60 something lady can do it, you can too.
Was this helpful?
Thank you for voting!
Bottom Element On The Top And Bottom Oven Burned Out
1 person
found this instruction helpful.
-
Tammy from McKinney, TX
- Really Easy
- 15 - 30 mins
-
Wrench set
Just like your example said/turn the power off to the oven/remove the screws that hold the element in place and then I pulled th element out a little ways and disconnected the wires/reconnecting took a little longer only because it was hard to see/but I connected the two wires and put the screws back in and it worked. Saved me a lot of m
... Read more
oney/my husband wanted to get a new double oven
Read less
Was this helpful?
Thank you for voting!
Bake element shorted and broke
1 person
found this instruction helpful.
-
David from Littleton, CO
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
TURN OFF CIRCUIT BREAKER before doing anything even if oven is not turned on! If I hadn't checked voltage with tester before starting I would have made a shocking discovery.
1) unscrewed shield cover to get get at the element screws.
2) unscrewed element screws and removed old element - pulling connecting wires out about 3 inch ... Read more es
3)attached new element to connecting wires (2 screws)
4) pushed new element into place and reattached element connector plate to wall of oven
5) reattached shield cover to wall of oven
1) unscrewed shield cover to get get at the element screws.
2) unscrewed element screws and removed old element - pulling connecting wires out about 3 inch ... Read more es
3)attached new element to connecting wires (2 screws)
4) pushed new element into place and reattached element connector plate to wall of oven
5) reattached shield cover to wall of oven
Read less
Was this helpful?
Thank you for voting!
The bottom oven heat element didn't work
1 person
found this instruction helpful.
-
Marilee from Newburgh, IN
- Easy
- 15 - 30 mins
-
Pliers, Socket set
1. Removed the old element. Had a little trouble loosening the screws. After we got them loose, everything was easy.
2. Pulled out the element and disconnected the wires.
3. Connected the wires on the new element.
4. Screwed the element back in.
5. Connected the stove and turned on the oven.
6. It works like a ne ... Read more w one.
2. Pulled out the element and disconnected the wires.
3. Connected the wires on the new element.
4. Screwed the element back in.
5. Connected the stove and turned on the oven.
6. It works like a ne ... Read more w one.
Read less
Was this helpful?
Thank you for voting!
Bottom Bake Element wouldn't heat
1 person
found this instruction helpful.
-
Kevin from Warminster, PA
- Easy
- 15 - 30 mins
-
Socket set
First I turned the Breaker off for the Oven. I removed the two screws that hold the element/cover plate. I pulled the element out to get access to wires attached to element & removed screws holding wires to element. I reversed the process to put back together.
Was this helpful?
Thank you for voting!
Element cracked
1 person
found this instruction helpful.
-
Linda from Manassas, VA
- Easy
- 15 - 30 mins
-
Nutdriver
The repair was fairly easy. Removed the 2 screws that hold the plate to the oven and then pulled out the element and loosen up the screws that connect it. Installed the new element and re-attached the element to the plate and secured the plate back to the oven. This site was very easy to use and very helpful and I will use it again if I n
... Read more
eed another part.
Read less
Was this helpful?
Thank you for voting!
Bake element burned out due to age
1 person
found this instruction helpful.
-
Douglas Minich from South Windsor, CT
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Shut off the power at the circuit breaker, removed the two nuts holding the element to the oven, unscrewed the two screws connected to the wire leads, removed the bad element and reversed the process to replace with the new one.
Was this helpful?
Thank you for voting!
Baking element no longer worked.
1 person
found this instruction helpful.
-
Stanley from Cave Creek, AZ
- Really Easy
- 15 - 30 mins
-
Nutdriver
Removed 4 screw nuts and replaced with new baking element using same 4 screw nuts. Real easy job.
Was this helpful?
Thank you for voting!
The bake element burned in half.
1 person
found this instruction helpful.
-
RICHARD from BETHLEHEM, PA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
First I turned the power off to the oven/stove at the breaker box in the basement. Then I took the back plate off. Then I removed the two screws holding the wires onto the damaged element. Then I removed the two screws holding the element to the inside rear of the oven. Then I pulled the old element out and replaced it with the new elemen
... Read more
t. I replaced the two screws that hold the element to the inside of the oven. Then I replaced the wires on the element where it protruded at the back of the oven. I put the back plate back on, slide the oven back in place and turned the power back on at the breaker and everything worked.
Read less
Was this helpful?
Thank you for voting!
Bake element burnt out
1 person
found this instruction helpful.
-
David from West Union, AL
- Easy
- 15 - 30 mins
-
Nutdriver
Firs I shut the power off to the range. Then I removed the bottom oven rack, then removed the two screws holding the element in place. I pulled the element out about 3 inches to pull the connecting wires off. However, when I pulled the element towards me a lost on of the connecting wires that attached to the element. I then had to pull th
... Read more
e range away from the wall and remove the back cover panel.I then fed the new element into the wholes from the inside of the range and having the back panel removed gave me full access for reconnecting the element wires. I put the back cover panel into place , put the bottom oven rack in and that was it. I was done with the repair. I turned the power back on and everything worked fine. I would recommend removing the back cover panel prior to trying to remove the element. This will save you some time and give you full access to the wiring before attempting to remove the bake element.
Read less
Was this helpful?
Thank you for voting!