Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
None
5 of 5 peoplefound this instruction helpful.
Keineth from DALLAS, TX
Very Easy
Less than 15 mins
Pliers, Screw drivers
Took the one off that was leaking and put the other one on
Was this helpful?
Thank you for voting!
The pump filter leaked after cleaning it out. Would work with teflon tape, but wanted to see if a new part would eliminate the need to wrap it every time.
5 of 5 peoplefound this instruction helpful.
Sandra from Livonia, MI
Very Easy
Less than 15 mins
Unscrewed the old part; screwed in the new part and said a quick prayer - LOL! The part worked great, but I wanted to mention how quickly I received the part! I would definitely order from this company again!
Was this helpful?
Thank you for voting!
Lower Balance Weight Broken Concrete Internals
5 of 6 peoplefound this instruction helpful.
David from FLORENCE, MA
A Bit Difficult
1- 2 hours
Nutdriver, Pliers, Screw drivers, Socket set
The web interface is nice, however in this situation it references the wrong part which was not known until the item arrived. Customer Service handled return, however I had to call LG directly to confirm correct part number (LG p/n 4866ER0004A = p/n PS3524040) but this was only after LG also gave wrong p/n. When replacement part arriv
... Read moreed the internal concrete had a crack in it. The part is basically a plastic shell that is filled with concrete. However the opening (about 1 x 4) is left open and with the concrete having a crack in it the piece will vibrate together and continue to break down over time (which is what happened to the original one) Before installing I chose to fill opening with epoxy and a plastic layer, then covered with electrical tape to seal it in. I feel this item is poorly designed from LG. Additionally this item was poorly packaged by PS when shipping which caused the damage (it weights about 15 lbs and was allowed to float around in a large over-sized box filled with large air pillows). I have photos but no way to upload here.
Read less
Was this helpful?
Thank you for voting!
Drum spring broke
4 of 4 peoplefound this instruction helpful.
Todd from LAKEWOOD, CO
Really Easy
30 - 60 mins
Pliers, Screw drivers
Removed top panal found broken parts and pieces, replaced spring and plastic spring holder. Straightened out and reattached drum front boot.
Was this helpful?
Thank you for voting!
Making noise on the spin cycle
4 of 5 peoplefound this instruction helpful.
Ritchie from HOUMA, LA
A Bit Difficult
More than 2 hours
Pliers, Screw drivers, Socket set, Wrench set
Disassembled washer, replaced bearings, seals and gasket. Watched instructional video to familiarize myself with the repair. Followed all steps as recommended, repair was straight forward without any surprises. Hardest part was removing the drum from the machine, somewhat heavy. Disassembled and replaced all bearings, seals, spider and ga
... Read moresket. Reinstalled in reverse order. Note: Upon tear down, I found the seal was pushed out, causing the bearing failure. I also found that the seal was installed incorrectly from LG. They have the seal lip facing the bearings, should be facing the water. This repair seems to be difficult, but was fairly self explanatory. All plug ins are color coded, all hoses are accessible with little effort. If you have basic skills you should be able to handle this repair.
Read less
Was this helpful?
Thank you for voting!
grinding noise, at spin
3 of 3 peoplefound this instruction helpful.
Joe from OCEANSIDE, CA
Really Easy
More than 2 hours
Screw drivers, Socket set
I followed instructions, posted by this site ln so doing, I saved at least $ 800. Dll`s
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Watched a step-by-step video on you tube and ordered parts. I took apart the washer by following the steps in the same video to disassemble. Once apart I took the opportunity to pressure wash the tub and housing then let dry overnight. It takes a minute to get the washer apart then back together, but no part was difficult. No special
... Read moretools were needed. Before I put the back and top panel on, I hooked a garden hose with a splitter to the supply lines and ran a cycle in the garage just to make sure all connections were nice and tight. No issues. Washer is running like a champ since. As you take the washer apart for this type of repair you basically unhook or remove every single part that could go out. Great opportunity to familiarize yourself with other components for the "next time".
Used Youtube to look for a set of repair instructions. From start to end 35 min.
The difficult part was getting the door back on. Only 1 Youtube video I watched stated Do not remove the 2 center screws at the top. Wish I had seen that video first.
Overall very easy to do.
Was this helpful?
Thank you for voting!
Door would not close because the part that was in the door that held it closed kept falling out.
2 of 2 peoplefound this instruction helpful.
Bobbie Joan from ASHEVILLE, NC
Really Easy
Less than 15 mins
Order the part through PartsSelect. It arrived in a few days and I (an 81 year old woman) replaced it within minutes with no help needed. It was super easy.
Was this helpful?
Thank you for voting!
the magnetic door plunger fell on the floor,
2 of 2 peoplefound this instruction helpful.
Lois from ARIZONA CITY, AZ
Really Easy
Less than 15 mins
the magnetic door plunger fell on the floor, would not stay in place and did not hold the door closed. Received a new on, put it in place. works just like it is supposed to. took all of 2 seconds. great service from Partselect. got the new part in less than a week.
My Orders
