- Home
- FEC30C4AQE
- Instructions
FEC30C4AQE Frigidaire Cooktop - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Old pans/bowls were corroded
48 of 55 people
found this instruction helpful.
-
John from Nisswa, MN
- Really Easy
- Less than 15 mins
Very easy---simply unplug the burners, remove the old pans and replace with the new ones
I was extremely pleased with the easy ordering and prompt delivery of parts that actually fit as they should!
I was extremely pleased with the easy ordering and prompt delivery of parts that actually fit as they should!
Other Parts Used:
Was this helpful?
Thank you for voting!
Old discolored drip pans that would not clean up.
17 of 20 people
found this instruction helpful.
-
Elizabeth from Smyrna, TN
- Really Easy
- Less than 15 mins
I simply removed the old drip pans and inserted the new ones which matched and fit perfectly.
I'm glad I found you on line. Your service was fast and the whole transaction was easy!! Thanks.
I'm glad I found you on line. Your service was fast and the whole transaction was easy!! Thanks.
Other Parts Used:
Was this helpful?
Thank you for voting!
Burner would stay on high heat only. Repairman wanted $278.00 to fix...I bought the switch for under $30.00 delivered and spent 10 minutes fixing it myself.
15 of 21 people
found this instruction helpful.
-
Fred from Redmond, OR
- Easy
- Less than 15 mins
-
Screw drivers
Turned power off to the stove at breaker box. Pulled the 4 plastic knobs off of the stove. Unscrewed the 4 round parts that are directly under each knob to gain access to the switches. Took the two small phillips screws out holding the bad switch. Installed the wires from the bad switch to the new switch and then reinstalled everything in
... Read more
reverse order. I saved over $200.00 by doing this repair myself with only two screwdrivers.
Read less
Was this helpful?
Thank you for voting!
Burner not cycling Went to Hight heat even at low settings
13 of 20 people
found this instruction helpful.
-
Henry from Georgetown, SC
- Really Easy
- 15 - 30 mins
-
Screw drivers
Disconnected power,(Breaker OFF}
Followed directions as directed by instructions. Removed mounting screws for burner control Switch panel. Disconnected wire leads to switch. Replaced Switch and reassembled. All directions were well established. Your Quick delivery of the Switch was next day delivery. Down time approximately ... Read more 30 minutes in time for wife to fix dinner. Thanks for your help!
Followed directions as directed by instructions. Removed mounting screws for burner control Switch panel. Disconnected wire leads to switch. Replaced Switch and reassembled. All directions were well established. Your Quick delivery of the Switch was next day delivery. Down time approximately ... Read more 30 minutes in time for wife to fix dinner. Thanks for your help!
Read less
Was this helpful?
Thank you for voting!
Replacement bowels didn’t fit
10 of 11 people
found this instruction helpful.
-
Russell from ROEBUCK, SC
- Really Easy
- Less than 15 mins
Pulled the heating elements out took the bowels out that didn’t fit, threw them away and replaced them with the perfectly fitting bowels from this site and replaced the heating elements.
Other Parts Used:
Was this helpful?
Thank you for voting!
Needed new drip bowls.
7 of 9 people
found this instruction helpful.
-
Robert from Oradell, NJ
- Really Easy
- Less than 15 mins
Pulled out heating elements. Removed old drip bowls. Inserted new drip bowls and re-installed heating elements.
I was extremely pleased with the very quick delivery of needed parts.
I was extremely pleased with the very quick delivery of needed parts.
Other Parts Used:
Was this helpful?
Thank you for voting!
Couldn't find replacement trays locally. Part Select was very helpful and prompt in shipping.
5 of 7 people
found this instruction helpful.
-
Rosemary from St. Albans, ME
- Really Easy
- Less than 15 mins
Just placed the chrome bowl trays in place and was good to go. They look very nice.
Was this helpful?
Thank you for voting!
Coroded drip pans
4 of 5 people
found this instruction helpful.
-
Lori from Old Town, FL
- Really Easy
- Less than 15 mins
Removed heating elements and replaced drip pans. And by the way, this is the only 'pans' I could find to fit. Thanks.
Other Parts Used:
Was this helpful?
Thank you for voting!
Drip bowels needed to be replaced
3 of 3 people
found this instruction helpful.
-
Francine from OTEGO, NY
- Very Easy
- Less than 15 mins
I just took the old ones out and replaced them with the new ones. It took less than 5 minutes.
Other Parts Used:
Was this helpful?
Thank you for voting!
Worn Drip Bowls
2 of 2 people
found this instruction helpful.
-
River Oaks Town Homes from DES MOINES, IA
- Very Easy
- Less than 15 mins
Pulled out the old drip bowls and replaced with the new. A simple snap!
Other Parts Used:
Was this helpful?
Thank you for voting!
Rusted Drip Bowls
1 person
found this instruction helpful.
-
Carolyn from OCEAN PARK, WA
- Very Easy
- Less than 15 mins
This range is probably 30+ years old. Still works great. Just needed to replace the Drip Bowls.
Other Parts Used:
Was this helpful?
Thank you for voting!
Drip bowls needed replacing
1 person
found this instruction helpful.
-
Doris from SUN CITY, AZ
- Very Easy
- Less than 15 mins
Removed the old ones and inserted the new ones.
Other Parts Used:
Was this helpful?
Thank you for voting!
Old drip pans had turned to rusty lace.
1 person
found this instruction helpful.
-
Helen from PAWLEYS ISL, SC
- Very Easy
- Less than 15 mins
Unplugged elements. Removed old pans. Wiped out holes. Inserted new pans, replaced elements.
Other Parts Used:
Was this helpful?
Thank you for voting!
old drip bowls
1 of 2 people
found this instruction helpful.
-
Vera from Snow Camp, NC
- Very Easy
- Less than 15 mins
replaced old drip bowls with new ones
Other Parts Used:
Was this helpful?
Thank you for voting!
Pulled the heating element on each burner installed the drip pans.
1 of 2 people
found this instruction helpful.
-
Sharon from AURORA, MO
- Very Easy
- Less than 15 mins
They fit perfectly for this stove. I had bought some drip pans but definitely not the correct pan. Saved time and about same at stores price. Great service thank you will order elements next. Pull heating elements remove drip pans and replace with new pans ,replace heating element. Done
Other Parts Used:
Was this helpful?
Thank you for voting!