EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JBS034V1 General Electric Range - Instructions

All Instructions for the JBS034V1
76 - 90 of 439

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The Bake Element broke and when powered on it started to spark and flame.
1 person found this instruction helpful.
  • Phillip from Cary, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Socket set
First I read the already posted repair stories to give me confidence I could perform the repair.
Followed their steps -
Removed the two screws holding the plate to the oven.
Pulled out the element.
Removed the two screws holding the wires to the element.
Installed the new element by attaching the two screws (which were supplied) to the element.
Reinstalled the plate to the oven.
Tested it and it worked perfectly saving a costly service call.
Was this helpful?
Thank you for voting!
rusted out drip pan
1 person found this instruction helpful.
  • Brenda L from Naples, NY
  • Really Easy
  • Less than 15 mins
unplugged the element took the old pan out and put the new one in, plugged the element back in.
Was this helpful?
Thank you for voting!
The lower heating elemen went out. It looked like a welding rod
1 person found this instruction helpful.
  • Scott from Tekoa, WA
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
It was so easy. Just removed the cover and then unscrewed the wires (keep track of which wires go to which side). Do teh reverse to reinstall
Was this helpful?
Thank you for voting!
Oven wouldn't heat, bake element burned out.
1 person found this instruction helpful.
  • Russ from Chimacum, WA
  • Really Easy
  • Less than 15 mins
  • Socket set
Repair was as easy as one, two three. Turned off the power and removed the two screws holding the element in place. Then pulled the element out approx. 3 inches and removed the two screws connecting the wires to the element.

From there I reversed the process and the repair was complete in less then 5 minutes, and I am not a el ectrician.
Was this helpful?
Thank you for voting!
element went out on oven
1 person found this instruction helpful.
  • Brian from Deer Park, TX
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Pliers
Made sure oven was turned off. I used nut driver to remove nuts holding old element to back of oven. gently pulled element out of wall, taking care not to yank because of wires attached to back of element. Made sure oven was off again and then used nut driver to carefully remove wire leads from receptors on element. removed old elemen t from oven and got the new element. carefully used nut driver to attach wire leads to new element. When snugging the bolts to leads, used pliers to keep leads on the element from bending. carefully replaced wires and rear of element into the space behind oven, and used nut driver to attach the back of element to the back of oven. shut oven and turned on to make sure it worked. it did. I was very pleased with my experience with part select dot com, and will be buying another element soon to replace the one in my other oven! Thank you
Was this helpful?
Thank you for voting!
Took forever to preheat
1 person found this instruction helpful.
  • Terri from Edgewater, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Socket set
When I told my husband I ordered the part and was going to fix it myself, he laughed and said I might not have ordered the right part for the problem and I should just buy a new stove.
The part was delivered the day before Christmas, just 3 days after I placed the order! I had read the stories of others fixing theirs and gave it a shot. It took me longer to find the tools then it did to replace the element!
I took the screws out , pulled the element toward me and disconnected the wires. Put it back the way I found it. Oven heated up in less then 5 minutes!
Was this helpful?
Thank you for voting!
No heat on bake.
1 person found this instruction helpful.
  • Marian from Inglis, FL
  • Really Easy
  • Less than 15 mins
  • Nutdriver
The first thing I did wrong was order the wrong part. Then later I did find the Model number on the side of the bottom drawer. I reordered the right part and turned off the electrical breaker. Removed the old element. I then installed the element in the oven with 2 screw nuts and pulled out the stove, took off the back panel and slipped the wire nuts onto the element. Very simple. I am really thankful there is a place to order the part and it came the next day after I ordered it. WHOW!
Was this helpful?
Thank you for voting!
Lower (bake) element burned out
1 person found this instruction helpful.
  • gary from Broken Arrow, OK
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Two 1/4" srews to remove the element from its mount, two 1/4" screws to remove wires and then the reverse to install new unit. Delivery was super fast and the price was half the price of the local dealers. I will certainly be a repeat customer.
Gary T.
Was this helpful?
Thank you for voting!
Oven heating element failed
1 person found this instruction helpful.
  • megrew, from COLORADO SPGS, CO
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Identify oven breaker and turn off power before starting. Opened oven door. Removed oven racks. Use 1/4" socket or nut driver to remove the 2 bolts holding heating element mounting bracket at rear base of oven. Carefully pull element out of installation mount to remove the 2 machine screws that attach electrical wires to the heating eleme nt. Reattach wires in same order as original element. Then reinstall new element in reverse order of removal. Took all of maybe 15 minutes! Excellent OEM Parts!
Was this helpful?
Thank you for voting!
bake element no heat
1 person found this instruction helpful.
  • larry from buckhannon, WV
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
took old element out , put new element in.very easy.
Was this helpful?
Thank you for voting!
Bake element burned out
1 person found this instruction helpful.
  • Lavona from JACKSONVILLE, FL
  • Very Easy
  • Less than 15 mins
  • Screw drivers, Socket set
Flip the circuit breaker going to oven off, then used a 1/4 inch socket on the mounting flange bolts and the bolt head screws attaching the wires. Then used a flat head screwdriver to reattach the wires with the supplied screws and bolted the new element in place. Back to the circuit breaker flipped the switch and turned the oven on to te st it, and now works fine. *be sure to remove the sticker before installation, use rubbing alcohol to remove any residue.*
Was this helpful?
Thank you for voting!
broken heating element
1 person found this instruction helpful.
  • Sherry from BLUFFTON, SC
  • Very Easy
  • Less than 15 mins
remove broken heating element and install the new one
Was this helpful?
Thank you for voting!
Bottom oven heating element was out
1 person found this instruction helpful.
  • John from FALL RIVER, MA
  • Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Very easy repair. 2 hex head screws to take the heating element out. Then 2 more slot head screws for the wire connections. Perfect fit and operation of the new heating element.
Was this helpful?
Thank you for voting!
Really old range. Broken bake element in oven.
1 person found this instruction helpful.
  • Kathleen from Grand Rapids, MI
  • Very Easy
  • Less than 15 mins
Turned off power. Removed old broken one installed new one in minutes. Turned power on and tested it out. If this 60 something lady can do it, you can too.
Was this helpful?
Thank you for voting!
Bottom Bake Element had burnt into/split
1 person found this instruction helpful.
  • Miranda from UNION GROVE, NC
  • Really Easy
  • Less than 15 mins
  • Socket set
Very easy and simple/ After making sure power supply was off, removed socket screws in back plate of element, slid old element out, attached new element and replaced/tightened socket screws on plate and new element. Power on, oven on .. heated quickly and nicely. Used oven several times since ... no problems.
Was this helpful?
Thank you for voting!
All Instructions for the JBS034V1
76 - 90 of 439