Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FEX831CS0 > Parts

FEX831CS0 Frigidaire Washer Dryer Combo - Parts

All parts for the Frigidaire Washer Dryer Combo FEX831CS0

Below is a list of all parts for the Frigidaire Washer Dryer Combo FEX831CS0. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the FEX831CS0
43-56 of 183
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$33.37

Handle

This handle is used on washer/dryer combos.

$30.97

Splash Cover Seal

The tub ring seal or splash cover seal is used for washers. This part seals the tub cover to the outer one and prevents water leakage from around the tub ring. If your seal is damaged and you are experiencing water leakage, it is best to replace this part. Refer to the manual provided by the manufacturer for further installation instructions. Remember to unplug your washer from the power source before starting this installation process.

$30.82

Tension Spring

This tension spring works in conjunction with the idler pulley. The spring is part of your top load washing machine assembly. The most likely reasons for needing to replace the ten...

$19.92

Agitator Cap Seal

$4.25

Washer Capacitor

The capacitor is used on the washer motor to help the motor get up to speed quickly before transferring power to the run capacitor.

$40.86

Water Inlet Hose Assembly

This water inlet hose is used in washers. The hose connects the washer water inlet valve to the water supply in your home. There are two solenoids on the valve, which are referred to as coils, and there are two wires attached to each solenoid that should be labelled to ensure they are properly reconnected after replacing the new hose. Over time, your hose can begin to leak which can lead to floods. Replacing your hose earlier on can prevent this problem. Refer to the diagram provided by the manufacturer for installation instructions. Remember to unplug your appliance from the power source before beginning this installation project.

$34.90

Timer Knob

This knob accepts a double-flat shaft.

$30.02

Agitator Cap

$9.26

Door Hinge

Sold individually.

$8.91

SPRING

$6.78

Screw

This screw is a little under an inch long.

$6.36

PLUG

$267.80

Timer

The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.

$65.48

Cycling Thermostat

All Parts for the FEX831CS0
43-56 of 183