EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

GLEF388GBA Frigidaire Range - Instructions

All Instructions for the GLEF388GBA
46 - 60 of 125

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Right - front dual element not working.
4 of 5 people found this instruction helpful.
  • Douglas from VIRGINIA BCH, VA
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
With no install instructions (NOT good for diy-ers), looked through reviews and watched video for help. Replacement part - not same as original. Had to use magnifying glass to id the terminals / take a picture before disassembly. reassembled - found out terminals are different & black wire is too short. Took off element - rotated the clip s one number counter clockwise, reassembled - removed black wire from harness for extra reach. Hooked up, lowered top for test. power on - everything OK. Power off - complete assembly. Power on - test. Seems to be good. When I called customer service for assistance because there was no instruction, they told me I should contact a local appliance repair person. (big joke).
Was this helpful?
Thank you for voting!
Repaired Oven Range Light Bulb
3 of 3 people found this instruction helpful.
  • Alan from SAN MATEO, CA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
The bulb has a plastic clear cover. That cover can just be carefully removed using a screwdriver. It's held in by a metal bracket. After you remove the cover. You'll just need to replace the bulb and then re-install the cover and bracket.
Was this helpful?
Thank you for voting!
Oven wasn’t heating
3 of 3 people found this instruction helpful.
  • Felicia from FORT MILL, SC
  • Very Easy
  • 15 - 30 mins
  • Nutdriver
Used instruction video & replaced part.
Was this helpful?
Thank you for voting!
Oven wires arced and caused the terminal block to melt and become detached from the back of the range
3 of 3 people found this instruction helpful.
  • Daniel from Falmouth, MA
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers, Wrench set
Removed the wires that I could, then terminal block. Installing the new terminal block was very easy; however the wires that arced were fused to the terminal bock screws and needed to be cut and new connectors had to be put on the wires to allow them to be reattached to the block safely.
Once all was replaced and reinstalled the oven has worked great. The length of the repair was increased because of the melted parts and having to run to the store to get the new wire connectors big enough to fit on the wires. If we were simply replacing the block and had not encountered the melted ends, it would have been a very quick and easy repair.
Was this helpful?
Thank you for voting!
My five-year-old Frigidaire Gas stove was giving an F 10 code.
4 of 7 people found this instruction helpful.
  • Tracy from Summerville, SC
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
I looked up the problem on YouTube and it said it was the oven temperature probe was going out. So I ordered the probe and it was shipped out, received within two days. Took out a few screws on the back of the stove installed it, put it all back together and it’s working perfect.
Was this helpful?
Thank you for voting!
Range not heating properly
4 of 7 people found this instruction helpful.
  • Eloisa from SPOKANE VLY, WA
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
The youtube video clearly described how to remove the back panel and how to replace the probe.
The repair took maybe 20 minutes to complete and 1/2 of that time was spent cleaning behind and underneath the range!
Range is working perfectly now!
Was this helpful?
Thank you for voting!
Oven was over heating. In bake mode broiler would glow red and didn’t cut off after preheat
3 of 4 people found this instruction helpful.
  • James from S CHESTERFLD, VA
  • Very Easy
  • 15 - 30 mins
  • Nutdriver
Removed 4 screws on back cover removed 1 screw holding probe and unplugged the probe took it out and installed new probe.
Was this helpful?
Thank you for voting!
When I was cleaning the oven the plastic clock timer overlay melted.
4 of 7 people found this instruction helpful.
  • Nicholas from McHenry, IL
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
I removed the back panel on the stove. Then I removed the switch plate, and pulled the melted plastic overlay off and replaced it with the new one.
Was this helpful?
Thank you for voting!
Lens cover for the oven light
3 of 4 people found this instruction helpful.
  • Larry from COZAD, NE
  • Really Easy
  • 30 - 60 mins
Very easy just had to pull the wire up that holds it secure.
Was this helpful?
Thank you for voting!
Change on e of the inside glass
4 of 7 people found this instruction helpful.
  • Ronald from Ozone Park, NY
  • Easy
  • 1- 2 hours
  • Screw drivers
removed the screws holding the front part of the door and from there worked my way, untill the third glass.
It took a couple hours, my first time,. Overall easy,
Was this helpful?
Thank you for voting!
The part I ordered has 5 connections and the part to be replaced has 7 connections. I had to ask a friend who is expert in electrical wiring to help.
2 of 2 people found this instruction helpful.
  • Phin from HARRISBURG, PA
  • Difficult
  • 1- 2 hours
  • Pliers, Screw drivers
My friend used a tester to determine where each wire was supposed to connect to. I'm not sure what he did with the extra connections.
Bottom line is this part should work but you need an expert to do it for you because it's, like I said, not exactly like the one to be replaced.
Was this helpful?
Thank you for voting!
EOC FAILED
2 of 2 people found this instruction helpful.
  • obadiah j from SAINT CHARLES, MO
  • Really Easy
  • 30 - 60 mins
  • Socket set
I removed the panel on the back of the range, with a small socket head. Then I removed the old EOC. I took a photo of the wire layout to help, when I connected the new EOC, just a smart step. Connected the NEW EOC, replaced all screws and the panel.
Was this helpful?
Thank you for voting!
Stove was dropped and had broken, bent frame and adjuster feet
2 of 2 people found this instruction helpful.
  • Paul from PORT ORANGE, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
New ones fit perfectly. Take a minute to bend the frame straight. Then and I used oversize screws on the replacement parts as the drop had stripped out the screw holes of the frame.
Was this helpful?
Thank you for voting!
Range displayed error code F10
2 of 2 people found this instruction helpful.
  • Timothy from Palm City, FL
  • Very Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Unplugged range; removed back cover; removed old oven probe. Installed new probe; replaced cover; connected power and turned on range - that simple. My only issue was probe was shipped in bubble rap and unit was slightly damaged (bent). Once straightened, the probe could be installed. Probe should have been shipped in sturdy cardboa rd cylinder or box. I called customer service, they were very nice, and noted my feedback on my account in case the unit fails prematurely.
Was this helpful?
Thank you for voting!
The range element was not coming on
2 of 2 people found this instruction helpful.
  • William from BENTON, IL
  • Really Easy
  • 15 - 30 mins
  • Socket set
After settling that it was the Surface Element Switch, ordering and securing the switch, the first step was to disconnect the power to the Oven/Range. Next pull out the Range and remove the back and disconnect the switch from the top of the Range. Using the new switch I removed the wire connectors from the old switch and reconnected them to the new switch in the same spot that they came from. After connections were secure I reattached the switch to the back of the Range and reattached the back of the Range. When everything was back in place the power source was reconnected and that was it.
Was this helpful?
Thank you for voting!
All Instructions for the GLEF388GBA
46 - 60 of 125