EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

FEF387CCTC Frigidaire Range - Instructions

All Instructions for the FEF387CCTC
121 - 135 of 886

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The oven went out, element wouldn't turn off.
2 of 2 people found this instruction helpful.
  • Howard from McPherson, KS
  • Really Easy
  • Less than 15 mins
  • Nutdriver
It's a simple project. Remove old element and replace it with new one. Access is easy. Only one tool needed. What impressed me was how fast the part got here, like the next day after I ordered it.
Was this helpful?
Thank you for voting!
Oven element broke
2 of 2 people found this instruction helpful.
  • Irving from Germantown, MD
  • Easy
  • Less than 15 mins
  • Nutdriver
It took me more time to find the right tool then to remove and replace the element. If I can do it anybody can do it. Removed two (2) screws with a nutdriver. Detached the element replaced with new element and replaced screws. Easy job!
Was this helpful?
Thank you for voting!
oven door not closing completely
2 of 2 people found this instruction helpful.
  • David from BIRDSBORO, PA
  • Very Easy
  • 15 - 30 mins
older range required no tools to repair, pulled old gasket out of notches at bottom of door, popped clips out of pre-drilled holes, folded new gasket ends {2 inches} and pushed into door, pushed clips into place.
Was this helpful?
Thank you for voting!
Old heating element broke
2 of 2 people found this instruction helpful.
  • Paul from Ellenville, NY
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Drank a beer, grabbed a screwdriver & tried to remove the two screws that held the element in place. The screws were old and when I turned them, they stripped instantly. This required another beer. Eventually I used pliers to grip the sides of the screws to remove and reinsrt them. When I finished the oven worked great, so I celebrated wi th another beer.
Was this helpful?
Thank you for voting!
Broiler element burnt out. It literally broke off & emitted white-hot sparks.
2 of 2 people found this instruction helpful.
  • MG from ENCINITAS, CA
  • Easy
  • 30 - 60 mins
  • Screw drivers
First thing I did was turn off power to the range at the circuit breaker. The repair was generally easy with the exception that 1 screw holding the broiler element support was "welded" into the oven ceiling. I stripped the screw trying to get it out. Fortunately, I had a special tool that allows one to grip the outer edge of the screw w hile turning it --- and that's how I got it apart. Once the broiler element support was off, I removed 2 screws holding the broiler element itself to the oven wall and carefully pulled the broiler element out from the oven wall and detached the wire clips connecting the wires to the broiler element. I reattached the clips onto the new element and installed the new element back into the oven wall. I then reattached the broiler element support using a another screw (because I decimated the original one). I then turned the circuit breaker back on and turned the broiler on. Woila. My broiler works again! Special thanks to the people at this site who were very helpful in seeing to it I got the correct broiler element. The original ordered broiler element was delivered to the wrong address. The folks at this site sent me another one. To make a long story short, they saw to it I got the correct part. I highly recommend this site based on my experience with them.
Was this helpful?
Thank you for voting!
Element burnt out and cracked
2 of 2 people found this instruction helpful.
  • Robert from LOUISVILLE, KY
  • Very Easy
  • 15 - 30 mins
  • Nutdriver
I simply followed the instructions in your video. i shut down the power to the oven via the breaker panel, removed the two quarter inch screws with a nut driver, pulled out the old element exposing the two wire leads,disconnected one lead at a time and duct taped each lead to the oven wall,. Then removed the old element and replaced th e new one in reverse order. Voila! It works great. This is the second element I replaced in this oven over the years. This site was prompt on shipping the new element (about 3 days since I ordered on a Sunday).. It was well packed and arrived on time and I even got an e-mail letting me know it arrived! How cool is that?! I've been a customer for a few years now and plan to be a "forever" customer. Thanks for saving the day! You ROCK!
Was this helpful?
Thank you for voting!
Oven bake element failed.
2 of 2 people found this instruction helpful.
  • Gerald from PALM COAST, FL
  • Easy
  • 15 - 30 mins
  • Nutdriver
I watched the video of the repair. It was very easy; removed 2 screws; disconnected 2 push-on tabs; removed the element; and then reversed the operation. Be sure to turn off the circuit breaker that powers the oven before you start the repair. Turn it back on when finished and test the oven.
Was this helpful?
Thank you for voting!
bake element burnt out.
2 of 2 people found this instruction helpful.
  • james from WOOTON, KY
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
removed screws,unplugged terminal leads,installed new one,back in business.
Was this helpful?
Thank you for voting!
Bottom oven element non-functional
2 of 2 people found this instruction helpful.
  • Louis from GAINESVILLE, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Shut off power - throw breaker. Oven access easier with door removed - requires removal of two Phillips head screws. Remove two screws holding element in place using 1/4" socket. Pull element & wires out and pull slide in connectors out (had to hold the wire end with needle nose pliers}. Installed element by reversing the removal proc edures. Also good time to clean oven.
Was this helpful?
Thank you for voting!
Broken handle on the lower door
2 of 2 people found this instruction helpful.
  • Robert from Albuquerque, NM
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I removed the screws holding the element in place. Then I screwed in the new part. No problem at all.
Was this helpful?
Thank you for voting!
Old part was replaced by mfg’r. Wiring different. No drawings or any info was included to show wiring.
2 of 2 people found this instruction helpful.
  • Nelson from FRUITHURST, AL
  • Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Socket set
I was forced to call in a pro repairman. Will cost me at least $150 for part and repairman. I could have done job if instructions on how to rewire had been included.
Was this helpful?
Thank you for voting!
The right Drawer Glide was broken.
2 of 3 people found this instruction helpful.
  • Fred from Gregory, MI
  • Really Easy
  • Less than 15 mins
The simplest repair ever! I just snapped it in and put the drawer back - fixed. I hope I have other repairs this simple.
Was this helpful?
Thank you for voting!
Bake element wouldn't heat.
2 of 3 people found this instruction helpful.
  • Earl from Elkin, NC
  • Easy
  • Less than 15 mins
  • Nutdriver
The problem was caused by the owner placing an aluminum catch pan under the bake element. The failure of the element was where it was in contact with the pan. The repair involved removing two screws pulling out the element to access the wires. The connectors were the pull off type so I just disconnected the wires from the old element and placed them on the new element, pushed the element back in place and replaced the two retaining screws. I suggested that the owner not place anything in contact with the bake element. Be sure to up-plug the stove plug before attempting repair.
Was this helpful?
Thank you for voting!
Broken drawer slide
2 of 3 people found this instruction helpful.
  • Michael from Jacksboro, TN
  • Really Easy
  • Less than 15 mins
Remove drawer. Insert new slide. Install drawer.
Was this helpful?
Thank you for voting!
one of the dual heater on the stove top would not come on
2 of 3 people found this instruction helpful.
  • Daniel from Succasunna, NJ
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
I tried to operate the rocker switch which switches from one element to two or vise versa. There was no resistance on the switch. I fiured it was defective. After I received the switch from Partsselect, I pried the old one out , remove the two wires, which were attached to the switch by spade terminals. I re-attached the wires to the new switch and pressed it, by hand, into the reage
console.
Was this helpful?
Thank you for voting!
All Instructions for the FEF387CCTC
121 - 135 of 886