EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

EJA314 Caloric Range - Instructions

All Instructions for the EJA314
91 - 105 of 122

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
I needed to replace my burner pans.
  • Robert from Wilton, CA
  • Really Easy
  • Less than 15 mins
The Drip Pans are a cinch to replace with no tools necessary. The best part is that the Web Site is extremely easy to use, and the parts arrived two days after being ordered.
Was this helpful?
Thank you for voting!
drip pan were burnt out
  • Delroy from Miramar, FL
  • Really Easy
  • Less than 15 mins
simply remove the burner take out the drip pan and bowl individually. Install the new one and replace the burner. no tool was used.
Was this helpful?
Thank you for voting!
Drip bowls were all rusted.
  • Robin from Seneca, SC
  • Really Easy
  • Less than 15 mins
Removed old rusted drip bowls and put in the new ones. Very easy to do and needed no tools. It made my 25 plus Jenn Air look new again!
Was this helpful?
Thank you for voting!
old drip bowl was worn out
  • Richard from Germantown, MD
  • Really Easy
  • Less than 15 mins
new drip bowl fit perfectly and was a snap to install.
Was this helpful?
Thank you for voting!
Burner was slow heating at times. Moved back burner to front still same thing.
  • Gail M from Lockport, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Unscrewed screw holding bracket. Used side cutters to cut wires. Replaced the bracket, put the shrink wrap on wires, twisted wires together and held with wire caps. Shrunk the wrap with lighter. I'm a 67 year old female.. No problems.
Was this helpful?
Thank you for voting!
part of original burner not working
  • SUSAN K from SEDALIA, MO
  • Really Easy
  • Less than 15 mins
slide new burner in slot and turned on stove. Worked perfectly.
Was this helpful?
Thank you for voting!
Burners quit working
  • Brenda from Brazoria, TX
  • Really Easy
  • Less than 15 mins
Bought two new replacement burners,they work great!
Was this helpful?
Thank you for voting!
stove burner no longer would heat up burner element
  • Bonnie from Price, UT
  • Easy
  • 15 - 30 mins
  • Screw drivers
I removed the burner element, then the drip pan. I took off the old block. Then I had to strip the old wires. Then I put on the heat sleeve, then attached the new wires to the old wires with nuts. Put heat sleeve over this and heated with lighter. Then put everything back together.
Was this helpful?
Thank you for voting!
Top element not heating
  • Mary from Montgomery, AL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Ordered wrong part at first caused me to blow out two elements. With the help of PartSelect I was able to get the right surface block terminal and replaced both of them, then found out I had a bad switch, they got the switch within 2 days I had my stove working good again. Thanks to PartSelect. Also watched the video which was very helpf ul ML
Was this helpful?
Thank you for voting!
Drip bowls tarnished.
  • Jennifer from Albion, NE
  • Really Easy
  • 15 - 30 mins
Remove heating element coils. & old drip pans. Install the new drip pans and reinsert the heating elements and insure all elements were level. For aesthetic reasons I replaced all the drip pans - 2 x 8" & 2 x 6".
Was this helpful?
Thank you for voting!
one burner that would not heat and others that would not out out much heat
  • Charles from Villa Ridge, MO
  • Easy
  • 30 - 60 mins
  • Screw drivers
I noticed that one of the burner blocks was completely burned and the others were corroded. I ordered blocks for all four burners. Installation was easy except for one block. The screw holding the bracket to the range top was completely corroded in place. I used a correct size easy-out, which is a left hand tap and drill, to remove th e screw. That took about five minutes, including tracking the easy-out down in one of my many toolboxes. The entire replacement of four blocks took about one and a half hours. Stove top cooks like new on all burners! The part kit had all the right parts and they fit like a glove!
Was this helpful?
Thank you for voting!
electric surface unit not working
  • vincent from Martinsville, VA
  • Easy
  • 30 - 60 mins
  • Screw drivers
After turning off circuit breaker to the stove, I removed all surface units , removed the 4 screws holding the top and lifted up. The plug in was burned out (the wire was burned). Look at the old plug-in so as to be able to match the new one and insert the pre- crimped end of wires into the block and the block into the metal holder that matches your old one. (The kit comes with 2 different metal holders)After this, cut out the old wires and wire nut the new wires with the stove wires. Put shrink wrap protector on the wire nuts and heat to shrink it tight.attach the block to the stove top and wa la its done. Very easy.
Was this helpful?
Thank you for voting!
All Instructions for the EJA314
91 - 105 of 122