Models > FEATHERLITE

FEATHERLITE Trimmer - Overview

Models starting with FEATHERLITE

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Fuel Line – Part Number: 530069247
Fuel Line
★★★★★
★★★★★
(4)
PartSelect #: PS9472280
Manufacturer #: 530069247
This is the replacement fuel line 25 Inch for several OPE products that use small engines. The fuel line carries fuel from the tank to the carburetor. Over time, the fuel line can become badly clogged...
$6.62
  In Stock
Engine Fuel Filter – Part Number: 530095646
Engine Fuel Filter
★★★★★
★★★★★
(2)
PartSelect #: PS9285148
Manufacturer #: 530095646
This fuel filter is for lawn and garden equipment engines. Fuel filter cleans the fuel before it reaches the carburetor. Work in a well-ventilated area when installing this part. Drain the fuel...
$4.99
  In Stock
Tank Purge Line – Part Number: 530069216
Tank Purge Line
★★★★★
★★★★★
(2)
PartSelect #: PS9472264
Manufacturer #: 530069216
This part is the replacement tank/purge line for your outdoor power equipment. It is made of clear plastic and is sold individually. The tank/purge line returns excess fuel from the carburetor to the ...
$6.21
  In Stock
Spark Plug (Rcj-8Y) – Part Number: 952030150
Spark Plug (Rcj-8Y)
PartSelect #: PS9484192
Manufacturer #: 952030150
This genuine Spark Plug, RCJ8Y, is sold individually, comprised of steel and ceramic, and is white and silver in color. The function of the spark plug is to ignite a mixture of air and fuel in the com...
  No Longer Available
Spark Plug (RCJ6Y) – Part Number: 952030249
Spark Plug (RCJ6Y)
PartSelect #: PS9484195
Manufacturer #: 952030249
The manufacturer-certified white and silver Spark Plug RCJ6Y ignites the air-fuel mixture inside the combustion chamber of your engine. Consult your manual or check your model number to determine if t...
  No Longer Available
Fuel Cap (w/ retainer) – Part Number: 530014347
Fuel Cap (w/ retainer)
★★★★★
★★★★★
(1)
PartSelect #: PS9468748
Manufacturer #: 530014347
The Fuel Cap with retainer, often simply known just as the fuel cap, keeps fuel from splashing out of your tank and debris from entering it. Black in color, it is sold individually and made of plastic...
$8.71
  In Stock
Fuel Pick-up Ass
Fuel Pick-up Ass'y.
PartSelect #: PS9971446
Manufacturer #: 530095646
  No Longer Available
Trigger – Part Number: 530058000
Trigger
★★★★★
★★★★★
(1)
PartSelect #: PS9969962
Manufacturer #: 530058000
$6.62
  On Order
Carb Gasket/Diaphragm – Part Number: 530069844
Carb Gasket/Diaphragm
★★★★★
★★★★★
(1)
PartSelect #: PS9472427
Manufacturer #: 530069844
Note: The beige piece pictured has been redesigned. It no longer has the four corner holes. It now only has 2 corner holes at a diagonal.
$18.68
  On Order
Air Filter Foam – Part Number: 530036575
Air Filter Foam
PartSelect #: PS9968951
Manufacturer #: 530036575
  No Longer Available
Fuel Tank Assembly – Part Number: 545103802
Fuel Tank Assembly
★★★★★
★★★★★
(1)
PartSelect #: PS9482536
Manufacturer #: 545103802
This OEM fuel tank assembly includes the fuel lines, tank, fuel cap, and fuel filter, which must be replaced when your tank is leaking fuel due to everyday wear and tear. The assembly is comprised mos...
$18.68
  In Stock
Rope (3 ft.) – Part Number: 530069232
Rope (3 ft.)
PartSelect #: PS9472269
Manufacturer #: 530069232
The chainsaw starter rope is a three-foot-long white rope that is approved by the original equipment manufacturer, and which wraps around the recoil pulley and is pulled to start the engine. Installat...
$7.46
  In Stock

Common Symptoms of models starting with FEATHERLITE

[Viewing 2 of 2]
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Engine stops after a few seconds or minutes
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Both the Fuel line and the Engine fuel line, where dry rotted.
1) While still attached to the fuel tank, I first sized up the old fuel lines with the newer fuel lines.
2) With a pair of needle nose players, I then removed the old dry rotted fuel ?? lines, from the fuel tank.
3) I cleaned the fuel tank and around the carburetor area, to insure that there was no debris, that could possibly fall into the path of the new fuel lines installation.
4) I then installed the smaller one of the fuel lines, so that it would be out of the way, of the larger fuel line. I Pulled the fuel line through the smaller hole in the fuel tank, with needle nose players. I pulled the smaller fuel line out through the fuel tank filler hole, attached the fuel filter to the smaller fuel line. I Made sure that the fuel filter was extended to the furthest end of the fuel tank bottom. Six inches in all. I then attached the smaller fuel line to the carburetor.
5) I Installed the larger fuel line, followed the same procedures as the smaller fuel line.
6) Both fuel lines where cut on an angle for easy installation. No lubricant was necessary.
7) I filled up the fuel tank with fresh fuel and oil, new air filter and spark plug. It started on the first pull. Amazing.
Parts Used:
Fuel Line Tank Purge Line Engine Fuel Filter
  • Victor from SCOTTSVILLE, KY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Socket set
36 of 45 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fuel and Purge lines had disintegrated
Disassembled it and cleaned fuel tank. Cut and ran new fuel lines, installed filter and reassembled. Parts fit perfectly and got running after not running for over 20 years.
Parts Used:
Fuel Line Tank Purge Line Engine Fuel Filter
  • Casper from ERATH, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
22 of 29 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Clogged muffler
Remove the 4 screws holding the rear motor casing. Then you can take the easy route and drill through the front motor housing with a 3/8 to 1/2 bit in order to access the front muffler screw. If you want to work harder you must remove the motor from the shaft, remove the clutch assembly (this requires a long 15t torx bit, removing the spark plug to stuff the piston with rope or rag to seize up the piston, and then removing the front motor casing to access the front muffler screw). Once you access both muffler screws remove them with the t20 torx driver. Install the new muffler with the small gasket inside the housing, and the larger gasket/heat shield between the muffler and the motor.
Parts Used:
Assembly-Muffler/Shield
  • Rosanne from BRIDGEWATER, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!