My Orders
DW708 (Type 3) DeWALT Miter Saw - Parts
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$6.40
In Stock
O-ring
Part #034158-00
O-rings are designed to contain thousands of pounds of pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness.
There are many causes for O-Ring failure, such as pressure, friction, temperature or chemicals. The most common are:
• Extrusion and Nibbling...Read moreu> - O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps.
• Abrasion - One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that is too rough, contains grit or is too smooth to allow lubrication.
• Over Compression - O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat.
• Heat Hardening - O-ring has a pitted or cracked surface, and often is flattened on both sides. Caused by temperature exceeding o-ring capacity.
• Weather/Ozone Cracking - O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching causes similar cracking.
Read less
No Longer Available
Screw,shoulder
Part #151799-00
This is an authentic DeWalt replacement part manufactured for use with miter saws and circular saws. The shoulder screw is sometimes used to secure the spindle and gear to the upper guard. The screw is used with different types of tools, so the application of the screw can vary depending on the model of saw. This screw is available as an ...Read moreindividual replacement part, please see model diagram for part location and usage.
Read less
No Longer Available
Washer,Flat
Part #385750-00
No Longer Available
Bushing
Part #385756-00
$6.40
Special Order
Screw
Part #5140117-87
No Longer Available
Bevel Stop Pin
Part #386757-01
$60.12
In Stock
End Cap
Part #387678-00
$6.40
In Stock
Screw
Part #384127-01
This is a genuine OEM sourced replacement part used on a variety of power tools. This screw is a standard hardware which will have multiple applications based on your tool. This screw is made out of metal and it is sold individually. Requires a torx screwdriver to install or remove this screw.
No Longer Available
NP:DW708 T3
Part #386062-01
No Longer Available
Screw, Plug
Part #386112-00
$6.40
In Stock
Set Screw
Part #394034-00
No Longer Available
Base Stabilizer
Part #391246-00