EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JBS07V2 General Electric Range - Instructions

All Instructions for the JBS07V2
91 - 105 of 447

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bake element burned up
1 person found this instruction helpful.
  • Fran from Goldsboro, NC
  • Really Easy
  • Less than 15 mins
  • Wrench (Adjustable)
This was extremely easy to replace. When I told my mom I would replace it for her, she thought I was crazy. When she saw how easy it was, she finally understood. I had to remove the two screws holding the element in place. I pulled it out about 3 inches and unscrewed one screw for one wire. I didn't want to lose the wire, so I immedi ately connected the wire to the new element. I disconnected the second wire and attached it to the new bake element. Then attached the two screws putting the plate back up, securing the element. So easy! Just unscrewing and replacing 4 screws and I was done!! Took less than 10 minutes. I didn't have any real tools available, so I used a small adjustable wrench and it worked fine. The best part was it was so easy we were able to have a working oven in time for Thanksgiving!
Was this helpful?
Thank you for voting!
The bottom element in my oven quit working.
1 person found this instruction helpful.
  • Suzanne from Burlington, NC
  • Really Easy
  • Less than 15 mins
  • Socket set
Pulled out the bottom drawer of the stove and discovered the plug. So the plug was pulled from the wall socket.

Before this I had sprayed the screws with WD-40 and let it sit for 2 days.

Screws came out easily. Pulled out the old element and removed screws. Screwed on new element on both sides. Put in place and put old screws back.

Plugged stove back in. Turned on stove. Element came right on.
Was this helpful?
Thank you for voting!
old wore out parts
1 person found this instruction helpful.
  • Bobby from Trinity, TX
  • Really Easy
  • Less than 15 mins
just put in the new part
Was this helpful?
Thank you for voting!
Original element stopped working
1 person found this instruction helpful.
  • Brian from Clayton, DE
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires...I copy and pasted this from their example - it really is that easy - this is a simple repair.
Was this helpful?
Thank you for voting!
The Bake Element broke and when powered on it started to spark and flame.
1 person found this instruction helpful.
  • Phillip from Cary, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Socket set
First I read the already posted repair stories to give me confidence I could perform the repair.
Followed their steps -
Removed the two screws holding the plate to the oven.
Pulled out the element.
Removed the two screws holding the wires to the element.
Installed the new element by attaching the two screws (which were supplied) to the element.
Reinstalled the plate to the oven.
Tested it and it worked perfectly saving a costly service call.
Was this helpful?
Thank you for voting!
rusted out drip pan
1 person found this instruction helpful.
  • Brenda L from Naples, NY
  • Really Easy
  • Less than 15 mins
unplugged the element took the old pan out and put the new one in, plugged the element back in.
Was this helpful?
Thank you for voting!
The lower heating elemen went out. It looked like a welding rod
1 person found this instruction helpful.
  • Scott from Tekoa, WA
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
It was so easy. Just removed the cover and then unscrewed the wires (keep track of which wires go to which side). Do teh reverse to reinstall
Was this helpful?
Thank you for voting!
Oven wouldn't heat, bake element burned out.
1 person found this instruction helpful.
  • Russ from Chimacum, WA
  • Really Easy
  • Less than 15 mins
  • Socket set
Repair was as easy as one, two three. Turned off the power and removed the two screws holding the element in place. Then pulled the element out approx. 3 inches and removed the two screws connecting the wires to the element.

From there I reversed the process and the repair was complete in less then 5 minutes, and I am not a el ectrician.
Was this helpful?
Thank you for voting!
Lower (bake) element burned out
1 person found this instruction helpful.
  • gary from Broken Arrow, OK
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Two 1/4" srews to remove the element from its mount, two 1/4" screws to remove wires and then the reverse to install new unit. Delivery was super fast and the price was half the price of the local dealers. I will certainly be a repeat customer.
Gary T.
Was this helpful?
Thank you for voting!
No heat from bake element
1 person found this instruction helpful.
  • Roberta from Southampton, NJ
  • Really Easy
  • Less than 15 mins
  • Socket set
Ordered part, took old bake element out, installed new bake element. It was real easy.
Was this helpful?
Thank you for voting!
Bottom element in oven caught on fire and broke in two
1 person found this instruction helpful.
  • SHERYL from VERO BEACH, FL
  • Easy
  • 15 - 30 mins
  • Nutdriver
The element was 25 years old and I was concerned about changing it. But is was so easy. I turned off power and removed 2 screws and then unscrewed the wiring from the old element. I had the new one installed in minutes. I was so glad to have my oven working again. Who needs a man.
Was this helpful?
Thank you for voting!
Bottom Element On The Top And Bottom Oven Burned Out
1 person found this instruction helpful.
  • Tammy from McKinney, TX
  • Really Easy
  • 15 - 30 mins
  • Wrench set
Just like your example said/turn the power off to the oven/remove the screws that hold the element in place and then I pulled th element out a little ways and disconnected the wires/reconnecting took a little longer only because it was hard to see/but I connected the two wires and put the screws back in and it worked. Saved me a lot of m oney/my husband wanted to get a new double oven
Was this helpful?
Thank you for voting!
Bottom Bake Element wouldn't heat
1 person found this instruction helpful.
  • Kevin from Warminster, PA
  • Easy
  • 15 - 30 mins
  • Socket set
First I turned the Breaker off for the Oven. I removed the two screws that hold the element/cover plate. I pulled the element out to get access to wires attached to element & removed screws holding wires to element. I reversed the process to put back together.
Was this helpful?
Thank you for voting!
Element cracked
1 person found this instruction helpful.
  • Linda from Manassas, VA
  • Easy
  • 15 - 30 mins
  • Nutdriver
The repair was fairly easy. Removed the 2 screws that hold the plate to the oven and then pulled out the element and loosen up the screws that connect it. Installed the new element and re-attached the element to the plate and secured the plate back to the oven. This site was very easy to use and very helpful and I will use it again if I n eed another part.
Was this helpful?
Thank you for voting!
Bake element burned out due to age
1 person found this instruction helpful.
  • Douglas Minich from South Windsor, CT
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Shut off the power at the circuit breaker, removed the two nuts holding the element to the oven, unscrewed the two screws connected to the wire leads, removed the bad element and reversed the process to replace with the new one.
Was this helpful?
Thank you for voting!
All Instructions for the JBS07V2
91 - 105 of 447