HTW200ASK0WW Hotpoint Washer - Parts

This lid lock, also known as a door lock, is a genuine OEM replacement part for your washing machine. The lid lock keeps your washer lid closed during the washing cycle. If this part is broken, your washer may not run because it thinks the door is open, or it will not keep the door locked during the wash cycle. To replace this part, make sure you disconnect power to the appliance and wear work gloves.

This drain pump assembly is for washers. Drain pump assembly removes water from the washer during the drain portion of the cycle. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included.

This is a mode shifter or shift actuator for models of washing machine. Mode shifters are designed to change the function of the washing machine motor, between spinning cycles and agitation, and is usually installed at the bottom of the washer. If your washing machine is not spinning or agitating during its washing cycle, or if it simply ...Read moredoes not start, this shift actuator is likely bad and in need of replacing. This shift actuator is made mostly of plastic, and features two holes to secure it with screws, as well as a single wire harness that connects within your washing machine. This shifter is an OEM part and is sold individually.

This is a clutch for your washing machine. The clutch is made of a white plastic material and is used within washing machines to engage and disengage the transmission during the wash and spin cycles, and ultimately help spin the basket of the tub so your clothes finish damp and not soaked. If your washer has issues with spinning or agitat...Read moreing, this part is likely broken or has worn out, and will need to be replaced. To replace this part, some disassembly of your washer will be required, and tools like a screwdriver and socket wrench will be needed. This clutch is sold as an individual and does not come with any other parts.

This drive belt is an authentic OEM part that is compatible with various models of washing machine. The drive belt is responsible for allowing the drum to rotate smoothly during the wash and spin cycles, as well as driving the pump to drain water from the machine. If the drive belt becomes worn, stretched, or damaged, it can cause issues ...Read moresuch as the drum not spinning or the machine not draining properly. Your washer may also become excessively noisy during use. If the belt is faulty, it will need to be replaced to restore your washer.

This is an agitator assembly for washing machines. Agitators are used within top load washing machines to move back and forth and effectively wash your clothes. However, if the agitator currently in your washing machine is damaged and/or worn out, it needs to be replaced for your washing machine to operate properly. Replacing this agitato...Read morer assembly will require a wrench, and for you to turn off the power and water supply for your washing machine. This agitator assembly is an OEM part that is sold individually and does not come with any other parts or accessories.

This is a water inlet valve; an electrically controlled solenoid valve that opens and closes when necessary, to control the flow of water into your washing machine during the washing cycle. This part features two different valves, one for cold and one for warm water. If your washer is having difficulty filling up properly or is not fillin...Read moreg up at all, the inlet valves may be bad and not opening to allow water in, meaning the valve needs replacing. Replacing water inlet valves will require some disassembly of your washing machine, so a screwdriver, socket wrench, and other tools will be necessary. This water inlet valve is sold individually, and does not come with any other parts or accessories.

This lid lock bezel, also known as a trim piece, is a genuine OEM part designed for washing machines. It is approximately 3.5 inches long. The bezel is a white, plastic frame that fits around the perimiter of the lid lock. It features an open slot where the locking mechanism engages. The bezel ensures that the lid lock remains securely in...Read more place and that the locking mechanism functions correctly. If the bezel is damaged or faulty, the lid lock mechanism will be left exposed and vulnerable to damage. You may also notice that the lid lock is loose or unstable, and the door may not lock properly.

This is a speed sensor for a variety of washing machine models. Speed sensors are used to monitor the speed of the washer drum and communicate it to the electronic control board to slow or quicken it. If this speed sensor is damaged or bad, it will cause your washer drum to rotate too quickly, slowly, or inconsistently. Replacing this sen...Read moresor will require a screwdriver and some minor disassembly of your washing machine. This sensor is an OEM part and is sold individually, so it does not come with any other parts or accessories.

Introducing the GE Spring Clutch, a crucial component for your washer. This intricate item applies steadfast pressure against the shifter hub, dutifully holding it in place for uninterrupted operation. For safe and accurate installation, remember to unplug your washer and wear work gloves to guard your hands. As a member of the renowned G...Read moreE lineage, this spring clutch offers consistent quality and performance. Enhance your washer's functionality today with the GE Spring Clutch.

Maintain stability and reduce operational noise in your washing machine with this right-side suspension rod and spring assembly, designed for select GE models. This component supports the wash tub and absorbs shock during cycles, particularly during high-speed spins, helping to prevent excessive vibration and unbalanced loads. Constructed...Read more for durability and precision, the assembly contributes to smoother performance and extends the life of your appliance. Installation involves securing the rod to the designated mounting points and ensuring proper tension. Color may vary by model, so visual confirmation is recommended. Always verify compatibility with your washer’s model number before installation.