EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

HTT16BBSERWW Hotpoint Refrigerator - Instructions

All Instructions for the HTT16BBSERWW
106 - 120 of 351

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The freezer just cool but could not freeze the water and the front of door is quite hot to touch.
2 of 2 people found this instruction helpful.
  • Fred from FLUSHING, NY
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
First I observe that the compressor motor is running since the freezer is cooling. The purchase of the condenser fan is initiated and when the part arrive it is just easy to reinstall the replacement condenser fan.

The problem on the front of the freezer door remains hot to touch and the compressor runs for a while and stop. The freezer is cold but still could not freeze the water. Inspection of the condenser fan reveals that it is not running. The order for the condenser fan from PARTSELECT came in a few days. Cleaning of the condenser of lint was first done and the process of removing the defective fan is just easy so with the installation.

The refrigerator as of now is running in perfect condition!
Was this helpful?
Thank you for voting!
Broken crisper drawer cover
2 of 2 people found this instruction helpful.
  • Wanda from HOUSTON, TX
  • Very Easy
  • Less than 15 mins
After removing all items from the broken top, I removed both drawers and crisper top. I then slid the new top in place and replaced the drawers which easily slid into the grooves in the underside of the top.
Was this helpful?
Thank you for voting!
Freezer is too hot
4 of 8 people found this instruction helpful.
  • David from New York, NY
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Open the freezer panel which attached with screwws and locate the defrost thermmostate behind the back pannel. Cut off the old thermostat wires and connect the new wires.
Was this helpful?
Thank you for voting!
Freezer was wet and there was no air coming out of the freezer fan. Unit was very noisy too.
2 of 2 people found this instruction helpful.
  • Robert from BOULDER, CO
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers, Socket set
The video that was attached to the part order was good, but not exactly the same as my unit. One thing I recommend is that you cover up the drain below the evaporator coil with a piece of paper and tape it down, because as I was putting the motor back I dropped a screw and it fell down the drain. So I had to go buy a new screw.
Gi ve the cost of a repair man coming to fix a refrigerator that cost only $450 to begin with, doing this repair was well worth my time. (But I also had another refrigerator to move things to and could take my time and wait while they replaced the faulty part they shipped me.)
Was this helpful?
Thank you for voting!
There was frequently a loud buzzing sound that would come from the freezer.
2 of 2 people found this instruction helpful.
  • Jeffrey from SIOUX FALLS, SD
  • Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
I wouldn't have tried it without the excellent YouTube video that gave step-by-step instructions! I set up a laptop next to the refrigerator and watched each step then did it myself.

The instructions were very detailed and all of the parts looked exactly like what I was seeing. The only difference was that I didn't need to re move the floor of the freezer to get to the fan motor.

I bought the fan motor, grommets (2), compression ring and fan blade because I wasn't sure which part was causing the problem, and figured that as long as I was in there I might as well put in all new parts.

As it turned out, I did not need the compression ring, because the new fan blade came with a compression ring on it. This was different from what was shown in the video.

Since doing the repair the freezer is now as quiet as it should be, which is a great relief. The project and the money spent were more than worth it. It was great not having to pay a repair man to do the work!
Was this helpful?
Thank you for voting!
The fan got very noisy.
2 of 2 people found this instruction helpful.
  • Carol from ORANGE, CA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
My husband did the repair in 45 minutes and said it was very easy. The video made everything plain and simple.
Was this helpful?
Thank you for voting!
Cracked shelf rails
2 of 2 people found this instruction helpful.
  • Scott from COLORADO SPGS, CO
  • Very Easy
  • 30 - 60 mins
Removed the cracked rails in the door and snapped the new ones into place.
Was this helpful?
Thank you for voting!
Defroster fan burned up
3 of 6 people found this instruction helpful.
  • Peter M. from Lincoln Park, NJ
  • Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers, Socket set
First I removed the ice tray rack lifting it out of the way to reach the back cover of the fan. Then, the whole back inside panel had to be removed. Two screws removed the fan and bracket from the freezer unit. The missing bumper lid just snapped into place. Replaced everything in reverse order. Pretty easy job.
Was this helpful?
Thank you for voting!
Old fan motor was knocking and not running well
2 of 3 people found this instruction helpful.
  • Jacky from Richland, GA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
Watched your repair video online. appeared very simple and straight forward. Order the parts in question. They were shipped quickly. Once parts in hand watched video again and then installed new motor and blade in less than ten minutes. Plug power back in and and new part works perfectly. Thanks for helping make it an easy process. J . Smith
Was this helpful?
Thank you for voting!
Light out
2 of 3 people found this instruction helpful.
  • Jodi from Benton Harbor, MI
  • Very Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Turned off the breaker to the fridge because I couldn't reach the power plug to unplug it . Use small flat head screwdriver to pop out the piece, disconnected the rubber prong connectors, inserted the new piece into the rubber prongs snapped it back into place. Flipped the breaker back on and prayed it worked. It did and I saved myself $ 120 service call.
Was this helpful?
Thank you for voting!
Fridge making LOUD humming sound.
2 of 3 people found this instruction helpful.
  • jack from homestead, FL
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Started removing screws until I got to the fan (it's easy). Then just took out the old fan and put the new one back in the same way. The only challenging part was putting the clamp back on the fan, but I finally got it. The fridge is finally quiet and we can sleep again! PartSelect made it really easy and they were incredibly fast. Than ks!
Was this helpful?
Thank you for voting!
the condenser fan motor was intermittently verynoisy. obvious sign of a (possibly imminent) failure
2 of 3 people found this instruction helpful.
  • Herbert from POCONO LAKE, PA
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
1 unplug the appliance
2. remove the rear cardboard cover, giving access to the compressor and condenser area
3. remove the two (condenser motor bracket) mounting screws, then with the motor assembly in your hand remove the the fan blade which is friction mounted to the motor shaft( note the exact position of the fan blade on t he motor shaft so you can replace it in the same position when you reassemble), remove the two wires connected to the motor. Also remove the rubber resilient mounting grommets on the motor mount frame as these can harden with age and cause excessive vibration.
4 install the new motor into the mounting frame with the new grommets
5 reconnect the two wires to the new motor (non polarized)
6 secure the mounting frame (with the installed new motor) back in place
7 slide the fan blade onto the new motor shaft
8 screw the rear access panel back in place
plug in the refrigerator. the next time the compressor and condenser fan cycle on, verify operation of the new condenser fan motor
Was this helpful?
Thank you for voting!
Light would no longer turn on
3 of 6 people found this instruction helpful.
  • paypal_shipping_address from Ripon, CA
  • Really Easy
  • Less than 15 mins
  • Pliers
I watched the video online, followed the instructions and within minutes had the part installed. The frig light was working once again! I will say the original switch was very snug and I had to do some very minor scraping of the plastic to get the new part to slide in.
Was this helpful?
Thank you for voting!
Huge crack in the vegetable pan cover
2 of 3 people found this instruction helpful.
  • Stephanie from Conshohocken, PA
  • Really Easy
  • Less than 15 mins
First, I love that fact that my new fridge piece came in the mail in 2 days! I didn't order it as a rush, but I'm so glad it came so quickly! The installation could not have been easier! It took me longer to clear off my broken vegetable pan cover than it did to pop the new one in. My overall experience was amazing and super easy! I'll be back to PartSelect should I need I need to replace anything else in the future.
Was this helpful?
Thank you for voting!
Noise in the back of freezer
3 of 6 people found this instruction helpful.
  • MaryLou from Levittown, NY
  • A Bit Difficult
  • Less than 15 mins
I must thank yo for sending the fan so fast. If I ever have to deal with any appliance again, you are first on my list.
Was this helpful?
Thank you for voting!
All Instructions for the HTT16BBSERWW
106 - 120 of 351