My Orders
- Home
- GMB228JSAA
- Instructions
GMB228JSAA (ASTCLGY) LG Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Cracked Support Bracket Would Not Allow Smooth Sliding Of Vegetable Tray.
-
Jerry from Boise, ID
- Really Easy
- Less than 15 mins
Lifted the old one out, set the new one in!
Was this helpful?
Thank you for voting!
interior lights stay on
-
Rich from Pequannock, NJ
- Really Easy
- Less than 15 mins
-
Screw drivers
Changed door switch. Repair worked for a few days but re-occured. Possibly the other switch is bad .
Was this helpful?
Thank you for voting!
Interior Light Would Not Turn Off
-
Thomas from Bay Shore, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
Tape off the light button so door alarm does not go off. Take off the clear light shield and remove the light bulbs. Be careful, bulbs may still be HOT!! With Phillips head screw driver unscrew the light plate assy. Drop it down in a comfortable position. Disconnect the connector, unscrew the thermal sensor and remove light assy. Install
... Read more
new light assy into light plate assy. There is no thermal senor in the new assy. Snap light plate assy back into place and install the two screws previously taken out. Install bulbs and clear cover. Remove tape from light door switches and you are done. Lights should go on and off when door buttons are pushed in and out.
Read less
Was this helpful?
Thank you for voting!