- Home
- FEF352CATC
- Instructions
FEF352CATC Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bake Element caught on fire
4 of 7 people
found this instruction helpful.
-
Judy from Spencerville, OH
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
First we turned off the electic, then we took the back off the stove and pulled the wire off the bad element then replace the new element. It was very easy to do.
Was this helpful?
Thank you for voting!
N/A
4 of 7 people
found this instruction helpful.
-
Dineshbhai from Rincon HWY21, GA
- A Bit Difficult
- Less than 15 mins
-
Screw drivers
I had open back cover and remove the switch than replace new switch. Makesure cable conection.
Was this helpful?
Thank you for voting!
I forgot to remove something I had saved in the oven, planning to remove it before using the range.
3 of 4 people
found this instruction helpful.
-
Marilyn from Clearwater, FL
- Easy
- Less than 15 mins
Very simple. Removed oven rack that had melted residue on it and replaced it with the new one from your company. I want to tell you that the delivery service I received was just geat. Took less than 48 hours to arrive at my home from the time I placed the order on line. Keep up the good work and I will be happy to share my experience
... Read more
with those in need of you services. Thanks. Marilyn Kasson
Read less
Was this helpful?
Thank you for voting!
Heating element burned out
3 of 4 people
found this instruction helpful.
-
Pat from GREELEY, CO
- Very Easy
- Less than 15 mins
All you do it unplug the old one and plug in the new one.
Was this helpful?
Thank you for voting!
Lens cover for the oven light
3 of 4 people
found this instruction helpful.
-
Larry from COZAD, NE
- Really Easy
- 30 - 60 mins
Very easy just had to pull the wire up that holds it secure.
Was this helpful?
Thank you for voting!
Burner switch work sometime.
3 of 4 people
found this instruction helpful.
-
junius from WICOMICO, VA
- Really Easy
- 1- 2 hours
-
Nutdriver
I follow the video on your site
Was this helpful?
Thank you for voting!
Bake element bad, broiler element OK.
5 of 10 people
found this instruction helpful.
-
Gerry W. from Oxford, IA
- Really Easy
- 30 - 60 mins
-
Screw drivers
Unplugged the stove first !
Removed bake element ; (2 screws), looked OK,
measured with an Ohm meter, measured "open".
Also, removed rear cover (6-screws), wires not burnt. Ordered new element-rec'd next day! My wife installed it and replaced rear cover. Works great (oven!) and about $10 cheaper and quicker than from ... Read more a local dealer!
Removed bake element ; (2 screws), looked OK,
measured with an Ohm meter, measured "open".
Also, removed rear cover (6-screws), wires not burnt. Ordered new element-rec'd next day! My wife installed it and replaced rear cover. Works great (oven!) and about $10 cheaper and quicker than from ... Read more a local dealer!
Read less
Was this helpful?
Thank you for voting!
Original Element physically broke
2 of 2 people
found this instruction helpful.
-
Beverly from WEATOGUE, CT
- Very Easy
- Less than 15 mins
There is an installation video , but it was so easy, and if you clean your drip pans from those inevitable spills you can do this. I have zero mechanical abilities and I did. The website makes it easy to find your part, and the original literature you got with your appliance will direct you where to find the
... Read more
Model # and serial # on your Frigidaire Range. Order your part on line, get it in the mail and insert the Element yourself.Very happy with my transaction.
Read less
Was this helpful?
Thank you for voting!
Heating element went out
3 of 5 people
found this instruction helpful.
-
ROBERT from MAINEVILLE, OH
- Very Easy
- Less than 15 mins
-
Nutdriver
Simply...2 hex head screws removed. Unplug old element...plug in new element...place 2 screws back into place...test
Was this helpful?
Thank you for voting!
Oven element burnt out.
3 of 5 people
found this instruction helpful.
-
Dave from LOUDONVILLE, OH
- Very Easy
- Less than 15 mins
-
Nutdriver
Remove 2 screws. Pull element out. Slide 2 wires off. Just do in reverse it's done.
Was this helpful?
Thank you for voting!
Burner not controlable
2 of 2 people
found this instruction helpful.
-
Royce from KEENE, TX
- Very Easy
- Less than 15 mins
-
Screw drivers
Removed rear panal, removed screws from of switch. Unplued wires and installed new switch and put back together. Very easy.
Was this helpful?
Thank you for voting!
Burner rings did not fit.
2 of 2 people
found this instruction helpful.
-
JOANNE from IMPERIAL, PA
- Very Easy
- Less than 15 mins
The replacement rings were so easy to install, and the little clip to hold them in place is really smart. Made my old range look really nice again. I thought the cost for the four rings was a bit high but they were well worth it. Thank You
Other Parts Used:
Was this helpful?
Thank you for voting!
problem pulling out bottom tray on range
2 of 2 people
found this instruction helpful.
-
rosetta from COLUMBIA, VA
- Really Easy
- Less than 15 mins
just put in slot
Was this helpful?
Thank you for voting!
broke
2 of 2 people
found this instruction helpful.
-
Richard from COFFEYVILLE, KS
- Very Easy
- Less than 15 mins
-
Socket set
took out the old one, screwed in the new one. very easy.
Was this helpful?
Thank you for voting!
Bake element burned out
2 of 2 people
found this instruction helpful.
-
Mark from LAUREL, MD
- Very Easy
- Less than 15 mins
-
Nutdriver
This is an easy repair, as described in several other replies. One important addition to what has already been described. Very important to turn off the breaker or unplug the range. One terminal of the range is connected to a hot wire and the range housing is grounded. You may not manage to electrocute yourself, but you could cause and ar
... Read more
c that damages the housing or connector. Turn off the power. Beyond that, simple. Unscrew two 1/4" screws with a nut driver, slide the element out and disconnect the wire connectors. Reverse procedure to install the new element and turn the power back on. Preheat briefly to burn off any odor. Very easy repair.
Read less
Was this helpful?
Thank you for voting!