FS730V-AS07 Kawasaki Engine - Parts

This O-ring, also known as a round seal, is an authentic OEM part used in lawn and garden equipment. It is a small, circular, rubber ring that helps create an airtight seal between the oil filter filler and engine to prevent leaking and ensure adequate lubrication. It is common for the O-ring to become brittle and lose its elasticity due ...Read moreto aging, and exposure to chemicals and high temperatures in the equipment. If an O-ring fails, it can result in oil leakage, leading to reduced equipment performance, and potential damage to the surrounding components. Carefully the oil ring off the sealing surface and clean the area thoroughly to ensure a proper seal for the new O-ring. Lightly lubricate the new O-ring and press it on to the sealing surface.

The Chamber Gasket, also known as the Carburator Gasket, is a dark grayy, rubber part, certified by the original equipment manufacturer. It measures two inches, and is an individually sold part. It is installed using a wrench and screwdriver, and has been rated as Easy to install by customers. This part attaches to the carburator float ...Read morechamber, and secures the chamber to the float inside the carburator. If broken, due to fatigue or drying out, there will be fuel leaking from the carburator. If broken, leaking, dryed out, or taken apart, the part should be replaced. Refer to your owners manual or model number to ensure you are choosing the correct part.

This high-quality manufacturer-sourced part is made for use with Kawasaki engines commonly installed on lawn and garden equipment. It helps to provide a tight seal between the crankcase and the crankshaft. Over time it may wear out and begin to crack eventually causing oil leaks and requiring a replacement. This high-quality seal is made ...Read moreof durable rubber material and is sold as an individual component. You will need a wrench set to take the engine apart and perform the repair. For the exact location and the correct installation, refer to the appropriate diagrams of your model.

This is half of a collet. You will need to order two to receive a whole collet.

A muffler gasket, also known as an exhaust gasket, is a seal between the exhaust manifold and muffler within an engine, and it is used to reduce vibrations and noise, and prevent exhaust leaks. This gasket is sold as an individual part and is designed for use within lawn mowers, tractors, and various other types of engines. If you notice ...Read moreor smell fuel, increased noise or vibrations, and/or black carbon buildup around the gasket, muffler, or exhaust, then the muffler gasket is likely worn down or damaged and in need of replacing. Regular maintenance and inspections can prevent further any further damage, and help you identify issues earlier. To replace this gasket, you will likely need a socket wrench and screwdriver to remove the muffler and replace the gasket.

This is an authentic OEM sourced part which is specially designed for Kawasaki engines that are commonly installed on a variety of lawn and garden equipment. It is the part that rotates inside the shroud producing airflow to cool down the engine. Unfortunately, over time it will wear out or get damaged eventually requiring a replacement. ...Read moreKeep in mind this high-quality fan is made of durable plastic and is sold individually. Make sure to refer to the appropriate diagrams for your model to ensure the correct repair procedure.

This is a original Kawasaki replacement part made for use with small engines. The purpose of this bolt is to secure fan housing. It is a hex head bolt and it is sold individually. Replacing this bolt you should use a properly sized socket wrench.

It is an authentic item that is supplied by original equipment manufacturer for Kawasaki engines. This replacement screen is secured to the fan housing helping to protect the fan from dirt and debris. It is made with durable high quality plastic and it is sold individually, please note the hardware to secure it is all sold separately.

This voltage regulator is a white, 4.5 x 2.5 inch, manufacturer-certified part. It is individually sold, and electrical in nature. It can be installed using a screw driver, and is rated as Easy to repair. It attaches close to the stator and maintains voltage to the battery. If damaged, it may cause components such as the fuel pump, ign...Read moreition system, or other electrical parts to not function properly. The engine may start sputtering, have a rough idle, or poor engine performance. This means the part can no longer maintain voltage, and must be replaced. Consult your owners manual, model number or wiring diagram to ensure you are choosing the correct product.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Kawasaki engines commonly installed on lawn and garden equipment. This is the special insulator-gasket which is utilized to provide an air-tight seal for the carburetor, make sure to refer to the appropriate diagrams of your model for the ...Read morecorrect location and application of this hardware. It is a high-quality item which is made of durable composite material and is sold individually.