EJA314 Caloric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
burner not working
-
gene from kent, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
burner was shorting out replaced part works great
Was this helpful?
Thank you for voting!
burner would not heat up the connection was bad
-
Earl from Union Mills, NC
- Really Easy
- Less than 15 mins
-
Screw drivers
loosened the screw holding the block pulled it out toget to wire cut it about 4 inches long followed the inst.with block kit and it was a breeze. burner working fine now should have did it sooner.
Was this helpful?
Thank you for voting!
Burner keep coming on and going off had a short in burner plug-in block.
-
Judith from Staunton, IL
- Really Easy
- Less than 15 mins
-
Screw drivers
Turned off stove breaker. Unscrewed burner from stove top, took out burner and spill pan. Lifted top of stove, cut the wire as instructed and put all parts together as instructed. Placed everything back together as instructed. I did it myself!
Was this helpful?
Thank you for voting!
Plug block was broken
-
Mark from Hillsboro, OR
- Easy
- 15 - 30 mins
-
Screw drivers
I removed the entire burner assembly to avoid having to turn things off at the breaker - the whole assembly can be removed completely from the stove I had. Once it was out and disassembled, the toughest part was putting the new wires into the new block correctly. Once that was done, I had to select the right mounting bracket - there were
... Read more
2 in the kit. Easy, just attention to detail. The rest of the instructions were easy to follow, re-doing the wires. The re-assembly was trivial, and it worked first time!
Read less
Was this helpful?
Thank you for voting!
Burners did not get hot or went on and off
-
Boyd from kalamazoo, MI
- Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
After carefully inspecting existing burner receptacles, I unscrewed them, raised and propped stove top. Determined which bracket to use from new kit and proceeded to cut and strip wires, twist ends together with supplied ceramic caps and heated shrink wrap on that junction. Works great. BTW got parts in 2 days in great shape and good dir
... Read more
ections.
Read less
Was this helpful?
Thank you for voting!
two of the burners were working intermittently
-
Kevin from Desoto, MO
- Really Easy
- 15 - 30 mins
-
Screw drivers
I shut off the breaker checked for power then cut old plugs making sure to allow a little slack. Tightened down wire nuts put on a couple wraps of electrical tape and that was it. Burners work great now I would reccomend this product to anyone with a similar problem.
Was this helpful?
Thank you for voting!
The drip pans needed replacing.
-
Alison from Carnation, WA
- Really Easy
- Less than 15 mins
Put in the new drip pan -- which are really nice shiny ones.
Other Parts Used:
Was this helpful?
Thank you for voting!
Dirty drip bowls
-
Paul from Carnegie, PA
- Really Easy
- Less than 15 mins
Just remove old bowls from range top and put new ones. That is all ... just super simple! :)
Other Parts Used:
Was this helpful?
Thank you for voting!
Dirty drip bowl
-
Paul from Carnegie, PA
- Really Easy
- Less than 15 mins
Remove old drip bowl from the range and put a new one back.
Was this helpful?
Thank you for voting!
Surface burner block corroded
-
Teresa from Kasson, MN
- Really Easy
- Less than 15 mins
-
Screw drivers
It was a very easy fix. I followed the instructions that came with the kit and cut the original cable. Everything you need is in the kit; very few parts. Piece of cake and saved a lot of money an appliance repair person would have charged. This burner works better than the rest. I'm seriously considering replacing the other three blocks.
Was this helpful?
Thank you for voting!
Blocks were broken
-
James J from Sweet Grass, MT
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
The four kits arrived, use of a pliers and shink wrap and side cutters...strip wires, twist wires connect wire ties, shrink wrap...little fire, plug the elements...done...four in about ten minutes...Instructions in each package...no problem...very easy...saved twice the money or more...Thanks for the parts...recommend this site purchase..
... Read more
.parts arrived very timely...J. Iriwn
Read less
Was this helpful?
Thank you for voting!
needed a new drip bowl and couldn't find ons that fit exactly but you had it
-
Elsie from Garner, NC
- Really Easy
- Less than 15 mins
I removed the old one and put in the new one. Works great!!!!!!!!!!!!
Was this helpful?
Thank you for voting!
To Old Needed To Be Replace
-
ROSARIO from MESQUITE, TX
- Really Easy
- Less than 15 mins
Actualy I just removed the old ones and replace them with the new ones . And thank you for your prompt delivery I found some one I can trust . Thanks again . Mrs bolanos
Other Parts Used:
Was this helpful?
Thank you for voting!
rusty pans
-
Stewart from Hanover, PA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
simply remove the old and install the new; perfit fit
Other Parts Used:
Was this helpful?
Thank you for voting!
Surface Burner not working
-
Cody from Abilene, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
I lifted the stove top and cut the two wire connected to the block. Attached the new wire connectors, new block and checked to make sure it was working. The part that took the longest was getting the screw out of the mounting brracked(it was corroded on). I sprayed some WD40 and waited 5 minuts, it came loose. Then i mounted the new b
... Read more
racket and installed the burner. double checked everything and lowered the top. Done
Read less
Was this helpful?
Thank you for voting!