This chrome drip bowl is designed for use with electric cooktops and ranges. This drip bowl is sold individually. At the widest point this part has a diameter of approximately 10 inches. It sits beneath the surface burner element. It catches any drips or spills coming from the cookware on your burner. Because the cooktop is a high-traffic...Read more area of the kitchen, these bowls often get damaged, or get so dirty they can no longer be adequately cleaned. When replacing this part you need to remove the burner element. While you have it out we recommend inspecting the terminals and the element for any corrosion, arcing, or discoloration. Any of those things could be a sign of a bigger problem, and it indicates that the element and terminal block should be replaced.
The drip bowl catches grease and spills that come from cooking on your stove top. They are located under the heating elements. Drip bowls are often neglected and can become rusted and cracked. If your drip bowl is damaged, it could allow grease, food, or other spills to drip inside your range. This could become a fire hazard. This 6 inch ...Read morechrome drip bowl fits most electric ranges. Before you replace your damaged drip bowl, make sure the element is turned off and cool to the touch. To replace the drip bowl, remove the element, replace the current drip bowl, and reattach the element. This part is sold individually.
This genuine OEM 6-inch electric surface burner element is designed to provide reliable heat for smaller cooking areas on your range or cooktop. Featuring a durable coil design with plug-in terminals, it delivers consistent heating and supports even cooking performance. Ideal for replacing a worn or non-functioning element, it helps resto...Read morere proper operation and efficiency. For safe installation, always disconnect power and handle the element with care.
I simply removed the old drip pans and inserted the new ones which matched and fit perfectly. I'm glad I found you on line. Your service was fast and the whole transaction was easy!! Thanks.
Burner would stay on high heat only. Repairman wanted $278.00 to fix...I bought the switch for under $30.00 delivered and spent 10 minutes fixing it myself.
15 of 21 peoplefound this instruction helpful.
Fred from Redmond, OR
Easy
Less than 15 mins
Screw drivers
Turned power off to the stove at breaker box. Pulled the 4 plastic knobs off of the stove. Unscrewed the 4 round parts that are directly under each knob to gain access to the switches. Took the two small phillips screws out holding the bad switch. Installed the wires from the bad switch to the new switch and then reinstalled everything in
... Read more reverse order. I saved over $200.00 by doing this repair myself with only two screwdrivers.