EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

FGF328GSG Frigidaire Range - Instructions

All Instructions for the FGF328GSG
106 - 120 of 123

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The oven control board did not respond and was kicking out the GFI
  • MELVIN from ST LOUIS, MO
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I replaced the oven control board. I used the old overlay because I could not find a model # but I was able to locate the exact replacement part. it took some to find, but it paided off.Thanks for your help. I Got the replacement part # from the old control board.
Was this helpful?
Thank you for voting!
wrong temp when baking.
  • John from Hiawassee, GA
  • Easy
  • 1- 2 hours
  • Socket set
removed back. discovered wrong connector on probe. Cut the connectors off and spliced with small butt connector. Took me longer to find the tools and connector than to do the repair. The wires are very small and require a very small butt connector. Tips by the sales rep and previous customer were helpful. Great service. Will try Pa rtSelect for Cub Cadet and Yamaha OB parts. Thanks. John
Was this helpful?
Thank you for voting!
Clock/Oven program didn't work.
  • Julie from Doyle, CA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Very easy, just pulled the oven out and unscrewd the back, took the old program out plugged the new one in and it works just fine.
Was this helpful?
Thank you for voting!
Convert NGas to LP
  • Randall from Fernwood, ID
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
The Conversion Kit was throughall with extra fittings and good instructions. My problem was haveing to pay a lisence gas installer $65.00 an hour to do a safety & pressure test. Maybee future Conversion kits would include a cheap disposable pressure tester with hose, then it would be a complete done job by the owner.
Was this helpful?
Thank you for voting!
bought a used gas range i have propane it was natural gas
  • Vernon from Moorehead, KY
  • Easy
  • 30 - 60 mins
  • Socket set
changed the orfices with a 10mm socket and driver handle used an adjustable wrench to tighten the orfice in the bottom of the oven approximately 45 minutes we were using the range
Was this helpful?
Thank you for voting!
All Instructions for the FGF328GSG
106 - 120 of 123