EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

FGF328GSG Frigidaire Range - Instructions

All Instructions for the FGF328GSG
76 - 90 of 123

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
I broke the inner oven glass door
0 of 1 people found this instruction helpful.
  • Lewis from Loveland, CO
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
The repair shop wanted 150 dollars to fix it. I ordered the glass and replaced it myself. It was really easy and all I need was a screwdriver. It took me about 30 minutes total.
Was this helpful?
Thank you for voting!
Oven would not get up or stay up to selected temperature
0 of 1 people found this instruction helpful.
  • wondell from Winnemucca, NV
  • Easy
  • Less than 15 mins
  • Nutdriver
Pull stove out to get behind it,unplug temperature probe plug. Remove temp probe from oven by removing the screw holding it in place on back of oven. Cut plug off temp probe unit leaving as much lead wire as possible on plug end. Strip wires on new probe and end of plug wires(one quarter inch). Then I used two small butt connectors to joi n the stripped wires,one for each pair of wires. Two small wire 'nuts' may also be used as the connections are outside the oven and not exposed to the heat of the oven while it is in operation. Hope this helps the inexperienced 'do it yourselfers'--:)
Was this helpful?
Thank you for voting!
Inside window broken
0 of 1 people found this instruction helpful.
  • Gerald R from Baltimore, MD
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
First I took the door off. Then I removed about a dozen screws. Than my wife insisited on cleaning the other two windows! Since the inside window was broken ;a lot of grease had gotten on the other two windows.She said she would never have another chance. After that I put everything back together. It took about an hour all together.
Was this helpful?
Thank you for voting!
inner glass in door shattered
0 of 1 people found this instruction helpful.
  • connie from plainwell, MI
  • Easy
  • 30 - 60 mins
  • Screw drivers
my dad and i did it together and it was easy. just had to remove the screws on the outside oven door pull the door apart, remove the old glass and put in the new and put the screws back in. hardest part was to get some of the screws out because they had been in so long.
Was this helpful?
Thank you for voting!
needed 4 hands
0 of 1 people found this instruction helpful.
  • Lois from Waretown, NJ
  • A Bit Difficult
  • 1- 2 hours
  • Screw drivers
It went okay but I had to have some help putting it back together. One person held the glass while the other person tightened the screws.
Was this helpful?
Thank you for voting!
replace inner glass on oven door
0 of 2 people found this instruction helpful.
  • Albert from Bakersfield, CA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Very simple with instructions supplied, Removed two screws inside on back of door, then removed four more screws to get to inner glass,removed broken glass installed new glass, replaced all screws.Job completed. very good instructions,Thank You.
Was this helpful?
Thank you for voting!
broken glass in oven door
0 of 2 people found this instruction helpful.
  • carol from jerseyville, IL
  • Easy
  • 15 - 30 mins
  • Screw drivers
took screws on outer sides and then removed glass put in new glass replaced screws done
Was this helpful?
Thank you for voting!
Two of theTop gas burners would not spark
0 of 2 people found this instruction helpful.
  • Robert R from Lewistown, PA
  • Easy
  • Less than 15 mins
Took 6 screws out holding the top on from the sides. Lifted the top front, popped out the spark module, Took 6wires off & reversed the processed to install the new one. I was really amazed when I ordered it Wednesday and it arrived on Friday. Believe me I bookmarked this site.
Was this helpful?
Thank you for voting!
Old rusty worn out oven racks
  • June from Mt. Vernon, AL
  • Really Easy
  • Less than 15 mins
Removed the old oven racks and put in the new ones.
Was this helpful?
Thank you for voting!
old oven racks were nasty!
  • Richard from Fort Wayne, IN
  • Really Easy
  • Less than 15 mins
We recently purchased condo and WhiteWestinghouse range needed some love. the old racks were not in very good shape so we ordered new.
Was this helpful?
Thank you for voting!
Temp did not match readout.
  • John from Columbiana, OH
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Replaced temp probe and checked OK. This model did not have a full back as the instructional video showed. No cover to remove at all. Only suggestion might be to include two wire nuts of proper size. Average wire nut would be too big. Fortunately, I happened to have a couple.
Was this helpful?
Thank you for voting!
Oven Wouldn't Turn On (F-10) Displayed
  • DAVID from PALMDALE, CA
  • Easy
  • Less than 15 mins
  • Screw drivers, Socket set
I thought it was the temperature sensor. I was wrong it was the e. O. C. It wasn't that hard to change,just alot of small screws. Once I plugged it in I tryed to turn on the oven it turned on right away. Only thing is I wish the part was cheaper & also there should have been a white cover on it. Not peel off the old one and re-use i t???? The oven is only 2yr's old, but never the less it got fixed. . . Works fine now.
Was this helpful?
Thank you for voting!
I needed an extra oven rack to bake more at one time.
  • Sally from Cincinnati, OH
  • Really Easy
  • Less than 15 mins
I just installed the extra rack and re-arranged the existing ones. Works great!
Was this helpful?
Thank you for voting!
no heat in oven
  • BARBARA from NORTH PORT, FL
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
replaced temp probe per your suggestion. No improvement! checked both heating elements with ohm meter. OK Next suggestion was replace circuit boards. Bought new range for less than cost of 2 oven/range control boards.
Was this helpful?
Thank you for voting!
oven wouldn't work
  • Steve from Hiram, OH
  • Easy
  • 15 - 30 mins
  • Nutdriver
Pulled stove away from the wall and unplugged it. Removed probe and cut the wires because the connection clip on the new probe was different from the original. Leave the wires as long as possible because you will need the extra length to splice the clip from the old probe to the wires on the new one. Replaced probe and plugged the oven ba ck in. Done.
Was this helpful?
Thank you for voting!
All Instructions for the FGF328GSG
76 - 90 of 123