EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JBS034V1 General Electric Range - Instructions

All Instructions for the JBS034V1
46 - 60 of 439

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The original drip pans had rusted and needed replacement.
2 of 3 people found this instruction helpful.
  • Sandy from Olney, MD
  • Really Easy
  • Less than 15 mins
We tried to find the replacement pans at the local hardware store and were disappointed in that although they were cheaper, they were not deep enough to handle the heating elements. We were delighted to find that the parts from PartSelect.Com were genuine GE parts... installed in minutes and were delivered VERY quickly!
Was this helpful?
Thank you for voting!
Melted plastic colander on a burner
2 of 3 people found this instruction helpful.
  • Paula from Dyersburg, TN
  • Really Easy
  • Less than 15 mins
I simply replaced the element. HOWEVER, the most wonderful parts of this repair...Because of the pictures and closeups and descriptions I knew exactly 'what' to order! And I had the replacement in less than 24 hours. I can do some home repairs but this company provided such detailed information AND speed of delivery...that this was a no-f uss fix. I'll definitely stop by to buy, again. Thanks!
Was this helpful?
Thank you for voting!
the drip bowls were a mess- rusty and beyond cleaning
3 of 6 people found this instruction helpful.
  • Suzanne from Brigthon, MI
  • Really Easy
  • Less than 15 mins
I removed the old drip pans, cleaned the range top, washed and installed the new drip pans and put the old pans, box and packing materials in the trash. In only 12 minutes my range top looked like new and the mess was picked up. Now, if I could just get the rest of the kitchen looking that good that fast!
Was this helpful?
Thank you for voting!
Oven Heating element broken
2 of 3 people found this instruction helpful.
  • James from Hanover, MA
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Turned off power to the oven at the circuit breaker. Pulled the old heating element from the back lower wall of the oven. Noted the position of the wires (right terminal attached to the red wire, left to the black wire). Removed small bolts holding the element to the wires using pliers. Attached the new element using screw driver. New ele ment came with screws, not bolts. Pushed the element back into place and restored power. Tested to make sure everything worked. Everything works and I ran an oven cleaning cycle. Noticed that indicator light above the temperature selctor is always on now even when oven is in the OFF position. Not sure if that's related to the change or to the oven cleaning cycle I ran. In any case, oven seems to work normally.
Was this helpful?
Thank you for voting!
element burned out
2 of 3 people found this instruction helpful.
  • Jeff from Westport, IN
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Took off the door, took out the two screws in the back of the element. Then pulled the element forward, then removed the two wires. Then put it all back together with the new element.
Was this helpful?
Thank you for voting!
Replacing the bake element
1 person found this instruction helpful.
  • Ken from Lexington, KY
  • Really Easy
  • Less than 15 mins
  • Pliers
I couldn't find the oven model number so I just looked at the shapes from partselect.com. This would have been fine except I didn't know my Kenmore model had 4" leads so the one I ordered were only 2". I had to return the first element but the process to do this was FAST and EASY. With help I found the model number and had the correct par t shipped. It took less than 5 minutes to install. It took longer to mop and clean behind the oven that hadn't seen the light of day in 10 years.
Was this helpful?
Thank you for voting!
Baking Element shorted out and burnt
1 person found this instruction helpful.
  • George from Gahanna, OH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I loosened two screws that held the baking element to the stove and pulled out. Then, with a screwdriver , I took the old wires off and replaced them onto the new Baking Element and reassembled.

It was a very easy task and while I was at it,I replaced the Drip Bowl pans on the top of the stove with Chrome ones.

I ord ered the parts on a Tuesday and, to my surprise, I received them on Thursday, and the cost was about half of what it would have cost me elsewhere (to include GE Parts Warehouse)

I highly recommend partselect to all of you that need inexpensive repairs.
Was this helpful?
Thank you for voting!
Shorted out the burner... fat gets into the receptors on these old stoves.
1 person found this instruction helpful.
  • Todd from Mountain View, CA
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
The only hard part about putting in a new terminal block (and this time I had to replace the burner too, because that fried too) is stripping the stove wires, because that thermal insulation is very hard to get off. Otherwise, it's simple. In this case, I had already replaced this one (sigh), so had already cut & stripped the wires, so it was all easy. Frankly, the sane thing to do is buy a new stove, but wife is too cheap.
Was this helpful?
Thank you for voting!
drip ban needed replacing
1 person found this instruction helpful.
  • Angelo from Phoenix, AZ
  • Really Easy
  • Less than 15 mins
removed heating element,removed old drip pan.added new drip pan,replaced heating element.Took less that 3 min.
Was this helpful?
Thank you for voting!
Lower baking element had burned out.
1 person found this instruction helpful.
  • Rob from Las Cruces, NM
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Using a nut driver, I removed the two screws holding the baking element to the firewall of the oven. I then pulled the baking element out exposing the two wires connected to it. I then used the same nutdriver to remove the nuts and detached the old element. I then connected the new element to the wires, pushed the wires inside the firewal l and reattached the element to the firewall of the oven.
The time it took was literally a few minutes. Works like a new oven!
Was this helpful?
Thank you for voting!
Baking element had burned out and actually cracked in half.
1 person found this instruction helpful.
  • Marie from Roxboro, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Socket set
It was so simple, I turned off the breker to the oven, unscrewed two screws holding in the element, pulled out until the wire connetion was exposed. I unscrewed those two screws, then placed the replacement part, put the two screws on, pushed back the wiring and insulation.Final step was screwing two screws to hold the unit to the oven ba ck. So simple! The part was ordered regular mail and still was here in 2 days. Will recommend to friends for sure!
Was this helpful?
Thank you for voting!
Bake Element Burnt Out On Upper Oven
1 person found this instruction helpful.
  • GREGORY from HOUSTON, TX
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Unscrewed the element from the oven,disconnected the two screws for the electrical and reverse the procedure to install new element. Took all of about 10 minutes.
Was this helpful?
Thank you for voting!
oven wouldn't heat because coil had burned through
1 person found this instruction helpful.
  • Carolyn from Harvard, MA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The part was delivered in 24 hours with regular
shipping and was simple to replace. Uncrewed
it, disconnected wires from the old one and connected
the new one. Cost a little more than $30 including shipping and the oven works great!
Was this helpful?
Thank you for voting!
Baking element went out
1 person found this instruction helpful.
  • Shannon from Birmingham, AL
  • Really Easy
  • Less than 15 mins
  • Pliers
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. Removed the old piece and connected the wires to the new piece. I'm a woman and this took me less that 15 minutes to complete. Easy as pie. On top of that, I received my order within 3 days! Very impressive, PartSelect. Thanks.
Was this helpful?
Thank you for voting!
lower heating element wasn't working
1 person found this instruction helpful.
  • Kelli from Moyock, NC
  • Really Easy
  • Less than 15 mins
  • Wrench (Adjustable)
I turned off the electricity, unscrewed the old one and disconnected the electric wires, then put the new one in just like the old one. It was very easy and now it works great.
Was this helpful?
Thank you for voting!
All Instructions for the JBS034V1
46 - 60 of 439