EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

EHD397 Caloric Range - Instructions

All Instructions for the EHD397
91 - 105 of 138

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
old drip bowl was worn out
  • Richard from Germantown, MD
  • Really Easy
  • Less than 15 mins
new drip bowl fit perfectly and was a snap to install.
Was this helpful?
Thank you for voting!
Surface burner block corroded
  • Teresa from Kasson, MN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
It was a very easy fix. I followed the instructions that came with the kit and cut the original cable. Everything you need is in the kit; very few parts. Piece of cake and saved a lot of money an appliance repair person would have charged. This burner works better than the rest. I'm seriously considering replacing the other three blocks.
Was this helpful?
Thank you for voting!
Blocks were broken
  • James J from Sweet Grass, MT
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
The four kits arrived, use of a pliers and shink wrap and side cutters...strip wires, twist wires connect wire ties, shrink wrap...little fire, plug the elements...done...four in about ten minutes...Instructions in each package...no problem...very easy...saved twice the money or more...Thanks for the parts...recommend this site purchase.. .parts arrived very timely...J. Iriwn
Was this helpful?
Thank you for voting!
circuit breaker blew
  • Richard from Sarasota, FL
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
I went to the source of power on the stove and noticed one of the terminals had come loose from the terminal block and had shorted out against the cover of the terminal junction. After prying the loose terminal off cover I ordered new terminal block and received it the 2nd day. I removed the old terminal block and replaced the part in abo ut 10 minutes..Thank you Parts Select for your easy to find diagrams and quick delivery.
Was this helpful?
Thank you for voting!
needed a new drip bowl and couldn't find ons that fit exactly but you had it
  • Elsie from Garner, NC
  • Really Easy
  • Less than 15 mins
I removed the old one and put in the new one. Works great!!!!!!!!!!!!
Was this helpful?
Thank you for voting!
To Old Needed To Be Replace
  • ROSARIO from MESQUITE, TX
  • Really Easy
  • Less than 15 mins
Actualy I just removed the old ones and replace them with the new ones . And thank you for your prompt delivery I found some one I can trust . Thanks again . Mrs bolanos
Was this helpful?
Thank you for voting!
rusty pans
  • Stewart from Hanover, PA
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
simply remove the old and install the new; perfit fit
Was this helpful?
Thank you for voting!
Surface Burner not working
  • Cody from Abilene, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I lifted the stove top and cut the two wire connected to the block. Attached the new wire connectors, new block and checked to make sure it was working. The part that took the longest was getting the screw out of the mounting brracked(it was corroded on). I sprayed some WD40 and waited 5 minuts, it came loose. Then i mounted the new b racket and installed the burner. double checked everything and lowered the top. Done
Was this helpful?
Thank you for voting!
I needed to replace my burner pans.
  • Robert from Wilton, CA
  • Really Easy
  • Less than 15 mins
The Drip Pans are a cinch to replace with no tools necessary. The best part is that the Web Site is extremely easy to use, and the parts arrived two days after being ordered.
Was this helpful?
Thank you for voting!
Elements did not fit properly.
  • myrna from homestead, FL
  • Really Easy
  • Less than 15 mins
Ordered the parts, installed.
Was this helpful?
Thank you for voting!
bad control switch for stovetop burner
  • Thomas from Two Harbors, MN
  • Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Move stove away from wall to allow working on back of stove. Unplug stove. Remove metal cover from top rear of stove. Pull control knob off of control (front of stove) Remove 2 screws holding infinite control in place (front of stove) Replacement control not identical to original control, having more terminal lugs and different physical a rrangement. I used the terminal letters as a guide for placement of wires. The letters were not exactly the same, but close enough. Re-attach control to stove with 2 screws. Re-attach back metal panel to stove. Shaft on replacement control is smaller diameter and different shape from original, so I removed ribs from inside of control knob hole and then squirted a small amount of hot glue into the hole. Smearing a small amount of cooking oil onto shaft of replacent control I then slid the control knob onto the control shaft, holding it in place until the glue cooled and set. Plug stove back in, and return stove to its position next to the wall.
Was this helpful?
Thank you for voting!
replace the cook stove's drip bowls instead of cleaning them
  • Dallas from Arlington, TX
  • Really Easy
  • Less than 15 mins
I removed the burners and then the older drip bowls of the cook stove--and then I put on the new drip bowls and put back on the burners. My mechanical skills were sufficient for the replacement of the drip bowls.
Was this helpful?
Thank you for voting!
The surface burner socket that the burner plugs into melted.
  • Gary from Chesapeake, VA
  • Easy
  • Less than 15 mins
  • Screw drivers
Cut the old wires off, removed the screw holding the clamp, installed the new parts. Problems I encountered were the wire nuts. They were too small for the wire gage of the replacement part and the original oven. I had larger wire nuts in my workshop. Also, why so many extra parts like the shrink wrap tubing, two metal clamps to hold t he socket, etc.
Was this helpful?
Thank you for voting!
I needed to replace to two 8* drip bowls on the kitchen range
  • Dallas from Arlington, TX
  • Really Easy
  • Less than 15 mins
(a) I took out (and threw away) two stained 8* chrome drip bowls on my kitchen range; (b) ti put in two new 8" chrome drip bowls on my kitchen range. I'm pleased that I was equal to the task.
Was this helpful?
Thank you for voting!
Stove needed new bowls
  • Karen from Kettering, OH
  • Really Easy
  • Less than 15 mins
Just dropped in
Was this helpful?
Thank you for voting!
All Instructions for the EHD397
91 - 105 of 138