EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

GLGFS86DQC Frigidaire Range - Instructions

All Instructions for the GLGFS86DQC
91 - 105 of 317

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
replaced theoriginal power cord.
1 person found this instruction helpful.
  • Blanca from Union City, NJ
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
moved the stove forward and removed old cord by uncruing two small screw and on ploged the all and replaced with the new one.
Was this helpful?
Thank you for voting!
Oven would not light
1 person found this instruction helpful.
  • Stephen from Pittsburgh, PA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
After diagnosing the problem, I entered the Tappan Model #, found the part needed, and ordered from Part Select. On receipt (2 day delivery), I followed the instructions enclosed with the ignitor, and within 30 minutes, had everything up and running. Thanks PART SELECT!
Was this helpful?
Thank you for voting!
oven wouldn't light uneven temp.
1 person found this instruction helpful.
  • Paul from Akron, NY
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers, Socket set
had to remove burner bolts holding igniter were stripped cut two wires replaced igniter using two self tapping screws put wires together using wirenuts Honey making cookies right now thanks already told friends about you
Was this helpful?
Thank you for voting!
my oven wouldn't light
1 person found this instruction helpful.
  • david from granville summit, PA
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers, Wrench set
first i removed the bottom of the oven [inside the oven] ,the part was right there,i removed 2 screws and unpluged the wires,then i cut the wire ends off the old part and used the wirenuts that came with the new one to hook them to the new part,then put it back in place,put the screws back in put the bottom back in and was done
Was this helpful?
Thank you for voting!
Oven would not heat.
1 person found this instruction helpful.
  • Jody from Storrs Manfield, CT
  • Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
Turned the gas and the electricity off to the gas range. Took the two large screws out in the back of the range holding on the first pan. Have to look for them. Took off the single nut holding on the second pan. Used nut drive #10 to take off nuts. Be careful you do not lose them. Took off inoperative unit. Cut wires to unit. Stripp ed wires which connect to range. Put new unit on and tightened nuts with nutdriver. Spliced wires together and put on wire nuts securely. Taped them to the wires. Put the second pan back, then the first pan. Turned on gas and electricity to test.
Worked fine. Found that the old unit was cracked and had a piece missing. Must use flashlight. Be safe.
Was this helpful?
Thank you for voting!
occasional failure to light-wife didn't trust it.
1 person found this instruction helpful.
  • Carroll from Jackson, MI
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Removed oven door. (two screws)
Removed racks.
Removed oven floor. (two finger screws)
Removed diverter (V) tray. (one nut)
Removed small panel @ left lower back of oven
(1 screw) to access elect. power disconnect.
Disconnected power.
Removed element (two square drive screws)
Snipped and stripped ol d wires, connected new
with ceramic wire nuts supplied.
Installed new element, reversed proceedure.
Oven lights in 10 seconds. Wife happy!
Probably 40 minutes, could do it again in15-20
once you know what tools to lay out.
Was this helpful?
Thank you for voting!
would not light oven
1 person found this instruction helpful.
  • Richard from Huston, TX
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers, Socket set
take off the old by unsceawing it scraw thenew one onput the wires down the back throw the hole put the wires to gather and cap tham plug the elect. back in and turn it on for to test it wow it worked he he ...richard
Was this helpful?
Thank you for voting!
Oven would not come on, broiler worked and so did the burners
2 of 4 people found this instruction helpful.
  • Jackie from Palmdale, CA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires...
And re-connected the same way.
Peice of cake..

Thank You..
Was this helpful?
Thank you for voting!
oven would not light
2 of 4 people found this instruction helpful.
  • larry from 775, TX
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
pulled drawer out and took old igniter off and replaced it
Was this helpful?
Thank you for voting!
oven would work intermittently
1 person found this instruction helpful.
  • Michael from Chicago, IL
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
remove bottom pan, remove gas second cover, loosen nuts on ignitor, cut wires near the ignitor end for extra slack, connect new wire of ignitor, screw on wire caps, reattach ignitor, replace covers and finished. Very easy repair.
Was this helpful?
Thank you for voting!
Oven Would Not Light
1 person found this instruction helpful.
  • Michael from Houston, TX
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Removed broiler pan drawer,removed two screws on element unplugged wires,installed new one. ,Tried oven, works like it did when new. It couldn't have been easier,plus I saved a bunch of money thank you partselect mike m.
Was this helpful?
Thank you for voting!
oven took longer and longer to ignite ,then just stopped.
1 person found this instruction helpful.
  • marc from troy, MI
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
took out the cove plate inside oven. romoved old igniter load.cutt and stripped new wire to new ignighter , using ceramic wire nuts supplied. reinstalled all and voila. it's as good as new. PS just for safety sake always unplug appliance from power.
Was this helpful?
Thank you for voting!
oven would not lite
1 person found this instruction helpful.
  • Walter from Danville, IL
  • Easy
  • 15 - 30 mins
  • Nutdriver
First i removed the broiler door and then I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and cut the two wires. I strip the ends ,connected the new unit with ceramic nuts that was provided an reconnected the unit. all was done in less than 30 min. EASY!!! plug the stove back in and WORKED PERFECTLY. note i receive the unit the same day it shipped....WOW
Was this helpful?
Thank you for voting!
ignitor wears out, tenants use the stoves as heat sorce
1 person found this instruction helpful.
  • jODY from GREAT FALLS, MT
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Opened the oven, removed the bottom plate located the ignitor within arms reach, removed two screws and a snap out part. replaced with the new ignitor and put the stove bottom on and waala...DONE
I have ordered all my parts from Parts Select and have never had a problem. Thank you. Jody in Montana
Was this helpful?
Thank you for voting!
oven would not allow gas to flow for igniter to light
1 person found this instruction helpful.
  • charles from bossier city, LA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
removed broiler front by depressing the indents on the door slides, removed two screws holding igniter cut wires on old igniter and spliced new igniter to existing wires with supplied wire nuts then reinstalled new igniter and tested have been using oven ever since
Was this helpful?
Thank you for voting!
All Instructions for the GLGFS86DQC
91 - 105 of 317